Chemical composition and properties of ashes from combustion plants using Miscanthus as fuel
C. Lanzerstorfer - Chemical composition and properties of ashes from combustion plants using Miscanthus as fuel - JOURNAL OF ENVIRONMENTAL SCIENCES, Vol. 54, No. 1, 2017, pp. 178-183
Miscanthus giganteus is one of the energy crops being considered to show the potential for a substantial contribution to sustainable energy production. In the literature there is only little data available about the chemical composition of ashes from the combustion of Miscanthus and practically no data about their physical properties. However, for handling, treatment and utilization of the ashes this information is important. In this study ashes from two biomass combustion plants using Miscanthus as fuel were investigated. The density of the ashes was 2,23035 kg/m³, which was similar to the density of ashes from straw combustion. Also the bulk densities were close to those reported for straw ashes. The flowability of the ashes was a little worse than the flowability of ashes from wood combustion. The measured heavy metal concentrations were below the usual limits for utilization of the ashes as soil conditioner. The concentrations in the bottom ash were similar to those reported for ash from forest residue combustion plants. In comparison with cyclone fly ashes from forest residue combustion the measured heavy metal concentrations in the cyclone fly ash were considerably lower. Cl-, S and Zn were enriched in the cyclone fly ash which is also known for ashes from wood combustion. In comparison with literature data obtained from Miscanthus plant material the concentrations of K, Cl- and S were lower. This can be attributed to the fact that the finest fly ash is not collected by the cyclone de-dusting system of the Miscanthus combustion plants.