Person

Sascha Senck Dipl.-Biol. PhD

2018
D. Kytýř, P. Zlámal, P. Koudelka, T. Doktor, I. Kumpová, M. Vopálenský, P. Heimel, S. Mühleder, S. Senck - X-ray-based Microstructural Analysis of Low Atenuaing Biocompaible Porous Materials under Simulated Physiological Condiions - Proceedings of the 8th Conference on Industrial Computed Tomography,… more
2018
T. Fíla, J. Šleichrt, D. Kytýř, I. Kumpová, P. Zlámal, V. Rada, D. Vavřík, P. Koudelka, K. Kulawiecova, S. Senck - Deformation analysis of the spongious sample in simulated physiological conditions based on in-situ compression, 4D computed tomography and fast readout detector - Journal of Instrumentation,… more
2018
J. Kastner, C. Gusenbauer, B. Plank, J. Glinz, S. Senck - Challenges for grating interferometer X-ray computed tomography for practical applications in industry - Proceedings of the 12th European Conference on Non-destructive Testing, Göteborg, Sweden, 2018 more
2018
C. Gusenbauer, J. Kastner, M. Reiter, B. Plank, D. Salaberger, S. Senck - POROSITY DETERMINATION OF CARBON AND GLASS FIBRE REINFORCED POLYMERS USING PHASE-CONTRAST IMAGING - JOURNAL OF NONDESTRUCTIVE EVALUATION, Vol. 10921, No. 4, 2018 more
2018
S. Senck, M. Scheerer, V. Revol, B. Plank, C. Hannesschläger, C. Gusenbauer, J. Kastner - Microcrack characterization in loaded CFRP laminates using quantitative two- and three-dimensional X-ray dark-field imaging - COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2018, pp. 206-2014 more
2018
K. Trieb, A. Meryk, S. Senck, E. Naismith, B. Grubeck-Loebenstein - Immunological and morphological analysis of heterotopic ossification differs to healthy controls - BMC Musculoskeletal Disorders, Vol. 19, No. 327, 2018, pp. 1-7 more
2018
J. Glinz, P. Weißenbacher, S. Senck, A. Schrempf, D. Fürst, T. Gastinger, A. Huskic, T. Reiter, J. Kastner - Determination of pore size distribution and finite element analysis of additively manufactured Ti pedicle screws using X-ray microcomputed tomography - Proceedings of the 12th European Conference… more
2018
J. Glinz, S. Senck, J. Kastner, G. Tondi - Determination of pore size distribution in Tannin- and Lignin-based foams using Xray microcomputed tomography - Proceedings of the 8th Conference on Industrial Computed Tomography, Wels, Austria (iCT 2018), Wels, Austria, 2018, pp. 1-7 more
2018
A. Obaton, M. Lê, V. Prezza, D. Marlot, P. Delvart, A. Huskic, S. Senck, E. Mahé, C. Cayron - Investigation of new volumetric non-destructive techniques to characterise additive manufacturing parts - Welding in the World, 2018, pp. 1049-1057 more
2018
S. Senck, G. Kain, B. Lienbacher, M. Barbu, A. Petutschnigg - Water vapour diffusion resistance of larch (Larix decidua) bark insulation panels and application considerations based on numeric modelling - CONSTRUCTION AND BUILDING MATERIALS, 2018, pp. 308-316 more
2018
C. Fürst, B. Plank, S. Senck, M. Mihalic, C. Unterweger - Bio-based silicon carbide ceramics from extruded thermoset-based wood polymer composites - 18th European Conference on Composite Materials, Athens, Greece, 2018, pp. 1-7 more
2018
C. Unterweger, B. Plank, S. Senck, M. Mihalic, C. Fürst - Porous carbon templates from thermoset-based wood polymer composites as precursor for silicon carbide ceramics - Carbon 2018, Madrid, Spanien, Spain, 2018, pp. 1-2 more
2018
B. Plank, C. Gusenbauer, S. Senck, H. Höller, J. Kastner - Porosity Determination in CFRP by means of X-ray Computed Tomography Methods - Proceedings of the 12th European Conference on Non-destructive Testing, Göteborg, Sweden, 2018, pp. 1-2 more
2018
S. Senck, P. Weißenbacher, J. Kastner, T. Reiter, S. Hofstaetter, K. Trieb, E. Kranioti - Assessment of trabecular microstructure and mechanical properties in the intermediate cuneiform of healthy and diabetic patients using microcomputed tomography - 8th World Congress of Biomechanics, Dublin, Ireland,… more
2017
J. Sanctorum, E. Janssens, A. den Dekker, S. Senck, C. Heinzl, J. De Beenhouwer, J. Sijbers - A workflow to reconstruct grating-based X-ray phase contrast CT images: application to CFRP samples - Proceedings of the 7th Conference on Industrial Computed Tomography, Leuven, Belgium (iCT 2017), Leuven,… more
2017
E. Janssens, S. Senck, C. Heinzl, J. Kastner, J. De Beenhouwer, J. Sijbers - Fast Reconstruction of CFRP X-ray Images based on a Neural Network Filtered Backprojection Approach - Proceedings of the 7th Conference on Industrial Computed Tomography, Leuven, Belgium (iCT 2017), Leuven, Belgium, 2017, pp.… more
2017
B. Plank, S. Senck, S. Renner, C. Heinzl, J. Kastner - Improving the delineation of resin-rich areas in carbon-fibre reinforced polymers using phase-contrast imaging - 4th conference on X-ray and neutron phase imaging with gratings (XNPIG2017), Zurich Switzerland, Switzerland, 2017, pp. 1-2 more
2017
E. Janssens, J. De Beenhouwer, J. Sanctorum, S. Senck, C. Heinzl, J. Sijbers - Dual axis Dark Field Contrast Tomography for visualisation of scattering directions in a CFRP sample - 4th conference on X-ray and neutron phase imaging with gratings (XNPIG2017), Zurich Switzerland, Switzerland, 2017, pp.… more
2017
A. Huskic, S. Senck, A. Obaton, M. Lê, V. Prezza, D. Marlot, P. Delvart, E. Mahé, C. Cayron - Investigation of new volumetric non-destructive techniques to characterise additive manufacturing parts - WELDING, ADDITIVE MANUFACTURING AND ASSOCIATED NON-DESTRUCTIVE TESTING, Metz Arsenal, France, 2017 more
2017
J. Weissenböck, S. Senck, B. Plank, C. Heinzl, J. Kastner - Porosity Evaluation of Carbon Fiber-Reinforced Polymers with Porosity Analyzer - 3rd International Conference on Tomography of Materials and Structures (ICTMS 2017), Lund, Sweden, 2017, pp. 2 more
2017
C. Gusenbauer, M. Reiter, B. Plank, S. Senck, C. Hannesschläger, S. Renner, R. Kaufmann, J. Kastner - Multi-modal Talbot-Lau grating interferometer XCT data for the characterization of carbon fibre reinforced polymers with metal components - Proceedings of the 7th Conference on Industrial Computed Tomography,… more
2017
S. Senck, B. Plank, C. Gusenbauer, D. Salaberger, W. Santer, J. Kastner - Three-dimensional characterization of polymer foams using X-ray dark-field imaging - Proceedings of the 7th Conference on Industrial Computed Tomography, Leuven, Belgium (iCT 2017), Leuven, Belgium, 2017, pp. 1-7 more
2017
F. Prade, F. Schaff, S. Senck, F. Prade, F. Pfeiffer - Nondestructive characterization of fiber orientation in short fiber reinforced polymer composites with X-ray vector radiography - NDT & E INTERNATIONAL, 2017 more
2017
J. Kastner, C. Heinzl, B. Plank, D. Salaberger, C. Gusenbauer, S. Senck - New X-ray computed tomography methods for research and industry - Proceedings of the 7th Conference on Industrial Computed Tomography, Leuven, Belgium (iCT 2017), Leuven, Belgium, 2017, pp. 1-10 more
2017
J. Kastner, C. Gusenbauer, S. Senck, G. Rao - Talbot-Lau grating interferometer μXCT for quantitative characterization of polymeric structures by using phase and dark field contrast - APCNDT, Singapur, Singapore, 2017 more
2017
S. Senck, B. Plank, J. Kastner, V. Revol, K. Dobes, M. Scheerer - Non-destructive evaluation of defects in polymer matrix composites for aerospace applications using X-ray Talbot-Lau interferometry and micro CT - 58th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA SciTech… more
2016
G. Rao, C. Gusenbauer, S. Senck, J. Kastner - Three dimensional visualisation of barley corn seed and fish tissue using Talbot Lau grating interferometer. - Bruker micro CT user meeting 2016, Luxembourg, Luxembourg, 2016, pp. 1-5 more
2016
J. Kastner, S. Senck, B. Plank, D. Salaberger, G. Rao, C. Gusenbauer - THREE-DIMENSIONAL CHARACTERIZATION OF STRUCTURE AND DAMAGE OF POLYMERS USING A TALBOT-LAU GRATING INTERFEROMETER μ-XCT - ECCM17 - 17th European Conference on Composite Materials, Munich, Germany, 2016, pp. 1-8 more
2016
S. Senck, D. Salaberger, C. Gusenbauer, B. Plank, G. Rao, J. Kastner - Talbot-Lau grating interferometer XCT for the quantitative characterization of damage in polymers after impact and static tensile testing - 19th World Conference on Non-Destructive Testing, WCNDT 2016 , München, Germany, 2016, pp.… more
2016
C. Gusenbauer, S. Hunger, S. Senck, J. Kastner - Characterization of Tooth Samples with a Talbot-Lau Grating Interferometer μXCT Desktop Device - Proceedings 4th International Conference on Image Formation in X-Ray Computed Tomography, Bamberg, Germany, 2016, pp. 371-374 more
2016
C. Margherita , T. Sahra , K. Wiltschke-Schrotta, S. Senck, G. Oxilia, R. Sorrentino, G. Mancuso, G. Gruppioni, R. Lindner, J. Hublin, S. Benazzi - A reassessment of the presumed Torrener Bärenhöhle's Paleolithic human tooth - JOURNAL OF HUMAN EVOLUTION, Vol. 93, No. 1, 2016, pp. 120-125 more
2016
M. Tocheri, R. Dommain, S. McFarlin, S. Burnett, D. Case, C. Orr, N. Roach, B. Villmoare, A. Eriksen, D. Kalthoff, S. Senck, Z. Assefa, C. Groves, W. Jungers - The evolutionary origin and population history of the grauer gorilla - AMERICAN JOURNAL OF PHYSICAL ANTHROPOLOGY, Vol. 159, No. 1, 2016, pp.… more
2015
S. Senck, J. Kastner, B. Plank, D. Salaberger, C. Gusenbauer - Three-dimensional characterization of polymeric materials using a Talbot-Lau grating interferometer CT - Bruker microCT User Meeting, Bruges, Belgium, 2015 more
2015
J. Kastner, S. Senck, C. Gusenbauer, B. Plank, C. Hannesschläger, H. Zauner, C. Heinzl, A. Sasov - Three-dimensional characterization of fibre-reinforced polymers using a Talbot-Lau grating interferometer μ-CT und data fusion methods - XNPIG 2015 3rd Meeting of X-Ray and Neutron Phase Imaging with… more
2015
J. Kastner, B. Plank, C. Gusenbauer, S. Senck, V. Revol, A. Sasov - Talbot-Lau grating interferometer X-ray computed tomography for the characterization of fibre-reinforced polymers - Proceedings: Digital Industrial Radiology and Computed Tomography (DIR 2015), Ghent, Belgium, 2015, pp. 10 more
2015
S. Senck, M. Coquerelle - Morphological Integration and Variation in Facial Orientation in Pongo pygmaeus pygmaeus: A Geometric Morphometric Approach via Partial Least Squares - International Journal of Primatology, Vol. 36, No. 3, 2015, pp. 489-512 more
2015
S. Senck, F. Bookstein, S. Benazzi, J. Kastner, G. Weber - Virtual Reconstruction of Modern and Fossil Hominoid Crania: Consequences of Reference Sample Choice - The Anatomical Record, Vol. 298, No. 5, 2015, pp. 827-841 more
2015
S. Senck, B. Plank, J. Kastner, F. Ramadani, K. Trieb, S. Hofstaetter - Visualization of local cortical defects in Charcot foot using microcomputed tomography - The orthopaedist, Vol. 44, No. 1, 2015, pp. 8-13 more
2014
B. Plank, S. Senck, C. Fürst, H. Scharleitner, J. Kastner - Qualitative and quantitative analysis of the process chain: Wood polymer composite – C-template – C/Si/SiC-ceramic by means of X-ray computed tomography - Proceedings of Conference on Industrial Computed Tomography (iCT2014), Wels, Austria,… more
2014
B. Plank, C. Fürst, S. Senck, J. Kastner - Analysis by means of X-ray computed tomography: From wood-plastic composite via carbon templates to C / Si / SiC ceramics - German Society for Non-Destructive Testing, Potsdam, Germany, 2014, pp. 8 more
2014
S. Senck, M. Coquerelle, G. Weber, S. Hofstaetter, J. Kastner - Estimation of microstructural parameters in the proximal tibia by means of shape regression: combining high resolution X-ray computed tomography and Geometric Morphometrics - WCO-IOF-ESCEO-SEVILLE 2014, Sevilla, Spain, 2014, pp. 256 more
2014
S. Senck, C. Gusenbauer, M. Frelat, G. McGlynn, G. Weber, J. Kastner - Covariation between shape and bone microstructure in the proximal tibia in humans - Proceedings of Conference on Industrial Computed Tomography (iCT2014), Wels, Austria, 2014, pp. 321-328 more
2016
Non-destructive testing (NDT) of components by means of microcomputed tomography (XCT) is an important task in many fields, e.g. in the automotive and aerospace sector. However, the demands towards NDT… more