Person

FH-Prof. DI Dr. Gernot Zitzenbacher

2018
C. Kneidinger, G. Zitzenbacher, M. Längauer, C. Bruckbauer, J. Miethlinger - Melting of Heterogeneous Polymer Bulk Solids - Polymer Processing Society (PPS2018) Boston, Boston, United States of America, 2018 more
2018
G. Zitzenbacher, H. Dirnberger, M. Längauer, C. Holzer - Calculation of the Contact Angle of Polymer Melts on Tool Surfaces from Viscosity Parameters - Polymers, Vol. 10, No. 1, 2018, pp. 12 more
2017
M. Längauer, M. Pree, G. Zitzenbacher - A novel approach to study thermoplastic matrix materials’ impregnation behavior of woven fibres - 33rd Annual Meeting of the Polymer Processing Society, Cancun, Mexico, 2017 more
2017
G. Zitzenbacher, Z. Huang, C. Holzer - Experimental study and modeling of wall slip of polymethylmethacrylate considering different die surfaces - POLYMER ENGINEERING AND SCIENCE, 2017, pp. 8 more
2017
C. Kneidinger, M. Längauer, G. Zitzenbacher - Measuring the Friction between Polymer Pellets and Screw Surfaces, the bulk density and the melting behavior simulating the conditions in a Single Screw Extruders - Bruker Oberflächentage 2017 - FH Technikum Wien, Wien, Austria, 2017, pp. 1 more
2017
M. Längauer, G. Zitzenbacher - Study of infrared sheet heating for thermoforming fiber-reinforced thermoplastic composite parts - Polymer Processing Society (PPS2017) Dresden, Dresden, Germany, 2017 more
2017
C. Kneidinger, M. Längauer, E. Mayrhofer, G. Zitzenbacher, J. Miethlinger - Keynote Lecture: Simulation of Asymmetrical Multilayer Flat Film Coextrusion Regarding Slip at the Wall and Interfacial Slip at the Polymer-Polymer Interface - Polymer Processing Society (PPS2017) Dresden, Dresden, Germany,… more
2017
G. Zitzenbacher, M. Längauer, C. Holzer - Modeling Temperature and Time Dependence of the Wetting of Tool Steel Surfaces by Polymer Melts - INTERNATIONAL POLYMER PROCESSING, Vol. 32, No. 2, 2017, pp. 245-252 more
2017
C. Kneidinger, G. Zitzenbacher, M. Längauer, S. Schuschnigg, J. Miethlinger - The Behavior of Bulk Solids in the Solids Conveying Zone of Smooth Barrel Single Screw Extruders: Friction, Bulk Density and Pressure Anisotropy - Polymer Processing Society (PPS2017) Dresden, Dresden, Germany, 2017 more
2016
C. Kneidinger, S. Schuschnigg, G. Zitzenbacher, M. Längauer, J. Miethlinger - Solids Conveying in Lab Scale Smooth Barrel Single Screw Extruders Regarding the Material Parameters` Dependence on Pressure, Temperature and Velocity - Polymer Processing Society (PPS 32) 2016 Lyon, International Conference,… more
2016
G. Zitzenbacher, T. Bayer, Z. Huang - Influence of tool surface on wall sliding of polymer melts - INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, Vol. 52, No. 1, 2016, pp. 17-36 more
2016
G. Zitzenbacher, Z. Huang, M. Längauer, C. Forsich, C. Holzer - Wetting behavior of polymer melts on coated and uncoated tool steel surfaces - JOURNAL OF APPLIED POLYMER SCIENCE, Vol. 133, No. 21, 2016, pp. 10 more
2016
K. Liu, W. Stadlbauer, G. Zitzenbacher, C. Burgstaller, C. Paulik - Effects of surface modification of talc on mechanical properties of polypropylene/talc composites - AIP Conference Proceedings, Vol. 1713, No. 1, 2016, pp. 5 more
2016
C. Kneidinger, G. Zitzenbacher, M. Längauer, J. Miethlinger, G. Steinbichler - Evaluation of the Melting Behavior and the Melt Penetration into the Solid Bed Using a Model Experiment - AIP Conference Proceedings, Vol. 1779, No. 1, 2016, pp. 5 more
2016
C. Kneidinger, M. Längauer, G. Zitzenbacher - Sliding Wear of Polymer – Steel Pairings regarding Flame Retardant Equipped Glass Fibre Reinforced Polymers and (coated) tool steels - PMI 2016 Proceedings of the International Conference on Polymers and Moulds Innovations, Gent, Austria, 2016 more
2016
G. Zitzenbacher, M. Längauer, Z. Huang - Influence of Temperature on the Contact Angle of Polymer Melts on Tool Surfaces - Polymer Processing Society (PPS 32) 2016 Lyon, International Conference, Lyon, France, 2016, pp. 1 more
2016
M. Längauer, G. Zitzenbacher, M. Palmetshofer, T. Wagenknecht - Investigation of the influence of talc fillers on the infrared heating of polypropylene for thermoforming - Polymer Processing Society (PPS 32) 2016 Lyon, International Conference, Lyon, France, 2016, pp. 1 more
2015
M. Längauer, G. Zitzenbacher, K. Liu, C. Kneidinger, G. Schaffler, B. Purgleitner (Edlinger) - Experimental Analysis of the Influence of Pellet Shape on Single Screw Extrusion - JOURNAL OF APPLIED POLYMER SCIENCE, Vol. 132, No. 13, 2015, pp. 4167-4175 more
2015
K. Liu, W. Stadlbauer, G. Zitzenbacher, C. Paulik, C. Burgstaller - Talc-filled Polypropylene with Innovative Performance through Improved Interfaces in 4a Technologietage 2015 - Leichtbau und Composites, 2015 more
2015
K. Liu, W. Stadlbauer, G. Zitzenbacher, C. Paulik, C. Burgstaller - Investigation of talc treatment on rheological behaviour and mechanical properties of talc filled polypropylene - Danube Vltava Sava Polymer Meeting - DVSPM 2015, Gmunden, Austria, 2015 more
2015
G. Zitzenbacher - Influence of the tool surface on polymer melt rheology - 24. Leobener Kunststoffkolloquium: Festkolloquium Kunststoffverarbeitung GRL 75, Leoben, Austria, 2015, pp. 75-84 more
2015
C. Kneidinger, J. Morales, M. Längauer, K. Liu, G. Zitzenbacher - WEAR RESISTANCE OF SCREW AND MOLD MATERIALS AND PVD COATINGS FOR POLYMER PROCESSING - Danube Vltava Sava Polymer Meeting - DVSPM 2015, Gmunden, Austria, 2015 more
2015
C. Kneidinger, G. Zitzenbacher, M. Längauer, J. Miethlinger, G. Steinbichler - Evaluation of the melting behavior and the melt penetration into the solid bed using a model experiment - Polymer Processing Society Conference 2015, Graz PPS, Graz, Austria, 2015 more
2015
K. Liu, W. Stadlbauer, G. Zitzenbacher, C. Paulik, C. Burgstaller - Improved Performance of Talc-filled Polypropylene by Surface Modification with Silane Coupling Agents - Polymer Processing Society 2015, Graz, Austria, 2015 more
2014
C. Kneidinger, C. Kneidinger, G. Zitzenbacher, K. Liu - Investigation of the melting behavior of different shaped polymeric bulk solids - 6th International Conference on Polymer Behaviour, Wien, Austria, 2014 more
2014
M. Längauer, G. Zitzenbacher, C. Kneidinger, K. Liu - Influence of Solid Bulk Properties and Frictional Behavior on Solids Conveying in Single Screw Extruders - 6th International Conference on Polymer Behaviour, Wien, Austria, 2014 more
2014
K. Liu, G. Zitzenbacher, M. Längauer, C. Kneidinger - Influence of pellet shape on the external coefficient of friction of polypropylene and on the mass flow rate of a single screw extruder in PROCEEDINGS OF PPS-29: The 29th International Conference of the Polymer Processing Society - Conference Papers… more
2014
G. Zitzenbacher, T. Bayer, Z. Huang, A. Giesbrecht - Influence of tool surface on wall sliding of polymer melts - PMI 2014, Guimarães, Portugal, Portugal, 2014, pp. 237-241 more
2014
C. Kneidinger, G. Zitzenbacher, M. Längauer, K. Liu, J. Miethlinger, G. Steinbichler - CHARACTERIZING THE MELTING BEHAVIOR OF DIFFERENT SHAPED POLYMER BULK SOLIDS BY UTILIZING A MODEL EXPERIMENT WITH AN OPTICAL MEASURING SYSTEM - Proceedings of ANTEC 2014, Las Vegas, Nevada, USA, United States of America,… more
2013
T. Bayer, G. Zitzenbacher, A. Giesbrecht, J. F. Pühringer, D. Vaught - Influence of flow channel surface on melt fracture and wall sliding behavior of a polypropylene melt - PPS-29 Conference Proceedings, Nürnberg (Deutschland) / Nuremberg (Germany), Germany, 2013 more
2013
K. Liu, G. Zitzenbacher, M. Längauer, C. Kneidinger - Influence of pellet shape on the external coefficient of friction of polypropylene and on the mass flow rate of a single screw extruder - PPS 29 Proceedings, Nürnberg (Deutschland) / Nuremberg (Germany), Germany, 2013, pp. 101-105 more
2013
M. Längauer, G. Zitzenbacher, C. Kneidinger, K. Liu - Influences of the geometry of pellets and solids-conveying zone in PP-single screw extrusion on processing conditions and output - Advances in Polymer Science and Technology (APST) 3, Linz, Austria, 2013 more
2013
C. Kneidinger, G. Zitzenbacher, J. Miethlinger, G. Steinbichler - A NEW MODEL EXPERIMENT TO CHARACTERIZE THE MELTING PROZESS IN SINGLE SCREW EXTRUDERS - Advances in Polymer Science and Technology (APST) 3, Linz, Austria, 2013, pp. 1 more
2013
J. F. Pühringer, G. Zitzenbacher, C. Spreitzer - Study of the heat absorption in the thermoforming process for transparent and filled polystyrene - INTERNATIONAL POLYMER PROCESSING, Vol. 28, No. 1, 2013, pp. 14-23 more
2013
C. Kneidinger, G. Zitzenbacher, J. Miethlinger, G. Steinbichler - New approach in the characterization of the melting process in single screw plasticizing units using a model experiment - PPS 29 Proceedings, Nürnberg (Deutschland) / Nuremberg (Germany), Germany, 2013, pp. 32 more
2012
C. Kneidinger, K. Liu, G. Zitzenbacher, K. Steinbrecher - FRICTIONAL BEHAVIOR OF BIOPLASTICS AT SCREW SURFACES UNDER PROCESSING CONDITIONS - Polymer Processing Society (PPS) Americas Conference, Niagara Falls, Ontario, Canada, 2012 more
2012
K. Liu, G. Zitzenbacher, C. Kneidinger, D. Heim, G. Schaffler, B. Edlinger - Influence of surface roughness and pellet shape and size on the external coefficient of friction of polymer pellets - Proceedings FFH 2012, Graz, Austria, 2012, pp. 39-44 more
2012
C. Stallinger, J. F. Pühringer, C. Hochenauer, G. Zitzenbacher, M. Längauer, G. Metzbauer, C. Maticka - Determination of optimization potentials of an extrusion slit die used for production of polymer films by CFD-simulation - Proceedings FFH 2012, Graz, Austria, 2012, pp. 83-87 more
2012
K. Liu, G. Zitzenbacher, C. Kneidinger, W. Stadlbauer, B. Edlinger, G. Schaffler - Effect of molecular weight and pellet shape on the external coefficient of friction of different polypropylene grades - Polymer Processing Society (PPS) Americas Conference, Niagara Falls, Ontario, Canada, 2012 more
2012
M. Olbrich, G. Zitzenbacher, C. Hochenauer, C. Kneidinger, V. Lawlor - Analytical and Numerical Methods for the Design of Maddock Mixers in Single Screw Plasticizing Technology - MACROMOLECULAR SYMPOSIA, Vol. 311, No. 1, 2012, pp. 83-91 more
2011
G. Zitzenbacher, K. Liu, C. Kneidinger - Influence of surface roughness on the external coefficient of friction of polymer pellets in single screw plasticizing units. - PPS-27 (Proceedings), Marrakesh, Marokko, Morocco, 2011, pp. 5 more
2011
G. Zitzenbacher, M. Olbrich, C. Hochenauer - Analytical Calculation Model for the Design of Maddock and Helical Fluted Mixers in Plastics Processing - Proceedings of the fifth Research Forum of the Austrian University of Applied Sciences, Wien (Favoriten), Austria, 2011, pp. 4 more
2011
J. F. Pühringer, G. Zitzenbacher, C. Spreitzer - Radiation absorption of Polystyrene semi-finished products during the thermoforming process - Proceedings of the fifth Research Forum of the Austrian University of Applied Sciences, Wien (Favoriten), Austria, 2011, pp. 300-301 more
2011
J. F. Pühringer, G. Zitzenbacher, C. Spreitzer - Study of heat absorption in the thermoforming process for of transparent and filled polystyrene - PPS-27 (Proceedings), Marrakesh, Marokko, Morocco, 2011, pp. 118 more
2011
C. Hochenauer, B. Hunter, G. Zitzenbacher, M. Danner - Application of polymeric materials for solar thermal collectors - Proceedings of the fifth Research Forum of the Austrian University of Applied Sciences, Wien (Favoriten), Austria, 2011, pp. 2 more
2011
C. Hochenauer, B. Hunter, M. Danner, G. Zitzenbacher - Thermal modelling of flat plate solar collectors - Proceedings of the fifth Research Forum of the Austrian University of Applied Sciences, Wien (Favoriten), Austria, 2011 more
2011
J. F. Pühringer, C. Maier, G. Zitzenbacher - Study on the Correlation of the elongation modulus at elevated temperatures and the temperature dependent flexural modulus from DMA measurements of a PP homopolymer - Advances in Polymer Science and Technology Two, Linz, Austria, 2011, pp. 62 more
2011
M. Olbrich, G. Zitzenbacher, C. Hochenauer - Study of heat transfer in dispersive mixers at high screw speeds. - PPS-27 (Proceedings), Marrakesh, Marokko, Morocco, 2011, pp. 4 more
2011
M. Olbrich, G. Zitzenbacher, C. Hochenauer - Numerical Evaluation of the Operating Conditions of Dispersive Mixers in Single Screw Plasticizing Units - Proceedings of the fifth Research Forum of the Austrian University of Applied Sciences, Wien (Favoriten), Austria, 2011 more
2011
M. Kröppl, C. Lanzerstorfer, G. Zitzenbacher - Fly ashes from biomass incineration - Analyses of their composition with IC, ICP-OES, SEM-EDX and XRD - Proceedings of the fifth Research Forum of the Austrian University of Applied Sciences, Wien (Favoriten), Austria, 2011, pp. 244-247 more
2011
C. Kneidinger, G. Zitzenbacher, M. Olbrich, K. Steinbrecher - Friction between WPC Bulk Polymers and Metal Surfaces at High Pressures and High Velocity - Symposium for Polymerblends and Nanocomposites with biobased Components, Halle an der Saale, Germany, 2011, pp. 1-9 more
2011
B. Edlinger, G. Schaffler, C. Burgstaller, G. Zitzenbacher, C. Kneidinger - Influence of glass fibre content in polypropylene on the abrasion wear in a rectangular extrusion slit die - Advances in Polymer Science and Technology Two, Linz, Austria, 2011, pp. 1 more
2011
K. Liu, G. Zitzenbacher, C. Kneidinger, D. Heim, B. Edlinger, G. Schaffler - Influence of pellet shape and size on friction of polymer pellets in single screw plasticizing units - Advances in Polymer Science and Technology Two, Linz, Austria, 2011 more
2011
G. Metzbauer, J. F. Pühringer, G. Zitzenbacher, P. Reven, C. Kneidinger, D. Heim - A new rheological measuring die to determine the influence of the flow channel surface on wall slippage - Advances in Polymer Science and Technology Two, Linz, Austria, 2011, pp. 61 more
2011
M. Olbrich, G. Zitzenbacher, C. Hochenauer - Numerical and experimental determination of the influence of dispersive mixers on single screw pressure and temperature performance - Advances in Polymer Science and Technology Two, Linz, Austria, 2011 more
2010
C. Kneidinger, G. Zitzenbacher, A. Kögler - Determination of the Tribological Characteristics of Plastic Granulates in Plasticizing units for Plastics Processing - Proceedings FFH 2010, Pinkafeld, Austria, 2010, pp. 522-523 more
2010
C. Hochenauer, G. Zitzenbacher, M. Danner, B. Hunter, P. Orgill - Development of a Plastic Solar Thermal Collector - PMI 2010 conference book, Ghent, Belgium, 2010, pp. 8 more
2009
G. Zitzenbacher, C. Kneidinger, A. Kögler, H. Hager - Measuring the Frictional Behaviour of Polymer Bulk Solids on Screw Surfaces with a New Developed Test Apparatus - Advances in Polymer Science and Technology 1, Linz, Austria, 2009, pp. 85 more
2009
C. Kneidinger, G. Zitzenbacher, A. Kögler - Coefficient of Friction between Bulk Polymers and Different Metal Surfaces at High Pressures - Proceedings of Europes and Africas Regional Meeting 2009, Polymer Processing Society (PPS), Larnaca, Cyprus, 2009, pp. 4 more
2009
C. Kneidinger, G. Zitzenbacher - Determination of the external coefficient of friction for simulating the conveying characteristic of single screw plasticising units - International Forum of Mechatronics 2009, Linz, Austria, 2009, pp. 5 more
2008
C. Kneidinger, G. Zitzenbacher, H. Hager - Friction of Polymer Pellets at Screw Surfaces - Proceedings of Americas Regional Meeting, Polymer Processing Society (PPS), Charleston, United States of America, 2008, pp. 1-2 more
2008
D. Salaberger, J. Kastner, W. Stadlbauer, G. Zitzenbacher, R. Freytag - Determination of diameter, length and three-dimensional distribution - Proceedings of PPS-24, Salerno, Italy, 2008, pp. 1 more
2008
J. F. Pühringer, G. Zitzenbacher - Determination of the relevant material parameters for the radiation heating of semifinished plastic products for thermoforming - Welser Werkstoff-Kolloquium 2008, Wels, Austria, 2008, pp. 15-20 more
2008
G. Zitzenbacher, W. Stadlbauer, W. Schubert, P. Reven, J. Pühringer - Extrusion of Chalk-filled PE-LLD-Regranulate Blown Films by Applying Different Processing Methods - Proceedings of PPS-24, Salerno, Italy, 2008, pp. 4 more
2008
G. Zitzenbacher, W. Stadlbauer, W. Schubert - Herstellung von kreidegefüllten PE-LLD-Regranulat-Blasfolien mittels Compoundverarbeitung, Masterbatcheinmischung und Direktextrusion - Tagungsband 2. Forschungsforum der österreichischen Fachhochschulen, Wels, Austria, 2008, pp. 366-371 more
2008
T. Auinger, M. Stadlbauer, E. Pachner, W. Stadlbauer, G. Zitzenbacher - Polypropylen-Blasfolien mit langkettenverzweigtem HMS-PP: Verarbeitungsstabilität, mechanische Eigenschaften und Strukturentwicklung. - Welser Werkstoff-Kolloquium 2008, Wels, Austria, 2008, pp. 10-14 more
2008
G. Zitzenbacher - Modellierung der Transportvorgänge in Schubschneckenplastifiziereinheiten - Verlag Dr. Müller, 2008 more
2007
G. Zitzenbacher, R. Karlbauer, H. Thiel - A New Calculation Model and Optimization Method for Maddock Mixers in Single Screw Plasticising Technology - International Polymer Processing, Vol. 22, No. 1, 2007, pp. 73-81 more
2007
J. Kastner, D. Angermaier, G. Zitzenbacher, E. Schlotthauer, W. Stadlbauer - Quantitative Measurement of fibre length and distribution in fibre reinforced polymers - DGZFP Yearly Conference 2007, Fürth, Germany, 2007, pp. 345-352 more
2007
G. Zitzenbacher - A New Stress Calculation Model for the Prediction of Solid Bed Breakup in Single Screw Extruders. - Proceedings of the Europe/Africa Meeting 2007 of the Polymer Processing Society, Gothenburg, Sweden, Sweden, 2007, pp. 16 more
2007
J. Kastner, D. Angermaier, E. Schlotthauer, G. Zitzenbacher, W. Stadlbauer - µ- and nano-computed tomography for the 3-dimensional characterisation of composites - Proceedings of the Industrial Symposium Mechatronics 2007 on Sensorics, Linz, Austria, 2007, pp. 71-79 more