Science Field

Metallurgy

Science Field

2017
R. Schneider, M. Molnar, C. Schüller, S. Gelder, G. Reiter, C. Martinez - Effect of the slag composition and a protective atmosphere on chemical reactions and non-metallic inclusions during electro slag remelting of a hot-work tool steel - IFM 2017 – 20th International Forgemasters Meeting 2017, Graz,… more
2017
M. Molnar, R. Schneider, G. Klösch, C. Schüller - Influence of an protective gas atmosphere on the electro-slag-remelting of the steel 50CrMo4 - Conference Proceedings ISDM 2017, Leoben, Austria, 2017, pp. 16-24 more
2017
M. Kubin, R. Schneider - Manufacturing of Tool Steels in Tool Steels (Editors: Rafael A. Mesquita), 2017, pp. 11-39 more
2016
R. Schneider, M. Molnar, C. Schüller, S. Gelder, G. Reiter, C. Martinez - Effect of diferent Process Parameters on the Electro-Slag-Remelting behaviour of a Hot-work Tool steel - Proceedings of 10th International TOOL Conference (TOOL 2016), Bratislava, Slovakia, 2016, pp. 303-310 more
2016
M. Molnar, R. Schneider, C. Schüller, S. Gelder, G. Reiter, C. Martinez - Effect of different process parameters on the remelting behaviour of a hot-work tool steel during ESR - Proceedings of Symposium "12 years MHT", Wels, Austria, 2016, pp. 8-9 more
2016
R. Schneider - Symposium " 12 years MHT" MEtallurgy and Heat Treatment, 2016, pp. 1-27 more
2016
R. Schneider - 12 years Metallurgy and Heat Treatment at the Univ. of Appl. Sciences Upper Austria Campus Wels - a short story - Proceedings of Symposium "12 years MHT", Wels, Austria, 2016, pp. 1-5 more
2016
G. Klösch, C. Schüller, A. Paul, R. Schneider, G. Reiter, M. Zuber - Effects of different production routes on non-metallic inclusions in a case hardening steel - Proceedings of Symposium "12 years MHT", Wels, Austria, 2016, pp. 6-7 more
2015
G. Klösch, C. Schüller, A. Paul, R. Schneider, G. Reiter, M. Zuber - Modification of NMI in a case hardening steel 18CrNi8 while using different production routes - Proccedings of the 9th International Conference on Clean Steel, Budapest, Hungary, 2015, pp. 1-8 more
2015
R. Schneider, M. Mülleder, P. Zeller, P. Würzinger, G. Reiter, S. Paul - Effects of low frequency alternating currents on the electro-slag remelting process - Proc. of the 2015 Int. Symposium on Liquid Metal Processing and Casting, Leoben, Austria, 2015, pp. 18-26 more
2015
M. Kubin, B. Ofner, H. Holzgruber, R. Schneider, D. Enzehofer, A. Filzwieser, S. Konetschnik - The influence of the mould cooling temperature on the surface appearance and the internal quality of ESR ingots - Proc. of the 2015 Int. Symposium on Liquid Metal Processing and Casting, Leoben, Austria, 2015,… more
2015
R. Schneider, C. Schüller, P. Würzinger, G. Reiter, C. Martinez - Effect of a Higher SiO2-Content in the Slag for the Remelting of a Hot-Work Tool Steel on the ESR-Process - Journal of Mining, Metallurgical, Materials, Geotechnical, and Plant Engineering, Vol. 160, No. 3, 2015, pp. 117-122 more
2014
A. Paar, R. Schneider, P. Zeller, G. Reiter, S. Paul, P. Würzinger - Effect of electrical parameters on type and content of non-metallic inclusions after electro-slag-remelting - steel research international, Vol. 85, No. 4, 2014, pp. 570-578 more
2014
C. Schüller, R. Schneider, M. Mülleder, P. Zeller, S. Paul, G. Reiter, P. Würzinger - Effects of increased MgO and SiO2-contents in the slag on energy consumption and polarisation at the ESR-process - Proceedings of the XXI. Int. Students' Day of Metallurgy, Clausthal-Zellerfeld, Germany, 2014,… more
2013
A. Paar, R. Schneider, P. Zeller, G. Reiter, S. Paul, P. Würzinger, I. Stiller - Influence of the Polarity on the Cleanliness Level and the Inclusion Types in the ESR Process - Proceedings of the 2013 International Symposium on Liquid Metal Processing & Casting, Austin, Texas, United States of America,… more
2012
A. Paar, R. Schneider, G. Reiter, P. Zeller, P. Würzinger, M. Wöls, S. Paul - Influence of selected electrical parameters on the ESR Process. - Proceedings of the 19th International Student's Day of Metallurgy, Freiberg, Germany, 2012 more
2011
S. Hofer, M. Hartl, G. Schestak, R. Schneider, L. Samek, E. Arenholz - Comparison of Austenitic High-Mn-Steels with Different Mn- and C-Contents Regarding their Processing Properties - 18. Internatinal Student´s Day of Metallurgy, Leoben, Austria, 2011, pp. 21-30 more
2011
S. Hofer, M. Hartl, G. Schestak, R. Schneider, E. Arenholz, L. Samek - Comparison of Austenitic High-Mn-Steels with Different Mn- and C-Contents Regarding their Processing Properties - Journal of Mining, Metallurgical, Materials, Geotechnical, and Plant Engineering, Vol. 156, No. 3, 2011, pp. 99-104 more
2011
R. Schneider, A. Paar, P. Zeller, G. Reiter, W. Schützenhöfer, P. Würzinger - Installation and Startup of an Experimental ESR Plant - Journal of Mining, Metallurgical, Materials, Geotechnical, and Plant Engineering, Vol. 156, No. 3, 2011 more
2010
J. Crespo-Casanova, H. Degischer, C. Ladron, E. Maire, K. Track, B. Harrer - Rissfortschritt in Sphärogussproben durch in-situ Zugversuche im Synchrotron-Strahl - Tagung Werkstoffprüfung 2010, Neu-Ulm, Germany, 2010 more
2010
R. Schneider, C. Schüller - Surface Hardening of Cold-Work Steels- an Energy Saving and Low Distortion Heat Treatment Alternative - Proceedings of the International Conference on Reduction Of Energy Consumption In Heat And Thermochemical Treatment Technologies And Installations, Poiana Brasov, Romania,… more
2009
R. Schneider, R. Grunwald, M. Gillich, D. Vaught - Induction hardening and tempering of cold work tool steels - Proceedings of the 8th International Tooling Conference, Aachen, Germany, 2009, pp. 573-583 more
2009
R. Schneider, R. Grunwald, C. Schüller - Microstructural Changes During Short-Cycle Heat Tratments of Cold-Work Tool Steels - New challenges in Heat Treatment and Surface Hardening, Dubrovnik, Croatia, 2009 more
2009
R. Schneider - Dertermination of Hardness-Impact Toughness Relationship for Short-Cycle Heat Treated Steels - 17. Conference on Materials and Technology, Portoroz, Slovenia, 2009 more
2008
R. Grunwald, R. Schneider - Measurement of the depth of nitriding - inaccuracy and range of scatter of the measurement method - Record of the 74th meeting of the ASMET heat treatment section, Wels, Austria, 2008, pp. 15 more
2008
R. Schneider, J. Perko, G. Reithofer - Heat treatment of corrosion resistant tool steels for plastic moulding - Materials and Technology, Vol. 42, No. 5, 2008, pp. 29-31 more
2008
R. Schneider, R. Grunwald - Investigation of the induction hardening behaviour of a high-alloy cold-work tool steel - Materials Colloquium Wels 2008, Wels, Austria, 2008, pp. 33-38 more
2008
P. Presoly, J. Korp, R. Schneider - Electrical Conductivity and Corresponding Specific Energy Consumption of MgO-containing ESR-Slags - 9th European Electric Steelmaking Conference, Krakow, Poland, 2008, pp. 10 more
2008
J. Korp, R. Schneider, P. Presoly, W. Krieger - Experimental Determination ot the Specific Electrical Conductivity of High CaF2 Containing Slags - Laboratory and Industrial Results - Journal of Mining, Metallurgical, Materials, Geotechnical, and Plant Engineering, Vol. 153, No. 5, 2008, pp. 175-181 more
2008
G. Reithofer, R. Schneider - Heat treatment of hot work tool steels - Size matters! - Materials and Technology, Vol. 42, No. 5, 2008, pp. 32-33 more
2008
G. Schestak, M. Hartl, R. Schneider, E. Arenholz - Investigation of the deformation an recrystallisation behaviour of high-strenght steels for the automotive industry - Materials Colloquium Wels 2008, Wels, Austria, 2008, pp. 39-44 more
2007
R. Schneider - Neue Stähle für den Formenbau und daraus resultierende Anforderungen an die Wärmebehandlung - Manufacture of Tools and Dies in Central Europe, Kirchdorf, Austria, 2007, pp. 1-21 more
2007
J. Korp, R. Schneider, R. Hasenhündl, P. Presoly - Electrical conductivity of new MgO contentaining ESR slags and its effect om energy consumption - Electrical conductivity of new MgO containing ESR slags and its effect on energy consumption, Rosario , Argentina, 2007, pp. 333-342 more
2007
R. Schneider, R. Grunwald - Simulation of the Induction Hardening of a High Alloyed Tool Steel with a Quench Dilatometer Compared with Real Induction Conditions - Proceedings of the 5th IFHTSE - Int. Conf. on Quenching and Control of Distortion, Berlin, Germany, 2007, pp. 225-232 more
2007
R. Schneider, M. Gillich, M. List, D. Heim - Short- time hardening and tempering behaviour of a low alloy steel - Proceedings of the 16th Congress of the Int. Fed. for heat treatment and surface engineering, Brisbane, Australia, 2007, pp. 92-93 more
2007
R. Schneider, H. Schweiger, G. Reiter, V. Strobl - Effects of different alloying concepts of new hot work tool steels on the hardness profile after nitriding - Surface Engineering, Vol. 23, No. 3, 2007, pp. 173-176 more