Faculty

School of Engineering, Wels

2007
A. Auinger, J. D. Hallewell Haslwanter, C. Stary, F. Auinger, C. Derndorfer - ELIE: Content Production for E-Learning in Engineering - Proceedings of the International Conference on Interactive Mobile… more
2007
A. Auinger, C. Stary, J. D. Hallewell Haslwanter, F. Auinger, C. Derndorfer - Content Production for E-Learning in Engineering - International Journal of Emerging Technologies in Learning, Vol. 2, No.… more
2006
R. Froschauer, F. Auinger, T. Strasser, G. Grabmair - Automatic control application recovery in distributed IEC 61499 based automation and control systems - Proceedings of the IEEE Workshop on Distributed… more
2007
H. C. Leindecker - Solarcar and Photovoltaik-Equipment FH OÖ Campus Wels - Solarcar and Photovoltaic-Equipment FH OÖ Campus Wels, Eugendorf / Salzburg, Austria, 2007, pp. 36 more
2007
H. C. Leindecker - Energy-Efficient and Healthy Buildings - A Contradiction? - Technical Report, FH OÖ Fakultät Wels, Austria, 2007, pp. 2 more
2007
H. C. Leindecker, D. Neyer - Thermal Comfort - Combination of Building Simulation & CFD - Research-Meeting Universities of Supplied Sciences Austria 2007, Campus Urstein, Austria, 2007, pp. 269-274 more
2006
H. C. Leindecker - Building Physics and Biology - Basics for an Energy-Efficient Building with Thermal Comfort - Schönauer Expertentage, Großschönau, Austria, 2006, pp. 93-111 more
2007
J. Kastner, E. Schlotthauer, E. Breuer, D. Stifter - Optical Coherence Tomography and 3D X-ray Computed Tomography - MP Materials Testing, Vol. 49, No. 4, 2007, pp. 177-183 more
2007
J. Kastner, D. Salaberger, M. Grabner, M. Mehofer - Micro-X-Ray Computed Tomography: A non-destructive method for archaeology - Archaeology Austria, Vol. 18, No. 1, 2007, pp. 60-64 more
2007
J. Kastner, D. Angermaier, E. Schlotthauer, G. Zitzenbacher, W. Stadlbauer - µ- and nano-computed tomography for the 3-dimensional characterisation of composites - Proceedings of the Industrial Symposium… more
2007
J. Kastner, D. Salaberger, C. Heinzl - Measurement of microparts and reproducible surface extraction - PTB-Report Geometrymeasurement by industrial CT, Braunschweig, Germany, 2007, pp. 181-192 more
2007
J. Kastner, D. Angermaier, G. Zitzenbacher, E. Schlotthauer, W. Stadlbauer - Quantitative Measurement of fibre length and distribution in fibre reinforced polymers - DGZFP Yearly Conference 2007, Fürth,… more
2007
C. Heinzl, J. Kastner, E. Gröller - Surface Extraction from Multi-Material Components for Metrology using Dual Energy CT - IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS, Vol. 13, No. 6, 2007,… more
2007
C. Heinzl, J. Kastner, B. Georgi, H. Lettenbauer - Comparison of surface detection methods to evaluate cone-beam computed tomography data for three dimensional metrology - Proceedings of International… more
2006
C. Heinzl, R. Klingesberger, E. Gröller, J. Kastner - Robust surface detection for variance comparison - Proceedings of Eurographics/IEEE VGTC Symposium on Visualisation, Lissabon, Portugal, 2006, pp.… more
2006
C. Heinzl, J. Kastner, E. Gröller - Reproducible Surface Extraction for Variance Comparison in 3D Computed Tomography - Proceedings of European Conference on Non-Destructive Testing 2006, Berlin, Germany,… more
2006
B. Tomic, B. Harrer, A. Kottar, H. Degischer, L. Zeipper, J. Kastner - Characterisation of graphite particles in GJS - progress in metallography, Leoben, Austria, 2006, pp. 113-120 more
2007
B. Harrer, J. Kastner, A. Kottar, H. Degischer - Detection of inhomogenieties in cast material using x-ray computer tomography - DGZFP Yearly Conference 2007, Fürth, Germany, 2007, pp. 10 more
2007
B. Harrer, W. Winkler, E. Pissenberger, J. Kastner, H. Degischer - X-ray computer tomography of inhomogenities in aluminium and steel - progress in metallography, Bremen, Germany, 2007, pp. 131-136 more
2007
S. Griesser, G. Buchinger, T. Raab, D. P. Claassen, D. Meissner - Charcterization of Fuel Cells and Fuel Cell Systems Using Three-Dimensional X-Ray Tomography - Journal of Fuel Cell Science and Technology,… more
2003
G. Zauner, D. Heim, G. Hendorfer, K. Niel - Temperature mapping in heat treatment processes with a standard color-video camera by means of image processing - SPIE Machine Vision Applications in Industrial… more
2007
M. Mantler, B. Chyba, M. Reiter - Monte-Carlo simulation of projections in computed tomography - Denver X-Ray Conference 2007, Denver, United States of America, 2007, pp. 6 more
2006
G. Zauner, M. Reiter, J. Kastner - Denoising of Computed Tomography Images using Multiresolution Based Methods - Proceedings of European Conference on Non-Destructive Testing 2006, Berlin, Germany, 2006,… more
2007
G. Zitzenbacher, R. Karlbauer, H. Thiel - A New Calculation Model and Optimization Method for Maddock Mixers in Single Screw Plasticising Technology - International Polymer Processing, Vol. 22, No. 1,… more
2007
G. Zitzenbacher - A New Stress Calculation Model for the Prediction of Solid Bed Breakup in Single Screw Extruders. - Proceedings of the Europe/Africa Meeting 2007 of the Polymer Processing Society, Gothenburg,… more
2007
D. Hofinger, M. Jungwirth - Applied Simulation for Active Inverter Technology - Proceedings FH Science Day 2007, Wels, Austria, 2007, pp. 51-58 more
2007
M. Jungwirth - Magnetic Field Sensor Using a Physical Model to Pre-Calculate the Magnetic Field - Proceedings EUROSIME 2007, London, United Kingdom of Great Britain and Northern Ireland, 2007, pp. 6 more
2007
M. Jungwirth, D. Hofinger - Multiphysics Modelling of High-Frequency Inductive Devices - Proceedings COMSOL Conference 2007, Grenoble, France, 2007, pp. 229-234 more
2007
G. Buchinger, J. Kraut, T. Raab, S. Griesser, V. Lawlor, J. Haiber, R. Hiesgen, W. Sitte, D. Meissner - Operating micro-tubular SOFCs containing nickel based anodes with blends of methane and hydrogen… more
2007
G. Buchinger, P. Hinterreiter, T. Raab, S. Griesser, V. Lawlor, K. Klein, S. Kuehn, W. Sitte, D. Meissner - Stability of micro tubular SOFCs operated with synthetic wood gases and wood gas components -… more
2007
G. Buchinger, T. Raab, S. Griesser, V. Lawlor, S. Potzmann, S. Kuehn, K. Klein, W. Sitte, D. Meissner - Improving the Power Densities and Lifetime of Micro-Tubular SOFCs - Proceedings ot the 2nd European… more
2007
V. Lawlor, G. Buchinger, C. Hochenauer, P. Dawson, T. Raab, S. Griesser, A. Olabi, B. Corcoran, D. Meissner - Design of a Micro-Tubular SOFC Rector with CFD and Validations - Proceedings ot the 2nd European… more
2000
M. Rabl - Time domain evaluation of resonance antireflection (RAR) signals for ultrasonic density measurement - IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, Vol. 47, No. 6, 2000,… more
2000
M. Rabl - Ultrasonic characterization of liquids using resonance antireflection - Ultrasonics , Vol. 38, No. 1, 2000, pp. 200-205 more
2001
M. Rabl - Dichtemessverfahren für Flüssigkeiten nach dem akustischen Entspiegelungsprinzip - VDI Verlag, 2001 more
2007
C. Danninger, P. Zeller, M. Rabl - Observation of current distribution in arc chutes with a Hall probe matrix - Proceedings of the IEEE Sensors 2004, Vienna, Austria, 24/10/2004-27/10/2004, Golden, CO,… more
2007
B. Sieberer, W. Hinterberger, P. Fischer, W. Steiner - A COMBINED PERTURBATION – AND MATRIX DIVISION TECHNIQUE FOR LOCALLY DAMPED SYSTEMS - Vibration Damping, Wiesloch, Germany, 2007, pp. 147-178 more
2007
J. D. Hallewell Haslwanter, C. Derndorfer, F. Auinger - Didactic considerations for preparing technical contents - Proceedings of ifm2007 (International Forum for Mechatronics), Winterthur, Switzerland,… more
2007
C. Derndorfer, J. D. Hallewell Haslwanter, J. Schulze - Risks and opportunities with automated exercise correction - Proceedings of ifm2007 (International Forum for Mechatronics), Winterthur, Switzerland,… more
2006
J. Schulze, J. D. Hallewell Haslwanter, C. Derndorfer, M. Längrich, A. Meyer - NET-Programming-Curriculum Inside-Out – It’s working now! - Proceedings of the International Conference Interactive Computer… more
2006
J. Weichbold, K. Schiefermayr - The optimal control of a general tandem queue - PROBABILITY IN THE ENGINEERING AND INFORMATIONAL SCIENCES, Vol. 20, No. 2, 2006, pp. 307-327 more
2005
K. Schiefermayr, J. Weichbold - A complete solution for the optimal stochastic scheduling of a two-stage tandem queue with two flexible servers - JOURNAL OF APPLIED PROBABILITY, Vol. 42, No. 3, 2005, pp.… more
2007
G. Buchinger, S. Potzmann, T. Raab, S. Griesser, V. Lawlor, S. Kuehn, K. Klein, D. Meissner - Entwicklung von mikrotubulären SOFCs - Tagungsband des ersten Forschungsforum der österreichischen Fachhochschulen,… more
2007
S. Martini, M. Kleinhappl, C. Roschitz, H. Hofbauer, D. Meissner, G. Buchinger - Coupling of Biomass Gasification and Solid Oxide Fuel Cell (SOFC) - Technology - Proceedings ot the 15th European Biomass… more
2007
D. Salaberger, J. Kastner - Non- destructive testing using 3D- x-ray Computed Tomography - Tagungsband des ersten Forschungsforum der österreichischen Fachhochschulen, Fachhochschule Salzburg, Campus… more
2007
M. Steinbatz - EHD-Contact in Multi Body Simulation Software for Dynamic and Fatigue Analysis of Engine Components - Proceedings FH Science Day 2007, Wels, Austria, 2007, pp. 33-37 more
2007
C. Rittenschober, K. Niel, R. Rössler - Appliance of stereoscopy for bath level detection of steel casting pans - Proceedings Machine Vision Applications in Industrial Application XV, San Jose, CA, USA,… more
2007
W. Girkinger, K. Gaubinger - Performance-Steigerung des Innovationsprozesses, Toolbox für das Innovationscontrolling - Wissenschaftsmanagement, Vol. 2007, No. 3, 2007, pp. 26-28 more
2006
W. Girkinger, V. Purtscher - Besonderheiten der Unternehmensbewertung bei technologieorientierten Untenehmensgründungen - ControllerNews, Vol. 2006, No. 4, 2006, pp. 22-27 more
2006
W. Girkinger, K. Gaubinger - Innovationscontrolling, Toolbox zur Steigerung des Unternehmenserfolges - INSIGHT, Vol. 2006, No. 1, 2006, pp. 40-41 more
2007
M. Egger - Simulation of Flat Belt Running - steel research, Vol. 78, No. 4, 2007, pp. 364-368 more
2007
H. C. Leindecker, J. Putzhammer - Integration of Photovoltaic in Facades - Technical Report, FH OÖ Fakultät Wels, Austria, 2007, pp. 148 more
2007
K. Gaubinger - Innovation Planning in SME in Planning in SME (Editors: J. Meyer et al.), 2007, pp. 393-402 more
2007
C. Schiller-Ripota - Social copetence in the fh education in Social competence (Editors: M. Jabornegg), 2007, pp. 265-273 more
2005
G. Zauner, C. Ramsauer, G. Hendorfer - Wavelet coherence analysis applied to laser vibrometry measurements - SPIE Optics East - Wavelets Applications in Industrial Processing V (vol. 6763), Boston, United… more
2005
G. Zauner, B. Harrer, D. Angermaier, J. Kastner - Multiscale segmentation method for small inclusion detection in 3D industrial computed tomography - Optical Measurement Systems for Industrial Inspection… more
1998
P. Blaimschein - Modelling and control of non-holonomic mobile robot-systems - ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK, Vol. 78, No. 1, 1998, pp. 279-280 more
1999
P. Blaimschein - Modeling and control of mobile robots with redundant drive configuration - ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK, Vol. 79, No. 2, 1999, pp. 1-2 more
2000
K. Kellermayr - Technische Informatik - Springer Vieweg, 2000, pp. 1-384 more
2007
W. Hauer, P. Zeller, X. Zhou - Benchmark Tests of Single-Break and Double-Break Design Principles - Proceeding of the 53rd IEEE Holm conference on electrical contacts, Pittsburgh, PA, United States of… more
2006
K. Kellermayr - Informationssystem Photovoltaik Experimentier Anlage am FH Campus Wels - Report, FH OÖ Fakultät Wels, Austria, 2006, pp. 26 more
2007
F. Mayrhofer, G. Zauner, G. Hendorfer, G. Darilion - Messsystem zur Prozesskontrolle bei Wärmebehandlungsprozessen auf Basis einer CCD-Kamera - Tagungsband des ersten Forschungsforum der österreichischen… more
2007
G. Grabmair, A. Zoitl, T. Strasser, R. Froschauer - Modelling Real-time Constraints Regarding Reconfiguration Aspects for IEC 61499 Control Applications - INDIN 2007 Conference Proceedings Vol. 2, Wien,… more
2007
G. Mayr, G. Hendorfer, G. Zauner - Zerstörungsfreie Werkstoffprüfung auf Basis der Aktiven Thermographie - Tagungsband des ersten Forschungsforum der österreichischen Fachhochschulen, Fachhochschule… more
2007
G. Mayr, G. Hendorfer, G. Zauner, F. Puchberger - A fast and robust method for determining thermal diffusivity images in complex geometries - Proceedings of the 4th International Conference of Emerging… more
2006
G. Mayr, G. Zauner, G. Hendorfer - Nondestructive testing of CFRP aerospace components - Proceedings of Aeronautics Days 2006, Wien, Austria, 2006, pp. 8 more
2006
G. Mayr, G. Zauner, G. Hendorfer, M. Haslhofer, R. Pree - Active thermography and shearography - Proceedings of optical sensors in the production field, Regensburg, Germany, 2006, pp. 117-123 more
2007
I. Hegny, R. Holzer, G. Grabmair, A. Zoitl, F. Auinger, E. Wahlmüller - A Distrubted Energy Management Approach for Autonomous Power Supply Systems - INDIN 2007 Conference Proceedings Vol. 2, Wien, Austria,… more
2007
A. Zoitl, G. Grabmair, R. Smodic, T. Strasser - An Execution Environment for Real-Time Constrained Control Software based on IEC 61499 - INDIN 2007 Conference Proceedings Vol. 2, Wien, Austria, 2007, pp.… more
2006
J. Kastner, D. Heim, D. Salaberger - Advanced applications of computed tomography by combination of different methods - Proceedings of European Conference on Non-Destructive Testing 2006, Berlin, Germany,… more
2008
F. Mayrhofer, G. Zauner, G. Hendorfer, G. Darilion, T. Müller - Messsystem zur ortsaufgelösten optischen Charakterisierung dünner Schichten - Proceedings of FFH2008, Wels, Austria, 2008, pp. 9999 more
2006
F. Mayrhofer, K. Niel - Optical Crack Detection of Refractory Bricks - Proceedings of European Conference on Non-Destructive Testing 2006, Berlin, Germany, 2006, pp. 7 more
2007
W. Girkinger, K. Gaubinger - Innovationscontrolling, Toolbox für international tätige KMU - FOCUS CONSULTING, Vol. 2007, No. 2, 2007, pp. 10-13 more
2007
W. Girkinger, K. Gaubinger - Innovationsprozess in kleinen und mittleren Unternehmen - Research-Meeting Universities of Supplied Sciences Austria 2007, Campus Urstein, Austria, 2007, pp. 1 more
2005
G. Zauner, G. Darilion, D. Heim, G. Hendorfer, T. Müller - CCD based emissivity measurements for surface characterization in - Optical Measurement Systems for Industrial Inspection , Munich, Germany,… more
2005
G. Zauner, G. Darilion, G. Hendorfer, D. Heim - Multispectral thermal imaging with CCD camera system - 2nd International Spectral Imaging Workshop, Villach, Austria, 2005, pp. 8 more
2005
G. Zauner, G. Hendorfer - Multiresolution denoising of CCD thermal images for improved spatial temperature resolution - Wavelets in Industrial Applications, Boston, United States of America, 2005, pp.… more
2005
G. Zauner, G. Darilion, R. Pree, D. Heim, G. Hendorfer - Online inspection of thermo-chemical heat treatment processes with CCD camera system - Two- and Three-Dimensional Methods for Inspection and Metrology… more
2005
G. Zauner, G. Darilion, D. Heim, G. Hendorfer - CCD Kamera als innovatives Wärmebildsystem - Proceedings of FH Science Day 2005, Steyr, Austria, 2005, pp. 168-173 more
2004
G. Zauner, D. Heim, H. Störi, G. Hendorfer, K. Niel - Image processing of CCD-based dualband temperature maps - Digital Imaging in Media and Education, Hagenberg, Austria, 2004, pp. 8 more
2004
G. Zauner, D. Heim, G. Hendorfer, H. Störi, K. Niel - Processing of low-intensity CCD images for temperature mapping in industrial processes - Optical Metrology in Production Engineering, Strasbourg,… more
2004
G. Zauner, D. Heim, G. Hendorfer, H. Störi, K. Niel - CCD Cameras as thermal imaging devices in heat treatment processes - Machine Vision Applications in Industrial Inspection XII , San Jose, United States… more
2006
G. Zauner, G. Mayr, G. Hendorfer - Application of wavelet analysis in active thermography for non-destructive testing of CFRP composites - Wavelet Applications in Industrial Processing IV, Boston, United… more
2006
G. Zauner, G. Hendorfer - CCD-Kamera basiertes Nahinfrarot-Wärmebildsystem zur Prozesskontrolle in der Plasma-Wärmebehandlung - Optosensorik in der industriellen Anwendung, Regensburg, Germany, 2006,… more
2007
S. Reichl - Fatigue Analysis of a Reconstructed Femur. Effects of Prosthetic Materials - Master/Diploma Thesis, FH OÖ Fakultät Wels, Austria, 2007, pp. 145 more
2007
C. Lanzerstorfer, A. Fleischanderl, T. Plattner - Efficient Reduction of PM 10 / PN 2.5 emissions at Iron Ore Sinter Plants - Dustconf 2007, Maastricht, Netherlands, 2007, pp. 1-12 more
2007
G. Hendorfer, G. Mayr, E. Schlotthauer - Pulsed Thermography applied to Components with Complex Shape - American Institute of Physics Conference Proceedings, Vol. 1340, Golden, CO, United States of America,… more
2007
G. Hendorfer, G. Mayr, G. Zauner, T. Nömaier, F. Puchberger - Thermal diffusivity as a probe for material properties and defect characterization - Thermo 2007, Budapest, Hungary, 2007, pp. 10 more
2007
G. Hendorfer - Aktive Thermographie und Shearographie - Neue Methoden zur Porositätsbestimmung, Fehlererkennung und Spannungsanalyse - Proceedings of ifm2007 (International Forum for Mechatronics), Winterthur,… more
2008
G. Hendorfer, G. Mayr, F. Puchberger, B. Harrer - Thermographische Untersuchungen an metallischen Proben in Kombination mit induktiver Erwärmung - Industrielles Symposium Mechatronik 2008, Linz, Austria,… more
2007
R. Schneider, H. Schweiger, G. Reiter, V. Strobl - Effects of different alloying concepts of new hot work tool steels on the hardness profile after nitriding - Surface Engineering, Vol. 23, No. 3, 2007,… more
2007
R. Schneider, R. Grunwald - Simulation of the Induction Hardening of a High Alloyed Tool Steel with a Quench Dilatometer Compared with Real Induction Conditions - Proceedings of the 5th IFHTSE - Int. Conf.… more
2007
R. Schneider - Neue Stähle für den Formenbau und daraus resultierende Anforderungen an die Wärmebehandlung - Manufacture of Tools and Dies in Central Europe, Kirchdorf, Austria, 2007, pp. 1-21 more
2007
R. Schneider, M. Gillich, M. List, D. Heim - Short- time hardening and tempering behaviour of a low alloy steel - Proceedings of the 16th Congress of the Int. Fed. for heat treatment and surface engineering,… more
2006
K. Kellermayr - IO Modules for Computerbased DAQ - Report, FH OÖ Fakultät Wels, Austria, 2006, pp. 1-11 more
2006
K. Kellermayr - Objektorientierte Programmierung - integrierte Anwendungen basierend auf Microsoft Office - Report, FH OÖ Fakultät Wels, Austria, 2006, pp. 1-8 more
2006
K. Kellermayr - Übersicht zu Windows Scripting Host und Windows Management Instrumentierung - Report, FH OÖ Fakultät Wels, Austria, 2006, pp. 1-10 more
2007
K. Kellermayr - Tastkopf und Tastkopfabgleich bei Messgeräten (Oszilloskopen) - Report, FH OÖ Fakultät Steyr, Logistikum, Austria, 2007, pp. 1-8 more
2007
M. Egger - Lateral Running of flat belts: The Angled, Conical Pulley - IFToMM 2007, BESANCON, France, 2007, pp. 4 more
1995
K. Kellermayr - Integrated Computer Systems in Metalurgical Plants - Automation 95, Helsinki, Finland, 1995, pp. 245-256 more
2001
K. Kellermayr - Mobile communication for supervisory control and data acquisition - TCMC2001, Graz, Austria, 2001, pp. 5 more
1994
K. Kellermayr - Wartun, Weiterentwicklung, Sanierung, Re-Engineering, Einbindung von Standardsoftware: Der Weg zu modernen Client Server Lösungen - New Maintenanc Strategies, Wien, Austria, 1994, pp.… more
1986
K. Kellermayr - Local Area Networks in Lokal Area Networks - Springer Vieweg, 1986, pp. 1-256 more
2007
K. Kellermayr - Dokumentation und Analyse von Messdaten mit Digitalspeicher-Oszilloskopen der Serie TDS1000 und TDS200 von Tektronix - Report, FH OÖ Fakultät Wels, Austria, 2007, pp. 25 more
2007
J. Korp, R. Schneider, R. Hasenhündl, P. Presoly - Electrical conductivity of new MgO contentaining ESR slags and its effect om energy consumption - Electrical conductivity of new MgO containing ESR slags… more
1997
T. Eidenberger - Effects of the novel thromboxane (TXA2) receptor antagonist linotroban on inulin and para-aminohippuric acid clearances in the conscious male and female rat. - ARZNEIMITTEL-FORSCHUNG/DRUG… more
1997
T. Eidenberger - Thromboxane A2 does not mediate angiotensin II-dependent nonischemic peripheral vasoconstriction in healthy men: a pilot study. - International Journal of Clinical Pharmacology and Therapeutics,… more
2006
C. Forsich, D. Heim, T. Müller - Silica coatings on steel substrates deposited by bipolar pulsed DC PACVD - Tenth International Conference on Plasma Surface Engineering , Braunschweig, Germany, 2006,… more
2007
C. Forsich, D. Heim - Deposition of SiOCN and Si-C:H Films in an Industrial Pulsed dc PACVD System - 34th International Conference on Metallurgical Coatings and Thin Films 2007, San Diego, United States… more
2008
T. Müller, A. Gebeshuber, D. Heim, C. Forsich - Influence and effects of gas flow on the deposition of SiOCN films in an industrial scale DC glow discharge plasma system - Asian-European International… more
2007
G. Dennler, R. Koeppe, N. S. Sariciftci, D. Meissner - A self-rechargeable and flexible polymer solar battery - SOLAR ENERGY, Vol. 81, No. 8, 2007, pp. 947-957 more
2008
K. Schiefermayr - An upper bound for the logarithmic capacity of two intervals - COMPLEX VARIABLES AND ELLIPTIC EQUATIONS, Vol. 53, No. 1, 2008, pp. 65-75 more
2008
M. Jungwirth - Online Fluid-Monitoring using an electromechanical Cantilever - Proceedings EUROSIME 2008, Freiburg, Germany, 2008, pp. 141-146 more
2008
C. Lanzerstorfer, A. Fleischanderl, T. Plattner, W. Ehler, E. Zwittag - Emission reduction for iron ore sinter plants - VDI Bericht 2035, Nürnberg, Germany, 2008, pp. 161-170 more
2008
C. Lanzerstorfer, S. Lacher, C. Hinterstoisser - Biomass ash and heavy metals - Proceedings Central European Biomass Conference 2008, Graz, Austria, 2008, pp. 130 more
2006
A. Fleischanderl, C. Lanzerstorfer, R. Neuhold, G. Meierhofer - MEROS® — Improved Dry-Type Gas-Cleaning Process for the Treatment of Sinter Off-gas - Proceedings IS 06 (Iron&Steelmaking Conference 2006),… more
2008
C. Lanzerstorfer, A. Jäger - Advantages of decentralized Bioethanol Production - 4.European Bioethanol technolgy Meeting Detmold, Detmold, Germany, 2008, pp. 11 more
2008
A. Jäger, C. Lanzerstorfer, A. Eder, S. Fahrnik - Possibilities of a decentralized Bioethanol production - Proceedings Central European Biomass Conference 2008, Graz, Austria, 2008, pp. 141 more
2008
A. Jäger, C. Lanzerstorfer - Biogas - Quo Vadis - Inform, Vol. 1, No. 8, 2008, pp. 12-15 more
2000
M. Jungwirth - Analysis of SAW Interdigital Transducers as Waveguides with N Acoustic Regions - Proceedings 2001 IEEE International Ultrasonics Symposium, San Juan, Puerto Rico, United States of America,… more
2000
M. Jungwirth - Analysis of General Planar Waveguides with N Segments - Proceedings 2001 IEEE International Ultrasonics Symposium, San Juan, Puerto Rico, United States of America, 2000, pp. 137-141 more
2000
M. Jungwirth - Simulation of SAW Filters as Planar Waveguides with N Segments - Austrian Acoustics Association (AAA)-Fachtagung, Graz, Austria, 2000, pp. 12 more
1999
M. Jungwirth - Improved Time Domain Diffraction Analysis for SAW Transducers of Arbitrary Shape - Proceedings IEEE International Ultrasonics Symposium, Lake Tahoe, Nevada, United States of America, 1999,… more
2001
M. Jungwirth - Accurate and Efficient Modeling of SAW Structures - Frequenz (Zeitschrift für Telekommunikation), Vol. 1, No. 55, 2001, pp. 64-72 more
2002
M. Jungwirth - Micromechanical Precision Pressure Sensor Incorporating SAW Delay Line - ACTA MECHANICA, Vol. 158, No. 3, 2002, pp. 227-252 more
2002
M. Jungwirth - Analysis of General Multi-Channel Planar Waveguides - Transactions IEEE on Ultrasonics, Ferroelectrics, and Frequency Control, Vol. 49, No. 4, 2002, pp. 519-527 more
2008
M. Jungwirth, D. Hofinger - Simulationsbasiertes Design von Energieversorgungssystemen - Industrielles Symposium Mechatronik 2008, Linz, Austria, 2008, pp. 258-263 more
2008
D. Stifter, E. Schlotthauer, K. Wiesauer, J. Kastner, M. Wurm - Investigation of polymer and polymer/fibre composite materials with optical coherence tomography - MEASUREMENT SCIENCE & TECHNOLOGY, Vol.… more
2008
D. Salaberger, J. Kastner - X-Ray CT of Saliera in Research Forum (Editors: J. Kastner) - Shaker Verlag, 2008, pp. 341-346 more
2008
K. D. Bouzakis, K. Efstathiou, D. Salaberger, J. Kastner - Design and manufacturing aspects of a vaginal speculum of antiquity as investigated by computed tomographies - JOURNAL OF ARCHAEOLOGICAL SCIENCE,… more
2008
H. Jodlbauer, A. Huber - Service level performance of MRP, KANBAN, CONWIP and DBR due to parameter stability and environmental robustness - INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, Vol. 46, No. 8,… more
2004
W. Steiner - Raumflugmechanik - Springer Vieweg, 2004 more
2006
W. Steiner - Stability Analysis of Relative Equilibria of Mechanical Systems with Cyclic Coordinates - ARCHIVE OF APPLIED MECHANICS, Vol. 2006, No. 75, 2006, pp. 355-363 more
2008
G. Zitzenbacher - Modellierung der Transportvorgänge in Schubschneckenplastifiziereinheiten - Verlag Dr. Müller, 2008 more
2008
T. Auinger, M. Stadlbauer, E. Pachner, W. Stadlbauer, G. Zitzenbacher - Polypropylen-Blasfolien mit langkettenverzweigtem HMS-PP: Verarbeitungsstabilität, mechanische Eigenschaften und Strukturentwicklung.… more
2008
G. Zitzenbacher, W. Stadlbauer, W. Schubert - Herstellung von kreidegefüllten PE-LLD-Regranulat-Blasfolien mittels Compoundverarbeitung, Masterbatcheinmischung und Direktextrusion - Tagungsband 2. Forschungsforum… more
2008
G. Zitzenbacher, W. Stadlbauer, W. Schubert, P. Reven, J. Pühringer - Extrusion of Chalk-filled PE-LLD-Regranulate Blown Films by Applying Different Processing Methods - Proceedings of PPS-24, Salerno,… more
2008
J. F. Pühringer, G. Zitzenbacher - Determination of the relevant material parameters for the radiation heating of semifinished plastic products for thermoforming - Welser Werkstoff-Kolloquium 2008, Wels,… more
2008
S. Reichl, W. Steiner, R. Mootanah - Fatigue Analysis of a Reconstructed Femur. Effects of Prosthetic Materials - Proceeding of the 8th International Symposium on Computer Methods in Biomechanics and Biomedical… more
2008
G. Mayr, G. Hendorfer, F. Puchberger, B. Harrer, B. Dietermayr - Schnelle und zerstörungsfreie Werkstoffprüfung bei Metallen durch Anwendung der Induktionsthermographie - Tagungsband des 2. Forschungsforums… more
2006
G. Hendorfer, G. Mayr, G. Zauner, M. Haslhofer, R. Pree - Quantitative Determination of Porosity by Active Thermography - American Institute of Physics Conference Proceedings, Vol.894, Portland/ Oregon,… more
2008
G. Mayr, B. Dietermayr, G. Hendorfer, J. Sekelja - Characterization of Defects in Curved CFRP Samples using Pulsed Thermography and 3D Finite Element Simulation - Proceedings of 9th International Conference… more
2008
M. Reiter, S. Kunzmann, H. Lettenbauer, B. Chyba, M. Mantler, J. Kastner - Simulation eines industriellen 3D Röntgen Computertomographen zur verbesserten Geometriebestimmung - DACH Conference 2008 DGZFP… more
2008
M. Reiter, S. Kunzmann, H. Lettenbauer, M. Mantler, J. Kastner - SimCT - Modellierung und Simulation eines industriellen Röntgen 3D Computertomographie Systems - Proceedings of FFH2008, Wels, Austria,… more
2008
C. Heinzl, J. Kastner, E. Gröller - Geometriebestimmung von Multimaterialbauteilen und reproduzierbare Oberflächenextraktion - Proceedings Industrielle Computertomografie Fachtagung 2008, Wels, Austria,… more
2006
M. Reiter - Multiskalen Bildverarbeitungsmethoden zur Rauschunterdr¨uckung an industriellen Computer-Tomographie Daten - Master/Diploma Thesis, FH OÖ Fakultät Wels, Austria, 2006, pp. 1-150 more
2008
D. Salaberger, J. Kastner, W. Stadlbauer, G. Zitzenbacher, R. Freytag - Determination of diameter, length and three-dimensional distribution - Proceedings of PPS-24, Salerno, Italy, 2008, pp. 1 more
2008
D. Salaberger, J. Kastner - X-Ray Computed Tomography analysis of Saliera and wooden instruments from Renaissance - Proceedings of FFH2008, Wels, Austria, 2008, pp. 341-346 more
2008
W. Girkinger, K. Gaubinger - Target Costing, in :Praxisorientiertes Innovations- und Produktmanagement - Georg Thieme Verlag KG Stuttgart, 2008, pp. 143-154 more
2008
R. Froschauer, D. Dhungana, P. Grünbacher - Managing the Life-cycle of Industrial Automation Systems with Product Line Variability Models - Proceedings of the 34th EUROMICRO Conference on Software Engineering… more
2008
R. Froschauer, D. Dhungana, P. Grünbacher - Runtime Adaptation of IEC 61499 Applications Using Domain-specific Variability Models - Proceedings of the 2nd International Workshop on Dynamic Software Product… more
2008
R. Froschauer - Evaluation of FlexRay for Interconnection of Industrial Automation Systems - Industrielles Symposium Mechatronik 2008, Linz, Austria, 2008, pp. 5 more
2008
H. C. Leindecker - Energy Efficiency and Thermal Comfort in Buildings - Building Technology - Energyefficiency or/and Thermal Comfort, Wels, Austria, 2008, pp. 8-53 more
2000
K. Gaubinger - Marketing-Controlling for SME in Marketing-Controlling for SME - Georg Thieme Verlag KG Stuttgart, 2000, pp. 320 more
2006
K. Gaubinger - Analyzing Marketing Opportunities in Business-to-Business-Marketing (Editors: T. Werani, K. Gaubinger, H. Kindermann) - Georg Thieme Verlag KG Stuttgart, 2006, pp. 57-70 more
2006
K. Gaubinger - Case: Abatec Electronic AG in Business-to-Business-Marketing (Editors: T. Werani, K. Gaubinger, H. Kindermann) - Georg Thieme Verlag KG Stuttgart, 2006, pp. 85-98 more
2006
D. Eyett, K. Gaubinger - Case: Format in Business-to-Business-Marketing (Editors: T. Werani, K. Gaubinger, H. Kindermann) - Georg Thieme Verlag KG Stuttgart, 2006, pp. 99-110 more
2006
R. Daubeck, K. Gaubinger - Case: Tyrolit in Business-to-Business-Marketing (Editors: T. Werani, K. Gaubinger, H. Kindermann) - Georg Thieme Verlag KG Stuttgart, 2006, pp. 211-222 more
2006
K. Gaubinger - Case: Fill in Business-to-Business-Marketing (Editors: T. Werani, K. Gaubinger, H. Kindermann) - Georg Thieme Verlag KG Stuttgart, 2006, pp. 223-235 more
2006
R. Daubeck, K. Gaubinger - Case: Frequentis in Business-to-Business-Marketing (Editors: T. Werani, K. Gaubinger, H. Kindermann) - Georg Thieme Verlag KG Stuttgart, 2006, pp. 249-262 more
2006
K. Gaubinger - Marketing-Controlling: Basics in Business-to-Business-Marketing (Editors: T. Werani, K. Gaubinger, H. Kindermann) - Georg Thieme Verlag KG Stuttgart, 2006, pp. 279-295 more
2008
K. Gaubinger, M. Rabl - Benchmarking Framework for SME - Proceedings of FFH2008, Wels, Austria, 2008, pp. 108-113 more
2008
K. Gaubinger, M. Kolar - Strategic Designmanagemetn-Toolbox - Proceedings of FFH2008, Wels, Austria, 2008, pp. 132-137 more
2007
K. Gaubinger, W. Girkinger - Innovation in SME - 2nd Research Forum / Austrian Universities of applied Sciences, Campus Urstein, Austria, 2007, pp. 120-128 more
2007
K. Gaubinger, T. Werani - Innovationmanagement in SME in Planning in SME (Editors: J. Meyer) - Springer Vieweg, 2007, pp. 393-402 more
2007
H. C. Leindecker - Hotbox at FH Campus Wels - Report, FH OÖ Fakultät Wels, Austria, 2007, pp. 3 more
2008
H. C. Leindecker - Passivhouse - Basics - FH Science Day 2008, Linz, Linz, Austria, 2008, pp. 59-64 more
2008
H. C. Leindecker, D. Neyer - Intelligent Facade with Glas Fins - e-nova 2008, Pinkafeld, Austria, 2008, pp. 49-57 more
2005
H. C. Leindecker - Blower Door and Building Thermography - IBO-Magazin, Vol. 2005, No. 1, 2005, pp. 14-15 more
2008
F. Mayrhofer, G. Zauner, G. Hendorfer - Optical characterization of thin layers grown on metal components - Photonics Europe - Optical Sensors 7003A, Strasbourg, France, 2008, pp. 12 more
2005
H. C. Leindecker - Eco-Energy - 9. International Passivhouse Conference, Ludwigshafen, Germany, 2005, pp. 663-664 more
2005
H. C. Leindecker - Buildings of Tomorrow at FH Wels - Builidings of Tomorrow, Wels, Austria, 2005, pp. 30 more
2008
H. Traxler, B. Harrer, T. Friedrich, B. Schedler, J. Kastner - Anwendung der Computertomographie auf Komponenten der Kernfusionstechnik - Proceedings Industrielle Computertomografie Fachtagung 2008, Wels,… more
2008
B. Harrer, B. Plank, D. Moore, J. Kastner, H. Degischer - Röntgen-Computertomographie zur Charakterisierung von Heterogenitäten in Eisenwerkstoffen - Proceedings Industrielle Computertomografie Fachtagung… more
2008
H. Traxler, S. Gerzoskovitz, L. Sigl, B. Harrer, J. Kastner - Pulsed Thermography of CFC Monoblock Divertor Components - 25th Symposion on Fusion Technology -SOFT 2008, Rostock, Germany, 2008, pp. 8 more
2008
B. Harrer, C. Gierl, H. Danninger, R. Schneider, J. Kastner - Röntgen-Computertomographie zur Quantifizierung von Porenstrukturen in Sintereisen - Welser Werkstoff-Kolloquium 2008, Wels, Austria, 2008,… more
2008
B. Harrer, J. Kastner, W. Winkler, H. Degischer - Opportunities in the Detection of Inhomogeneities in Steel by Computed Tomography - The 17th World Conference on Non-destructive Testing and Exhibition,… more
2008
F. Pfeifer, J. Kastner, R. Freytag - Method for three-dimensional evaluation and visualization of the distribution of fibres in glass-fibre reinforced injection molded parts by µ-X-ray computed tomography… more
2008
J. Kastner, F. Pfeifer, C. Heinzl, R. Freytag - Pipeline for evaluation of CT-data of glass-fibre reinforced plastics - DACH Conference 2008 DGZFP , St. Gallen, Switzerland, 2008, pp. 8 more
2008
D. Stifter, J. Kastner, E. Schlotthauer, E. Breuer, K. Wiesauer - Optical Coherence Tomography and X-Ray CT for characterisation of polymeric systems - Proceedings Industrielle Computertomografie Fachtagung… more
2008
C. Heinzl, J. Kastner, T. Möller, E. Gröller - Statistical analysis of Multi-Material Components using Dual Energy CT - Proceedings of Vision, Modeling, and Visualization 2008, Konstanz, Germany, Germany,… more
2008
W. Steiner - A finite element based stability test for equilibria of flexible structures in circular orbits - INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, Vol. 43, No. 7, 2008, pp. 650-659 more
2008
R. Schneider - Infrastructure, ressources and cooperation of the Dept. for Materials Technology - Welser Werkstoff-Kolloquium 2008, Wels, Austria, 2008, pp. 4-9 more
2008
R. Schneider, R. Grunwald - Investigation of the induction hardening behaviour of a high-alloy cold-work tool steel - Materials Colloquium Wels 2008, Wels, Austria, 2008, pp. 33-38 more
2008
G. Schestak, M. Hartl, R. Schneider, E. Arenholz - Investigation of the deformation an recrystallisation behaviour of high-strenght steels for the automotive industry - Materials Colloquium Wels 2008,… more
2008
J. Korp, R. Schneider, P. Presoly, W. Krieger - Experimental Determination ot the Specific Electrical Conductivity of High CaF2 Containing Slags - Laboratory and Industrial Results - Journal of Mining,… more
2008
R. Schneider, J. Perko, G. Reithofer - Heat treatment of corrosion resistant tool steels for plastic moulding - Materials and Technology, Vol. 42, No. 5, 2008, pp. 29-31 more
2008
G. Reithofer, R. Schneider - Heat treatment of hot work tool steels - Size matters! - Materials and Technology, Vol. 42, No. 5, 2008, pp. 32-33 more
2008
P. Presoly, J. Korp, R. Schneider - Electrical Conductivity and Corresponding Specific Energy Consumption of MgO-containing ESR-Slags - 9th European Electric Steelmaking Conference, Krakow, Poland, 2008,… more
2008
M. Egger - Running of Flat Belts - Stahleisen GmbH, 2008 more
2008
R. Grunwald, R. Schneider - Measurement of the depth of nitriding - inaccuracy and range of scatter of the measurement method - Record of the 74th meeting of the ASMET heat treatment section, Wels, Austria,… more
2008
C. Kneidinger, G. Zitzenbacher, H. Hager - Friction of Polymer Pellets at Screw Surfaces - Proceedings of Americas Regional Meeting, Polymer Processing Society (PPS), Charleston, United States of America,… more
2009
M. Kröppl, I. Lahoz-Munoz - Trace Elemental Characterization of Fly ash by ICP-OES - XIII Italian-Hungarian Symposium on Spectrochemistry: Environmental Contamination and Food Safety, Las Palmas, Spain,… more
2008
D. Schamall, M. Teschler-Nikola, S. Tangl, D. Salaberger - Articulation despite damaged Articulationes: Syngnathia in Historic Skulls - 17. European Meeting of the Paleopathology Association, Kopenhagen,… more
2008
M. Hochegger, J. Six, H. Degischer, S. Ilie, B. Harrer - Deformation of continuously cast Carbon Steels in the Range of γ-α Transformation - Thermomechanical Processing of Steel, Padua, Italy, 2008,… more
2011
M. Hochegger, B. Harrer, H. Degischer, S. Ilie - Röntgen-Computertomografie der Verformungsporen in Warmzugproben aus Baustahlbrammen - Materialographie Metalle - Keramik -Polymere, Karlsruhe, Germany,… more
2008
G. Hendorfer, C. Reiter, G. Mayr - Size and depth determination of defects in plastic materials, especially in CFRP, by means of shearography - American Institute of Physics Conference Proceedings, Vol.… more
2008
B. Stadlmann - RFID Based Location in Closed Rooms - Implementation of a location algorithm - Proceedings of the 5th International Conference on Informatics in Control, Automation and Robotics - ICINCO… more
2008
B. Stadlmann - Basic Train Control System for Regional Branch Lines - Field Test Report - Computers in Railways XI, Toledo, Spain, 2008, pp. 253-262 more
2008
C. Heinzl, J. Kastner, E. Gröller - High Dynamic Range Imaging for Contrast Enhancement of X-ray Images - Proceedings of IEEE Workshop on X-Ray Micro Imaging of Materials, Devices, and Organisms, Dresden,… more
2008
G. Dvorak, R. Gruber, D. Salaberger, G. Zanoni - Trabecular Bone Structures in - JOURNAL OF DENTAL RESEARCH, Vol. 87, No. 9, 2008, pp. 866-870 more
2008
V. Lawlor, C. Hochenauer, G. Buchinger, S. Griesser, A. Olabi, D. Meissner - Numerical Simulation and Experimental Validation to Design an Optimised Micro-Tubular Solid Oxide Fuel Cell Reactor. - Tagungsband… more
2008
V. Lawlor, C. Hochenauer, G. Buchinger, S. Griesser, A. Olabi, D. Meissner - Towards a micro-tubular SOFC reactor with C.F.D, validation, experiments and a high temperature wind tunnel. - Proceedings of… more
2008
V. Lawlor, G. Buchinger, C. Hochenauer, S. Griesser, A. Olabi, D. Meissner - Development Of A High Temperature Wind Tunnel And Numerical Simulations To Optimise The Layout Of A SOFC Micro-Tube Reactor… more
2008
M. Rabl, K. Gaubinger - Idea production and - evaluation in the front-end of the innovation process in Practice oriented innovation and product management (Contributions to Book: Part/Chapter/Section 3),… more
2008
M. Rabl - Creativity techniques in :Praxisorientiertes Innovations- und Produktmanagement (Contributions to Book: Part/Chapter/Section 3), - Georg Thieme Verlag KG Stuttgart, 2008, pp. 75-90 more
2008
M. Rabl - Quality Function Deployment in :Praxisorientiertes Innovations- und Produktmanagement (Contributions to Book: Part/Chapter/Section 4), - Georg Thieme Verlag KG Stuttgart, 2008, pp. 127-142 more
2008
M. Rabl, K. Gaubinger, M. Gamisch - Case Study Fill Maschinen- und Anlagenbau in :Praxisorientiertes Innovations- und Produktmanagement - Georg Thieme Verlag KG Stuttgart, 2008, pp. 167-176 more
2008
M. Rabl - Realization of development projects and Simultaneous engineering in Praxisorientiertes Innovations- und Produktmanagement (Contributions to Book: Part/Chapter/Section 6), (Editors: K. Gaubinger,… more
2008
M. Rabl, M. Steinbatz - Optimization of the development prozess using virtual and rapid prototyping in Praxisorientiertes Innovations- und Produktmanagement (Contributions to Book: Part/Chapter/Section… more
2008
M. Rabl, K. Gaubinger, S. Hofbauer, H. Heissl - Case study Rosenbauer International AG Feuerlöschsysteme in Praxisorientiertes Innovations- und Produktmanagement (Contributions to Book: Part/Chapter/Section… more
2008
M. Rabl - Organization forms of product management in :Praxisorientiertes Innovations- und Produktmanagement (Contributions to Book: Part/Chapter/Section 9), - Georg Thieme Verlag KG Stuttgart, 2008,… more
2008
C. Lanzerstorfer, A. Jäger - Decentralized integrated biogas and bioethanol production - Sugar Industry, Vol. 133, No. 10, 2008, pp. 642-645 more
2008
C. Lanzerstorfer, A. Jäger, A. Eder - Combined biogas and bioethanol plant - biogas 08, Graz, Austria, 2008, pp. 68-77 more
2009
M. Jungwirth, D. Hofinger - Simulation Based Design of Powersupply Systems - Proceedings of International Conference Computer Aided Systems Theory EUROCAST 2009, Las Palmas, Spain, 2009, pp. 161-163 more
2008
J. Kastner, D. Salaberger - High Resolution X-ray computed tomography for qualitative and quantitative characterisation of fibre reinforced polymers - International Symposium on NDT in Aerospace, Fürth,… more
2008
G. Mahr, C. Hinterhofer, J. Kastner - Finite element modelling of the feline antebrachium - comparison of stress in the intact bones and after extramedullary bridging of a mid-diaphyseal fracture - Vet.… more
2008
A. Jäger, C. Lanzerstorfer, A. Eder - Bioethanol production at Biogas sites - Proceedings FH Science Day 2008, Linz, Austria, 2008, pp. 83-86 more
2008
G. Hendorfer, G. Mayr - Active Thermography for Quantitative Analysis of Defects in Composites - International Symposium on NDT in Aerospace, Fürth, Germany, 2008, pp. 67-76 more
2009
G. Zauner, G. Mayr, G. Hendorfer - Wavelet based subsurface defect characterization in pulsed phase thermography for non-destructive evaluation - Proceedings of SPIE - Wavelet Applications Volume 7248,… more
2009
G. Zauner, G. Mayr, G. Hendorfer - Comparative defect evaluation of aircraft components by active thermography - Proceedings of SPIE Machine Vision Applications Volume 7251, San Jose / USA, United States… more
2009
G. Zauner, B. Harrer - Bildsegmentierung mittels Multiresolution-Bildverarbeitung zur Detektion von Graphiteinschlüssen in 3D-Computertomographie Aufnahmen - Proceedings of the 3rd Symposium of Austrian… more
2008
F. Schweitzer - Analysis of Innovation-driven Small and Medium Enterprises in Upper Austria - Report, Johannes-Kepler-Universität, Austria, 2008, pp. 1-20 more
2008
K. Gaubinger - Contribution to company Success by Innovation in Praxisorientiertes Innovations- und Produktmanagement (Editors: K. Gaubinger, T. Werani, M. Rabl) - Georg Thieme Verlag KG Stuttgart, 2008,… more
2008
K. Gaubinger - Innovation- and Product Management: An Integrated Process Model in Praxisorientiertes Innovations- und Produktmanagement (Editors: K. Gaubinger, T. Werani, M. Rabl) - Georg Thieme Verlag… more
2008
K. Gaubinger - Case study TAB-Asutria: Naming for an innovative Touchscreen-Terminal in Praxisorientiertes Innovations- und Produktmanagement (Editors: K. Gaubinger, T. Werani, M. Rabl) - Georg Thieme… more
2008
K. Gaubinger - Management from Productranges and Services in Praxisorientiertes Innovations- und Produktmanagement (Editors: K. Gaubinger, T. Werani, M. Rabl) - Georg Thieme Verlag KG Stuttgart, 2008,… more
2008
F. Schweitzer, K. Gaubinger - Product- and Market-Testing for Industrial Goods in Praxisorientiertes Innovations- und Produktmanagement (Editors: K. Gaubinger, T. Werani, M. Rabl) - Georg Thieme Verlag… more
2008
F. Schweitzer, G. Liebig, K. Gaubinger - Case study Engel Austria GmbH: Market Entry of a new product generation in Praxisorientiertes Innovations- und Produktmanagement (Editors: K. Gaubinger, T. Werani,… more
2008
M. Kolar, K. Gaubinger - Case study Palfinger AG: Market Testing of High-Performance cranes in Praxisorientiertes Innovations- und Produktmanagement (Editors: K. Gaubinger, T. Werani, M. Rabl) - Georg… more
2008
K. Gaubinger - Marketingmanagement – Product Lifecycle Management in Praxisorientiertes Innovations- und Produktmanagement (Editors: K. Gaubinger, T. Werani, M. Rabl) - Georg Thieme Verlag KG Stuttgart,… more
2008
G. Pichler, G. Binder, K. Gaubinger - Case study Fronius International GmbH: Lifecyclemanagement in Praxisorientiertes Innovations- und Produktmanagement (Editors: K. Gaubinger, T. Werani, M. Rabl) -… more
2008
H. Lippmann, K. Gaubinger - Case study Homag-Group AG: Positioning of the Product in Praxisorientiertes Innovations- und Produktmanagement (Editors: K. Gaubinger, T. Werani, M. Rabl) - Georg Thieme Verlag… more
2008
M. Baldinger, B. Wimmer, K. Gaubinger - Case study Pöttinger Maschinenfabrik GmbH: Organization of Innovation-Managements in Praxisorientiertes Innovations- und Produktmanagement (Editors: K. Gaubinger,… more
2008
K. Zehethofer, K. Gaubinger - Product development "Vitaldrink" - Report, science2business, Austria, 2008, pp. 22 more
2008
F. Auinger, R. Froschauer - Applicability of autonomously generated program code from Matlab/Simulink Models to a complex satellite test environment. - Industrielles Symposium Mechatronik 2008, Linz, Austria,… more
2008
C. Forsich, D. Heim, T. Müller - Influence of the deposition temperature on mechanical and tribological properties of a-C:H:Si coatings on nitrided and postoxidized steel deposited by DC-PACVD - SURFACE… more
2008
B. Darmstädter, D. Salaberger - First results of 3D-CT analysis of wind instruments of the Collection of Historic Musical Instruments Vienna in Technological Studies, 2008, pp. 108-139 more
2009
K. Schiefermayr - Inverse polynomial images consisting of an interval and an arc - COMPUTATIONAL METHODS AND FUNCTION THEORY, Vol. 9, No. 2, 2009, pp. 407-420 more
2008
K. Schiefermayr - A lower bound for the minimum deviation of the Chebyshev polynomial - EAST JOURNAL ON APPROXIMATIONS, Vol. 14, No. 2, 2008, pp. 223-233 more
2009
M. Rabl, M. Jungwirth, P. Zeller - Development of Bending-Type Ultrasonic Transducers with Rotational Symmetry - SENSOR+TEST Kongress 2009, Nürnberg, Germany, 2009, pp. 247-252 more
2004
W. Girkinger, B. Lindorfer - Innovationscontrolling - "Controlling The Uncontrollable"? Teil II - Controller News, Vol. 2004, No. 5, 2004, pp. 150-153 more
2004
W. Girkinger, B. Lindorfer - Innovationscontrolling "Controlling The Uncontrollable"? Teil I - Controller News, Vol. 2004, No. 4, 2004, pp. 127-131 more
2009
V. Lawlor, C. Hochenauer, G. Zauner, S. Griesser, A. Olabi, D. Meissner, G. Buchinger - Towards an optamised Micro-tubular SOFC reactor core design. - Proceedings of the 3rd Symposium of Austrian Universities… more
2009
V. Lawlor, S. Griesser, G. Buchinger, A. Olabi, S. Cordiner, D. Meissner - Review of the micro-tubular solid oxide fuel cell (part I: Stack design issues and research activities) - Journal of Power Sources,… more
2009
G. Zitzenbacher, C. Kneidinger, A. Kögler, H. Hager - Measuring the Frictional Behaviour of Polymer Bulk Solids on Screw Surfaces with a New Developed Test Apparatus - Advances in Polymer Science and… more
2008
B. Plank - Characterization of porosity in sintered metals with 3D X-ray computed tomography to determine optimal production parameters for selective laser melting - Master/Diploma Thesis, FH OÖ Fakultät… more
2009
M. Egger - Tracking of flat belts - CHoPS2009, Brisbane, Australia, 2009, pp. 8 more
2009
A. Jäger, C. Lanzerstorfer, A. Eder - Biothanol made of straw - 3. Research Forum of the Austrian Universities of Applied Science, Villach, Austria, 2009, pp. 282-287 more
2009
C. Kneidinger, G. Zitzenbacher - Determination of the external coefficient of friction for simulating the conveying characteristic of single screw plasticising units - International Forum of Mechatronics… more
2009
S. Reichl, W. Steiner, M. Steinbatz, M. Hofer - Evaluation of Different Methods to Compute Excitation Signals Based on Measured Targets in Agricultural Machines - PAMM Vol. 9, Danzig, Poland, 2009, pp.… more
2009
S. Reichl, W. Steiner, M. Steinbatz, M. Hofer - Practical Approaches for Inverse Calculations of Drive Signals in a Virtual Test Rig with Regard to Agricultural Machines - ECCOMAS: European Community on… more
2009
S. Reichl, W. Steiner, M. Steinbatz, M. Hofer - Praktische Ansätze zur inversen Berechnung von Drivesignalen für Landmaschinen auf dem virtuellen Prüfstand - International Forum of Mechatronics 2009,… more
2009
R. Froschauer, A. Schimmel, F. Auinger, A. Zoitl - Engineering of Communication Links with AADL in IEC 61499 Automation and Control Systems - Proceedings of 7th International IEEE Conference on Industrial… more
2009
R. Froschauer, A. Zoitl, P. Grünbacher - Development and Adaptation of IEC 61499 Automation and Control Systems with Runtime Variability Models - Proceedings of 7th International IEEE Conference on Industrial… more
2009
M. M. Malik, C. Heinzl, E. Gröller - Computation and Visualization of Fabrication Artifacts - Journal of WSCG, Vol. 17, No. 1, 2009, pp. 17-24 more
2009
C. Heinzl, J. Kastner, E. Gröller - Application of Statistical Analysis for Uncertainty Visualization of Computed Tomography Data from Multi Material Components - Denver X-Ray Conference 2009, Denver,… more
2009
C. Heinzl - Analysis and visualization of industrial CT data - Phd Thesis, Technische Universität Wien, Institut für Computergraphik und Algorithmen, Austria, 2009, pp. 110 more
2009
C. Heinzl, J. Kastner, E. Gröller - Computed tomography of multi-material components and evaluation using statistical analysis - Proceedings FFH 2009, Villach, Austria, 2009, pp. 8 more
2009
J. Kastner, C. Heinzl - Genauigkeitsoptimierung der Röntgen-Computertomographie für die Geometriebestimmung und Visualisierung der Messunsicherheit - Proceedings DGZfP annual conference 2009, Münster,… more
2009
M. Zeiner, I. Juranovic-Cindric, M. Kröppl, S. Hann, G. Stingeder - Direct determination of selected trace elements in apple juice by ICP-OES - Direct determination of selected trace elements in apple… more
2009
M. Kröppl, C. Lanzerstorfer, M. Zeiner - Investigation of the mobility of ions in fly ash and bottom ash from wood combustion by extraction experiments - EuroAnalysis 2009, Innsbruck, Austria, 2009 more
2009
M. Zeiner, I. Juranovic-Cindric, M. Kröppl, G. Stingeder - Aluminium content of clarified apple juices - 13. Österreichische Chemietage, Wien, Austria, 2009 more
2009
C. Kneidinger, G. Zitzenbacher, A. Kögler - Coefficient of Friction between Bulk Polymers and Different Metal Surfaces at High Pressures - Proceedings of Europes and Africas Regional Meeting 2009, Polymer… more
2009
F. Schweitzer, H. C. Leindecker, K. Gaubinger - Quality of life in green buildings - WASET Conference Proceedings 2009, Paris, France, 2009, pp. 876-882 more
2009
K. Gaubinger, M. Kolar - Designmanagement Performacne - 3. Research Forum of the Austrian Universities of Applied Science, Villach, Austria, 2009, pp. 551-552 more
2009
M. Jungwirth, M. Rabl - Optimization of Bending-Type Ultrasonic Transducers with Rotational Symmetry using COMSOL Multiphysics - Proceedings COMSOL Conference 2009, Milan, Italy, 2009, pp. 5 more
2009
B. Plank, J. Kastner, R. Schneider, R. Busch - Characterisation of porosities in sinter-metalls by X-ray computed tomography - Example selective laser sintering - Proceedings DGZfP annual conference 2009,… more
2008
C. Forsich, D. Heim, T. Müller - Properties and applications of Si-containing carbon-based coatings - Welser Werkstoff-Kolloquium 2008, Wels, Austria, 2008, pp. 8 more
2008
C. Forsich, D. Heim, T. Müller - Influence of the Deposition Temperature on Mechanical and Tribological Properties of a-C:H:Si Coatings on Nitrided and Postoxidized Steel Deposited by DC-PACVD, Surface… more
2008
D. Heim, C. Forsich, T. Müller - Tribological Behavior of Amorphous Carbon-Silicon-Coatings on Nitrided and Post-Oxidized Steels Deposited by DC-PACVD - 11th International Conference on Plasma Surface… more
2008
C. Forsich, D. Heim, T. Müller - Influence of Pre-Treatment and Roughness on Tribological Properties of a-C:H:Si Coatings Deposited on Nitrided and Postoxidized Steel by Means of DC-PACVD - 12th Joint… more
2008
C. Forsich, D. Heim, D. Müller - PACVD for deposition of Si-containing carbon coatings - Proceedings FH Science Day 2008, Linz, Austria, 2008 more
2009
C. Forsich, D. Heim, T. Müller - Adhesion and Homogeneity of a-C:H:Si Films Deposited in a Modified Plasma Nitriding System for Industrial Application - 6th International Conference on Metallurgical… more
2009
R. Edlinger, A. Poelzleithner - Development of an autonomous Robot for Urban Search and Rescue Operations - Proceedings of the 3rd Symposium of Austrian Universities of Applied Sciences, Fachhochschule… more
2009
R. Edlinger, A. Poelzleithner, W. Rokitansky, M. Zauner, B. Fahringer, J. Hieslmair, T. Fink, T. Hatheier, H. Kneidinger - RoboCup Rescue 2009 - Robot League Team - Technical Report, FH OÖ Fakultät Wels,… more
2009
T. Schrag, W. Gollner, E. Heiduk, H. C. Leindecker, C. Wartha, E. Stocker - Life Cycle Optimization from 3 Aspects: LCC, LCA, TQA - ökosan 09, Weiz, Austria, 2009, pp. 127-130 more
2009
R. Edlinger - Application of a SBRIO to control a Rescue Robot for the RoboCup 2009 - Virtual Instruments in Practice, Fürstenfeldbruck/Germany, Germany, 2009, pp. 7 more
2007
R. Edlinger - Concept and realisation of mobile and autonomous robots - Master/Diploma Thesis, FH OÖ Fakultät Wels, Austria, 2007, pp. 134 more
2009
H. C. Leindecker, F. Heisinger - Building Biology Testing Methods (Database LQG) - Technical Report, FH OÖ F&E GmbH, Austria, 2009, pp. 105 more
2009
H. C. Leindecker, J. Rammerstorfer - Refurbishment of Big Residential Buildings (Database LQG) - Technical Report, FH OÖ F&E GmbH, Austria, 2009, pp. 126 more
2006
G. Buchinger, P. Hinterreiter, T. Raab, S. Griesser, W. Sitte, D. Meissner, R. Claassen, D. Claassen - Opperating Micro–tubular SOFCs with Hydrogen Chloride and Hydrogen Sulfide Containing Fuels and… more
2005
G. Buchinger, P. Hinterreiter, T. Raab, S. Griesser, D. Meissner - Influence of Wood Gas Components on the Powerdensity of Micro-Tubular Solid Oxide Fuel Cells - Proceedings of the 12. Symposium Nutzung… more
2005
T. Raab, S. Griesser, G. Buchinger, K. Koke, D. Meissner - Production of Microtubular SOFC Fuel Cells and Their Use in Stacks With Ultra Short Warm-Up Time - Proceedings of the 1st European Fuel Cell Technology… more
2014
H. Wancura, S. Kuehn, G. Grimschitz, G. de Simone, G. Buchinger, T. Raab - High-Temperature Fuel Cells - Energy Efficiency without Hydrogen Infrastructure - Proceedings of the EnInnov06, Graz, Austria,… more
2005
G. Buchinger, P. Hinterreiter, T. Raab, S. Griesser, D. Meissner - Operating micro-tubular SOFCs with wood-gas components - Proceedings of the 1st European Fuel Cell Technology and Applications Conference… more
2005
S. Griesser, G. Buchinger, T. Raab, D. Meissner - Characterisation of fuel cells and fuel cell systems using 3D x-ray tomography - Proceedings of the 1st European Fuel Cell Technology and Applications… more
2005
S. Griesser, G. Buchinger, T. Raab, R. Hiesgen, D. Meissner - Characterization of Fuel Cells and Fuel Cell Systems with 3 D CT-Scanner - Proceedings DGZfP annual conference 2005, Rostock, Germany, 2005,… more
2009
V. Lawlor, A. Mariani, C. Hochenauer, G. Zauner, S. Griesser, D. Meissner, A. Olabi, S. Cordiner, G. Buchinger - A MICRO TUBULAR SOFC AND STACK TESTING APPERATUS: TO PROVIDE A MEANS OF DEVELOPING HIGHLY… more
2009
V. Lawlor, D. Meissner, C. Hochenauer, S. Griesser, S. Cordiner, A. Mariani, G. Zauner, A. Olabi, G. Buchinger - Micro-tubular SOFCs to Measure the Effects of Cross Flow on Mass Transfer Rates Around the… more
2009
G. Buchinger - Fabrication and Characterization of Micro-Tubular Solid Oxide Fuel Cells - Phd Thesis, Montanuniversität Leoben, Austria, 2009, pp. 1-280 more
2009
V. Lawlor, G. Zauner, A. Mariani, C. Hochenauer, J. Carton, S. Griesser, K. Klein, S. Kuehn, D. Meissner, A. Olabi, S. Cordiner, G. Buchinger - Micro-tubular SOFC: Towards a power pack for automotive and… more
2009
B. Harrer - Detectability of heterogeneities in iron - based and in aluminium alloys by - Phd Thesis, Technische Universität Wien, Inst. f. Werkstoffwissenschaft u. Werkstofftechnologie, Austria, 2009,… more
2008
M. Schöbel, B. Harrer, H. Degischer - Multiscale tomography of diamond reinforced MMC for cooling - Practical metallography, Jena, Germany, 2008, pp. 337-342 more
2009
C. Hochenauer, V. Lawlor, E. Spiegl, B. Linimayr - INVESTIGATION OF THE SUITABILITY OF UNUSED TANKS - Proceedings of SEEP 2009, Dublin, Ireland, 2009 more
2009
C. Möltner, F. Schweitzer, K. Gaubinger - Life Cycle Assesment as a tool for ecological product development - Proceedings FFH 2009, Villach, Austria, 2009, pp. 342-348 more
2009
B. Chyba, M. Mantler, M. Reiter - Monte-Carlo Simulations for Evaluation of different influences on projections of computed tomography - Denver X-Ray Conference 2009, Denver, United States of America,… more
2008
B. Chyba, M. Mantler, M. Reiter - Monte Carlo Simulation of Projections in Computed Tomography - Powder Diffraction, Vol. 23, No. 2, 2008, pp. 150-153 more
2009
V. Lawlor, G. Zauner, A. Mariani, C. Hochenauer, S. Griesser, J. Carton, S. Kuehn, K. Klein, D. Meissner, A. Olabi, S. Cordiner, G. Buchinger - A STUDY TO INVESTIGATE METHODS TO MEASURE THE TEMPERATURE… more
2009
J. F. Pühringer, G. Eder - Can Microtome cuts give additional Information to Viscosity-Crystallinity Curves? - Advances in Polymer Science and Technology 1, Linz, Austria, 2009, pp. 101-102 more
2009
J. Kastner - Research and Development in 15 years University of Applied Sciences in Austria (Editors: H. Holzinger, W. Jungwirth) - Facultas, 2009, pp. 172-190 more
2009
D. Salaberger, B. Darmstädter - Integral Curve versus Separate Bell. New Aspects on the Construction Modes of Crumhorns. - Conference on Interdisciplinary Musicology (CIM09), Paris, France, 2009 more
2009
A. Gleiter, G. Mayr - Interferenz thermischer Wellen - Tagungsband des Thermographie Kolloquiums, Stuttgart, Germany, 2009, pp. 8 more
2009
P. Burgholzer, F. Camacho-Gonzales, D. Sponseiler, G. Mayr, G. Hendorfer - Information changes and time reversal for diffusion-related periodic fields - Progress in biomedical optics and imaging, San Jose,… more
2006
T. J. Heistracher, R. Widmann, B. Stadlmann, J. Zellinger - An Event-based Communication Environment for Multi-Modal Traffic Information Systems - Proceedings of the 9th International IEEE Conference on… more
2009
B. Stadlmann, R. Widmann - An Integrated Train Protection and Information System for Regional Lines - Proceedings of the IEEE 2nd International Symposium on Logistics and Industrial Informatics (Lindi… more
1998
J. F. Pühringer - Surface modification of poly(tetrafluorethylen) by UV-excimer laser light and its characterization - Master/Diploma Thesis, Institut für angewandte Physik, JKU, Linz, Austria, 1998,… more
2009
C. Lanzerstorfer, A. Jäger, A. Eder - Biogas from treated straw - biogas 09, Wels, Austria, 2009, pp. 51-58 more
2008
M. Reiter, D. Weiss, H. Lettenbauer, J. Kastner - Simulation of an industrial X-ray cone beam computed-tomography system - Proceedings of IEEE Workshop on X-Ray Micro Imaging of Materials, Devices, and… more
2014
W. Steiner - Stability Analysis of an Orbiting Plate with Finite Elements - PAMM Vol.8, Erlangen, Germany, 2014, pp. 923-924 more
2009
W. Steiner - A Perturbation Technique for the Computation of Modal Damping in Large FE Structures - International Forum of Mechatronics 2009, Linz, Austria, 2009 more
2008
W. Steiner - Contributions to Stability Problems in Satellite Dynamics - Habilitation Thesis, Technische Universität Wien, Austria, 2008, pp. 103 more
2006
B. Stadlmann - Automation of Operational Train Control on Regional Branch Lines by a Basic Train Control System - Proceedings of the 9th International IEEE Conference on Intelligent Transportation Systems… more
2009
C. Schiller-Ripota - Alumni Club in 15 years University of Applied Sciences in Austria (Editors: H. Holzinger, W. Jungwirth) - Facultas, 2009, pp. 159 more
2012
G. Mayr, G. Hendorfer, B. Plank, J. Sekelja - Porosity determination in CFRP by means of pulsed thermography combined with effective thermal diffusivity models - American Institute of Physics Conference… more
2009
G. Hendorfer - Active Thermography for Quantitative Analysis of Defects in Composites - MP Materials Testing, Vol. 51, No. 6, 2009, pp. 405-411 more
2010
H. C. Leindecker, D. Neyer, F. Vilsecker, S. Schinnerl - Monitoring and Controlling of Photovoltaic Plants - 12. International FM & REM Congress Proceedings, Kufstein, Austria, 2010, pp. 242-247 more
2010
H. C. Leindecker - Refurbishment of a Skyscraper to Passive House - Proceedings FFH 2010, Pinkafeld, Austria, 2010, pp. 503-504 more
2010
E. Heiss, D. Salaberger - Hurt yourself to hurt your enemy: new insights on the function of the bizarre antipredator mechanism in the salamandrid Pleurodeles waltl - JOURNAL OF ZOOLOGY, Vol. 280, No. 2,… more
2009
T. Schrag, H. C. Leindecker, E. Heiduk, W. Gollner, C. Wartha, E. Stocker - Integral Improvement of Buildings - Proceedings of e-nova 2009, Pinkafeld, Austria, 2009, pp. 39-47 more
2004
H. C. Leindecker - Densed Urban Building Structures as Child-Friendly Habitation Environment - ISBN 3-8255-0460-3, published by Centaurus, Herbholzheim, 2004, pp. 208 more
2016
M. Plöderl, R. Silye, G. Zauner, K. Schilcher - Morphological characterization of the human corpus callosum using AFM - Advances in Single-Molecule Research for Biology & Nanoscience , Linz, Austria,… more
2010
M. Kretschmer, K. Gaubinger, F. Schweitzer - Product design for capital goods: quantification of the benefits with the help of the direct benefit to the end customer - Design - Cost and Benefit, Dresden,… more
2010
M. Wenger, R. Froschauer, M. Rooker, G. Ebenhofer, A. Zoitl, T. Strasser - Model-Driven Engineering of Networked Industrial Automation Systems - Proc. of 8th IEEE Conference on Industrial Informatics (INDIN'10),… more
2010
A. Schimmel, A. Schimmel, M. Rooker, A. Zoitl, G. Ebenhofer - Model-Driven Communication Routing in Industrial Automation and Control Systems - Proc. of 8th IEEE Conference on Industrial Informatics (INDIN'10),… more
2010
W. Heider, R. Froschauer, P. Grünbacher, R. Rabiser, D. Dhungana - Simulating Evolution in Model-based Product Line Engineering - INFORMATION AND SOFTWARE TECHNOLOGY, Vol. 52, No. 7, 2010 more
2010
M. Jungwirth, D. Hofinger, H. Weinzierl - A Comparison of Model Order Reduction Methods used in different FE Software Tools - Proceedings EUROSIME 2010, Bordeaux, France, France, 2010, pp. 5 more
2008
H. Fenzl, A. Eder, M. Jungwirth - Multiphysics Simulation of a Cooling System with MATLAB - Industrielles Symposium Mechatronik 2008, Linz, Austria, 2008, pp. 107 more
2010
R. Froschauer, A. Zoitl, M. Rooker - FRONTICS - A Communication Framework for Networked Automation and Control Systems - Proc. of the 10th IFAC Workshop on Intelligent Manufacturing Systems, Lisbon, Spain,… more
2011
K. Schiefermayr - A lower bound for the norm of the minimal residual polynomial - CONSTRUCTIVE APPROXIMATION, Vol. 33, No. 3, 2011, pp. 425-432 more
2010
S. Reichl, W. Steiner, M. Steinbatz - Optimal Control Methods for the Computation of Excitation Signals in Multibody Systems - 1st Joint International Conference on Multibody System Dynamics, Lappeenranta,… more
2010
R. Edlinger, M. Zauner - Mechanical Design and System Architecture of a Tracked Vehicle Robot for Urban Search and Rescue Operations in Lecture Notes in Communications in Computer and Information Science… more
2010
M. Zauner, R. Edlinger - A Modular and Scalable Electronic System for Mobile and Autonomous Robots in Lecture Notes in Communications in Computer and Information Science (CCIS) - Springer Vieweg, 2010,… more
2010
R. Edlinger, M. Zauner - ROBOT EXPLORATION CONTROLLED BY MODULAR ELECTRONIC SYSTEM WITH COMMUNICATION TO THE 2D-MAPPING - Austrian Computer Society, Vol. 36, No. 2010, 2010, pp. 7 more
2010
T. Schrag, H. C. Leindecker, C. Wartha, W. Gollner, E. Heiduk, E. Stocker, S. Schinnerl - Lifecycle Analysis of Buildings - Proceedings FFH 2010, Pinkafeld, Austria, 2010, pp. 263-270 more
2010
C. Hochenauer, G. Zitzenbacher, M. Danner, B. Hunter, P. Orgill - Development of a Plastic Solar Thermal Collector - PMI 2010 conference book, Ghent, Belgium, 2010, pp. 8 more
2010
C. Kneidinger, G. Zitzenbacher, A. Kögler - Determination of the Tribological Characteristics of Plastic Granulates in Plasticizing units for Plastics Processing - Proceedings FFH 2010, Pinkafeld, Austria,… more
2010
M. Reiter, C. Heinzl, D. Salaberger, D. Weiss, J. Kastner - Study on parameter variation of an industrial computed tomography simulation tool concerning dimensional measurement deviations - Proc. of 10th… more
2010
G. Zauner, G. Hendorfer - Bildgebende Methode zur Bestimmung der optischen Konstanten von dünnen Schichten bei hohen Temperaturen durch Analyse der thermischen Strahlungsemission - Proceedings FFH 2010,… more
2010
G. Zauner, G. Hendorfer - Optical characterization of growing thin films at hight temperatures by analysis of near infrared emissivity variations using CCD thermal imaging - Proceedings of QIRT 2010, Quebec,… more
2010
M. Reiter, J. Kastner - Saliera - Das Salzfass von Benvenuto Cellini - Report, FH OÖ Fakultät Wels, Austria, 2010, pp. 81 more
2010
D. Salaberger, K. Arunachalam Kannappan, J. Kastner, J. Reussner, T. Auinger - CT Data Evaluation of Fibre Reinforced Polymers to Determine Fibre Length Distribution - PPS26-2010, Banff, Canada, Canada,… more
2010
S. Müller, D. Salaberger - Analysis of a belt buckle from Mautern on a technical basis - Archaeology Austria, Vol. 21, No. 1, 2010, pp. 60-65 more
2010
J. Kastner, B. Harrer, H. Traxler - COMPUTED TOMOGRAPHY AND PULSED THERMOGRAPHY OF CARBON REINFORCED CARBON/COPPER COMPONENTS FOR THERMONUCLEAR FUSION - Proc. of 10th European Conference on Non-Destructive… more
2010
J. Kastner, D. Salaberger, R. Kickinger - STRUCTURAL ANALYSIS OF POLYMERIC FOAMS BY SUB-µM X-RAY COMPUTED TOMOGRAPHY - Proc. of 10th European Conference on Non-Destructive Testing, Moskau, Russian Federation,… more
2010
C. Heinzl, J. Kastner, E. Gröller - Uncertainty Visualization of Computed Tomography Datasets from Industrial Components - Proc. of 10th European Conference on Non-Destructive Testing, Moskau, Russian… more
2010
B. Harrer, J. Kastner, H. Degischer - MICROFOCUS COMPUTED X-RAY TOMOGRAPHY OF SEGREGATIONS IN HIGH STRENGTH ALUMINIUM ALLOYS - Proc. of 10th European Conference on Non-Destructive Testing, Moskau, Russian… more
2010
J. Kastner, B. Harrer, G. Requena, O. Brunke - Comparative study of micro- and Sub-µm computed tomography with synchrotron tomography applied to Fe- and Al-alloys - NDT & E INTERNATIONAL, Vol. 43, No.… more
2010
C. Heinzl, M. Reiter, J. Kastner, E. Gröller - Artefaktreduktion mittels Dual Viewing für Röntgencomputertomographie von Multimaterialbauteilen - DGZFP Yearly Conference 2010, Erfurt, Germany, 2010 more
2010
S. Rosner, J. Konnerth, B. Plank, D. Salaberger, C. Hansmann - Radial shrinkage and ultrasound acoustic emissions of fresh versus pre-dried Norway spruce sapwood - TREES-STRUCTURE AND FUNCTION, Vol. 24,… more
2010
A. Gleiter, G. Mayr - Thermal wave interference - INFRARED PHYSICS & TECHNOLOGY, Vol. 53, No. 4, 2010, pp. 288-291 more
2010
G. Mayr, G. Hendorfer - Characterization of defects in curved carbon fiber reinforced plastics using pulsed thermography - Quantitative InfraRed Thermography Journal, Vol. 7, No. 1, 2010, pp. 3-16 more
2010
G. Mayr, G. Hendorfer - Porosity Determination by Pulsed Thermography in Reflection Mode - Proceedings of QIRT 2010, Quebec, Canada, 2010, pp. 933-940 more
2009
W. Witteveen, H. Irschik - Efficient Mode-Based Computational Approach for Jointed Structures - AIAA Journal, Vol. 47, No. 1, 2009, pp. 252-263 more
2010
K. Sherif, W. Witteveen, K. Puchner, H. Irschik - Efficient Topology Optimization of Large Dynamic Finite Element Systems Using Fatigue - AIAA Journal, Vol. 48, No. 7, 2010, pp. 1339-1347 more
1994
W. Witteveen - Elastic Multibody Simulation of the Crankdrive with Nonlinear Oilfilm – Structure Interaction - Master/Diploma Thesis, Johannes Kepler Universität Linz, Austria, 1994 more
2010
W. Witteveen - Computation of Distributed Forces in Modally Reduced Mechanical Systems - Proceedings of IMAC XXVIII, Society of Experimental Mechanics Inc., Jacksonville, Florida, United States of America,… more
2009
W. Witteveen, K. Sherif, K. Puchner, H. Irschik - Efficient topology optimization for large and dynamically loaded FE models - Proceedings of IMAC XXVII, Society of Experimental Mechanics Inc., Orlando,… more
2009
W. Witteveen, H. Irschik - Efficient Computation of Joint Interface Modes - Proceedings of IMAC XXVII, Society of Experimental Mechanics Inc., Orlando, Florida, United States of America, 2009 more
2008
W. Witteveen, H. Irschik, A. Plank - An efficient mode based approach for the dynamic analysis of jointed and local damped structures: Joint Interface Modes - Proceedings of ISMA 2008, Leuven, Belgium,… more
2008
W. Witteveen, H. Irschik, B. Unger, H. Holl - An effective strategy for the multibody simulation of jointed FE models - Proceedings of ECSC 2008, St. Petersburg, Russian Federation, 2008 more
2008
W. Witteveen, H. Irschik - An effective strategy for the multibody simulation of jointed FE models in the framework of the floating frame of reference formulation - GAMM 2008, Bremen, Germany, 2008 more
2008
W. Witteveen - Joint Interface Modes: Numerical 3D-Benchmark Studies - Proceedings of IMAC XXVI, Orlando, Florida, United States of America, 2008 more
2007
W. Witteveen, J. Gerstmayr - Reduction Methods for large scale multibody systems - Proceedings of ECCOMAS Thematic Conference, Milano, Italy, 2007 more
2007
W. Witteveen, H. Irschik - Efficient modal formulation for vibration analysis of solid structures with bolted joints - Proceedings of IMAX XXV, Orlande, Florida, United States of America, 2007 more
2009
W. Witteveen, H. Dannbauer, H. Riener - Reduction of Finite Element model for the Multibody Simulation with respect to the contact problem in jointed structures - Proceedings of NAFEMS Seminar "Multidisciplinary… more
2009
H. Riener, M. Fischer, W. Witteveen - Simulation of Engine Dynamics by using MBS/FE Composite Structures - Proceedings of the 12th Europen Automotive Congress, Bratislava, Slovakia, 2009 more
2008
K. Puchner, W. Witteveen, H. Dannbauer - Structural Optimization Regarding Dynamics And Durability - Fisita 2008, München, Germany, 2008 more
2010
M. Zeiner, I. Juranovic-Cindric, M. Kröppl, G. Stingeder - Reference concentrations of major, minor and trace elements in apple juices - Proceedings 5th Central European Congress on Food, Bratislava,… more
2010
M. Kröppl, C. Lanzerstorfer, M. Zeiner - Investigation of the mobility of nutritive and harmful components from wood biomass ashes by extraction experiments - Proceedings Fachhochschulkonferenz 2010,… more
2011
M. Kröppl, T. Pullisaar, C. Lanzerstorfer, M. Zeiner - Determination of the leaching yield of selected elements from wood ashes - Proceedings CEBC 2011, Graz, Austria, 2011, pp. 160 more
2011
W. Witteveen - Area wise application of contact constraints in reduced mechanical systems - Proceedings of IMAC XXIX, Jacksonville, Florida, United States of America, 2011 more
2011
W. Witteveen, K. Sherif - POD based computation of Joint Interface Modes - Proceedings of IMAC XXIX, Jacksonville, Florida, United States of America, 2011 more
2010
W. Witteveen, H. Holl - SIMULATION OF MODALLY REDUCED ROTATING SYSTEMS WITH EQUIVALENT BEARING FORCES - Proceedings of the 8th IFtoMM International Conference on Rotordynamics, Seoul, Republic of Korea,… more
2011
B. Harrer, J. Kastner - X-ray Microtomography: characterisation of structures and defect analysis in Fabrication and Characterization in the Micro-Nano Range - Springer Vieweg, 2011, pp. 119-150 more
1997
M. J. Muller, J. D. Hallewell Haslwanter, T. Dayton - Participatory Practices in the Software Lifecycle in Handbook of Human-Computer Interaction (Editors: M. Helander et al.) - North-Holland / Elsevier… more
2010
K. Gaubinger, W. Girkinger - Lean-Innovation-Toolbox for SME - Proceedings of the 4th Symposium of Austrian Universities of Applied Sciences, Pinkafeld, Austria, 2010, pp. 186-191 more
2010
K. Gaubinger, M. Rabl, F. Schweitzer - Establishing a Productmanagement Benchmarking-Framework - Proceedings of the FFH 2010, Pinkafeld, Austria, 2010, pp. 198-203 more
2010
H. Freudenthaler, K. Gaubinger - Product-Management Implementation Guideline for SME - Proceedings of the FFH 2010, Pinkafeld, Austria, 2010, pp. 487-488 more
2011
K. Sherif, W. Witteveen, H. Irschik, H. Holl, K. Mayerhofer - On the extension of global vibration modes with Ritz-vectors needed for local effects - Proceedings of IMAC XXIX, Jacksonville, Florida, United… more
2010
G. Zauner, G. Mayr, G. Hendorfer - Subsurface Defect Characterization in Pulsed Thermography by Means of Wavelet Analysis - 2nd Int. Symposium on NDT in Aerospace, Hamburg, D, Germany, 2010 more
2010
A. Jäger - From Straw to Biogas - Bauernzeitung , Vol. 61, No. 16, 2010, pp. 63-64 more
2010
C. Lanzerstorfer, A. Jäger, A. Eder - Strategy for use of Straw in biogas plant - Proceedings Fachhochschulkonferenz 2010, Pinkafeld, Austria, 2010, pp. 271-276 more
2010
A. Jäger, H. Kahr, A. Eder, S. Helmberger, C. Lanzerstorfer - Possibilities and Potentials OF Bioethanol Production From Strax - Proceedings 11. Symposium Energieinnovation, Graz, Austria, 2010 more
2010
A. Jäger, S. Helmberger, H. Kahr - OPTIMIZATION OF YEAST FOR ETHANOL PRODUCTION 2nd GENERATION - Proceedings 11. Symposium Energieinnovation, Graz, Austria, 2010 more
2010
J. Lindorfer, H. Steinmüller, A. Jäger, A. Eder - Examination of the hydrolysis of lignocelluloses by means of steam explosion - CHEMIE INGENIEUR TECHNIK, Vol. 82, No. 8, 2010, pp. 1169-1176 more
2010
H. C. Leindecker - Quality Improvement and Wellbeing of the Occupants - Proceedings of e-nova 2010, Pinkafeld, Austria, 2010, pp. 215-220 more
2014
D. Heim, C. Forsich, T. Müller, A. Gebeshuber - Deposition of N, F and O-doped Amorphous Carbon-Silicon Coatings in an Industrial DC-PACVD-System - 14th International Conference on Plasma Surface Engineering,… more
2010
D. Heim, C. Forsich, C. Übleis, A. Gebeshuber, T. Müller - Amorphous carbon-silicon-coatings on nitrided and post-oxidized steels deposited by DC-PACVD - 1st Austrian Symposium on Carbon Based, Leoben,… more
2010
C. Forsich, D. Heim, T. Müller, A. Gebeshuber - Upscaling of an a-C:H:Si Triplex Process in an Industrial DC PACVD System - 37th International Conference on Metallurgical Coatings and Thin Films, San… more
2010
J. D. Hallewell Haslwanter, F. Daschil, C. Derndorfer - Video Aided E-Learning: Maximizing the Benefits - Proceedings of the International Conference on Interactive Computer-Aided Learning (ICL 2010),… more
2010
S. Hutterer, F. Auinger, M. Affenzeller, G. Steinmauerer - Overview: A Simulation Based Metaheuristic Optimization Approach to Optimal Power Dispatch Related to Smart Electric Grids - Life System Modeling… more
2010
M. Breitfuss, H. Dannbauer, W. Witteveen - High efficient consideration of contacting FE structures in multi body simulation - Proceedings SIMVEC 2010, Baden Baden, Germany, Germany, 2010 more
2010
M. Egger, K. Ardreas Clemens - Tracking of flat belt entry looper - Stahl und Eisen, Vol. 130, No. 9, 2010, pp. 77-83 more
2010
M. Egger - Rolling Friction of Low Resistance Tires - SAE 2101, Linz, Austria, 2010 more
2010
J. Kastner, G. Zauner, T. Kern, L. Höfler - Energyefficient Mobility in Energyefficient Mobility - Shaker Verlag, 2010 more
2010
J. Kastner - Industrial Computed Tomography - Industrial Computed Tomography 2010, Wels, Austria, 2010 more
2009
M. Grabner, D. Salaberger - The need of high resolution μ-X-ray CT in dendrochronology and in wood identification - 6th International Symposium on Image and Signal Processing and Analysis, Salzburg, Austria,… more
2010
D. Salaberger, K. Arunachalam Kannappan, J. Kastner - Method for the 3D characterisation of fibres in reinforced polymers - Industrial Computed Tomography 2010, Wels, Austria, 2010, pp. 51-58 more
2011
H. C. Leindecker - Tools for Quality Optimization of Buildings - A New Database - 13. International FM&REM Congress Proceedings, Kufstein, Austria, 2011, pp. 101-106 more
2010
S. Reichl, W. Steiner, M. Steinbatz, M. Hofer - Integration of Leightweight Computation Methods in the Product Development of Agricultural Machines in Energyefficient Mobility - Shaker Verlag, 2010, pp.… more
2010
W. Hauer, P. Zeller - Investigation and evaluation of DC circuit breaker principle in the field of electric mobility. in Energyefficient Mobility - Shaker Verlag, 2010, pp. 62-71 more
2010
S. Hutterer, F. Auinger - Optimal Charging Scheduling of an Electric Car Fleet in Energyefficient Mobility - Shaker Verlag, 2010, pp. 36-44 more
2010
S. Hutterer, M. Affenzeller - Simulation- Based Optimization with Metaheuristics for Optimal Power Distribution in Smart Electric Grids in Energyefficient Mobility - Shaker Verlag, 2010, pp. 75-82 more
2010
M. Reiter, C. Heinzl, D. Salaberger, D. Weiss, J. Kastner - Simulative Parameteroptimierung für Metrologie an Multi-Materialbauteilen mit industrieller Röntgen Computertomografie - Proceedings Industrial… more
2010
C. Hochenauer, G. Gahleitner - Energy Yields of Photovoltaics compared to Small Wind Turbines - Energy Yields of Photovoltaics compared to Small Wind Turbines, Bari, Italy, 2010 more
2010
B. Plank, J. Sekelja, G. Mayr, J. Kastner - Porositydetermination in aeronautic industry with x-ray computed tomography - Proceedings Industrial Computed Tomography Symposium 2010, Wels, Austria, 2010,… more
2010
G. Standfest, S. Kranzer, B. Plank, A. Petutschnigg, M. Dunky - Application of sub-µm CT for the characterization of wood based panels - Proceedings Industrial Computed Tomography Symposium 2010, Wels,… more
2010
B. Plank, D. Salaberger, J. Kastner - High Resolution X-ray CT for Polymer Materials Science - 2nd Int. Symposium on NDT in Aerospace, Hamburg, D, Germany, 2010, pp. 3 more
2010
G. Standfest, D. Salaberger, B. Plank, A. Petutschnigg, M. Dunky - Sub-micron-CT for the characterization of wood based panels - JOURNAL "HOLZTECHNOLOGIE", Vol. 51, No. 4, 2010, pp. 44-49 more
2010
G. Standfest, S. Kranzer, D. Salaberger, B. Plank, A. Petutschnigg, M. Dunky - 3D Microstructure Characterization of Wood Based Panels - Proceedings 1st International Conference on Processing Technologies… more
2010
D. Salaberger, B. Plank, B. Harrer, J. Kastner, O. Brunke, H. Degischer - Comparative study of high resolution cone beam X-ray computed tomography methods and discussion of temperature influence on Nanotom… more
2010
F. Schweitzer, M. Kwong, K. Gaubinger - Effect of Recession on Consumer Attitudes towards Environmentally-Friendly Products - Proceedings of the 2010 Global Marketing Conference at Tokyo, Tokio, Japan,… more
2010
J. D. Hallewell Haslwanter, F. Daschil, C. Derndorfer, T. Koniarek - VALU: Video Aided E-Learning and Understanding - Conference Proceeding International Forum for Mechatronik 2010, Winterthur, Switzerland,… more
2010
M. Wurm, C. Hofer, H. Traxler, A. Zabernig, B. Harrer - Vermessung der Laserbohrungen in faserverstärktem Graphit mittels Optischer Kohärenztomographie - Industrial Computed Tomography 2010, Wels, Austria,… more
2010
J. Crespo-Casanova, H. Degischer, C. Ladron, E. Maire, K. Track, B. Harrer - In-situ Zugversuche an Sphärogussproben im Synchrotron-Strahl - Industrial Computed Tomography 2010, Wels, Austria, 2010 more
2010
J. Crespo-Casanova, H. Degischer, C. Ladron, E. Maire, K. Track, B. Harrer - Rissfortschritt in Sphärogussproben durch in-situ Zugversuche im Synchrotron-Strahl - Tagung Werkstoffprüfung 2010, Neu-Ulm,… more
2011
J. Kastner, B. Harrer, H. Degischer - High resolution cone beam X-ray computed tomography of 3D-microstructures of cast Al-alloys - MATERIALS CHARACTERIZATION, Vol. 62, No. 1, 2011, pp. 99-107 more
2010
J. Kastner, B. Harrer, D. Salaberger - X-Ray Computed Tomography of materials for light-weight applications in Energyefficient Mobility - Shaker Verlag, 2010 more
2010
J. Kastner, B. Plank, D. Salaberger, J. Sekelja - Defect and porosity determination of fibre reinforced polymers by x-ray Computed Tomography - 2nd Int. Symposium on NDT in Aerospace, Hamburg, D, Germany,… more
2010
P. Zeller, M. Rabl - Solar power supply for the rural population in developing countries - Proceedings FFH 2010, Pinkafeld, Austria, 2010, pp. 6 more
2010
R. Schneider, C. Schüller, R. Grunwald - Surface hardening of cold-work tool steels - an energy saving and low distortion heat treatment alternative? - Proceedings of the International Conference on Reduction… more
2010
R. Schneider, R. Mesquita, C. Schüller - Comportamento de aços ferramenta em tratamentos térmicos de ciclos curtos - Proceedings of Encontro da Cadeia de Ferramentas, Moldes e Matrizes - Moldes 2010,… more
2011
J. F. Pühringer, G. Zitzenbacher, C. Spreitzer - Radiation absorption of Polystyrene semi-finished products during the thermoforming process - Proceedings of the fifth Research Forum of the Austrian… more
2010
G. Hendorfer - Thermographische Materialprüfung an Bauteilen aus der Flugzeugindustrie in Energyefficient Mobility - Shaker Verlag, 2010 more
2010
H. Kahr, S. Helmberger, A. Jäger - Bioethanol as fuel in Austria in Energyefficient Mobility - Shaker Verlag, 2010, pp. 15-24 more
2010
A. Jäger, A. Eder, H. Kahr, P. Lanzerstorfer - Biogas Production and Its Use as Local “(Bio-)gas Fuel Station in Energyefficient Mobility - Shaker Verlag, 2010, pp. 25-35 more
2010
M. Jungwirth, W. Baumgartinger, M. Kaltenbacher - Energie sparen durch Simulation in Energyefficient Mobility - Shaker Verlag, 2010, pp. 45-54 more
2011
M. Jungwirth, H. Weinzierl - Efficient Computer Based Optimization of Thermal Management in Electronic Systems - Proceedings of Thirteen International Conference on Computer Aided Systems Theory , Las… more
2011
D. Hofinger, M. Jungwirth - Heatsink design for optimal thermal management - Proceedings EuroSimE 2011, Linz, Austria, 2011, pp. 4 more
2010
V. Lawlor, G. Zauner, C. Hochenauer, A. Mariani, S. Griesser, J. Carton, K. Klein, S. Kuehn, A. Olabi, S. Cordiner, D. Meissner, G. Buchinger - The Use of a High Temperature Wind Tunnel for MT-SOFC Testing---Part… more
2010
V. Lawlor, C. Hochenauer, A. Mariani, S. Griesser, S. Kuehn, K. Klein, A. Olabi, J. Carton, M. Olbrich, S. Cordiner, D. Meissner, G. Buchinger - The Use of CFD to Investigate the Properties of MT-SOFCs… more
2010
M. Kröppl, C. Lanzerstorfer - Biomass ashes - Distribution of plant nutrients in the different ash fractions - EMEC 11, Portoroz, Slovenia, 2010, pp. 141 more
2010
B. Stadlmann, S. Mairhofer, G. Hanis - Field Experience with GPS based Train Control System - Proceedings ENC-GNSS 2010, Braunschweig, Germany, 2010, pp. 7 more
2011
K. Schiefermayr - Estimates for the asymptotic convergence factor of two intervals - JOURNAL OF COMPUTATIONAL AND APPLIED MATHEMATICS, Vol. 236, No. 1, 2011, pp. 28-38 more
2011
J. F. Pühringer, G. Zitzenbacher, C. Spreitzer - Study of heat absorption in the thermoforming process for of transparent and filled polystyrene - PPS-27 (Proceedings), Marrakesh, Marokko, Morocco, 2011,… more
2011
G. Zitzenbacher, K. Liu, C. Kneidinger - Influence of surface roughness on the external coefficient of friction of polymer pellets in single screw plasticizing units. - PPS-27 (Proceedings), Marrakesh,… more
2011
M. Olbrich, G. Zitzenbacher, C. Hochenauer - Study of heat transfer in dispersive mixers at high screw speeds. - PPS-27 (Proceedings), Marrakesh, Marokko, Morocco, 2011, pp. 4 more
2011
C. Hochenauer, B. Hunter, G. Zitzenbacher, M. Danner - Application of polymeric materials for solar thermal collectors - Proceedings of the fifth Research Forum of the Austrian University of Applied Sciences,… more
2011
C. Hochenauer, B. Hunter, M. Danner, G. Zitzenbacher - Thermal modelling of flat plate solar collectors - Proceedings of the fifth Research Forum of the Austrian University of Applied Sciences, Wien (Favoriten),… more
2011
C. Lanzerstorfer - Model based prediction of required cut size diameter for fractionation of fly ash from a grate-fired wood chip incineration plant - FUEL PROCESSING TECHNOLOGY, Vol. 92, No. 5, 2011,… more
2007
G. Windisch, D. Salaberger, W. Rosmarin, J. Kastner - A model for clubfoot based on micro-CT data - JOURNAL OF ANATOMY, Vol. 210, No. 6, 2007, pp. 761-766 more
2011
k. sherif, W. Witteveen, H. Holl, H. Irschik, K. Mayrhofer - Efficient computation of contact problems with local Ritz vectors - Proceedings SIRM 2011, Darmstadt, Germany, 2011 more
2011
J. F. Pühringer, C. Maier, G. Zitzenbacher - Study on the Correlation of the elongation modulus at elevated temperatures and the temperature dependent flexural modulus from DMA measurements of a PP homopolymer… more
2011
G. Zitzenbacher, M. Olbrich, C. Hochenauer - Analytical Calculation Model for the Design of Maddock and Helical Fluted Mixers in Plastics Processing - Proceedings of the fifth Research Forum of the Austrian… more
2011
M. Olbrich, G. Zitzenbacher, C. Hochenauer - Numerical Evaluation of the Operating Conditions of Dispersive Mixers in Single Screw Plasticizing Units - Proceedings of the fifth Research Forum of the Austrian… more
2011
S. Hutterer, F. Auinger, M. Affenzeller - Comparison of Metaheuristic Algorithms for Simulation Based OPF Computation - Proceedings EuroSimE 2011, Linz, Austria, 2011 more
2009
M. Reiter, M. M. Malik, C. Heinzl, D. Salaberger, E. Gröller, H. Lettenbauer, J. Kastner - Improvement of X-Ray image acquisition using a GPU based 3DCT simulation tool - Proccedings of 8th International… more
2011
H. C. Leindecker - Tools for Quality Otpimization of Buildings - Proceedings of 15th International Passivehouse Conference 2011, Innsbruck, Austria, 2011, pp. 605-606 more
2011
H. C. Leindecker - Quality Assurance of Indoor Air Quality - Example Radon - Proceedings of 15th International Passivehouse Conference 2011, Innsbruck, Austria, 2011, pp. 607-608 more
2011
D. Steindl, H. Kahr, S. Helmberger, A. Jäger - Yeast adaption on the substrate straw - Proceedings of the fifth Research Forum of the Austrian University of Applied Sciences, Wien (Favoriten), Austria,… more
2011
F. Schweitzer, O. Gassmann, K. Gaubinger - Is open innovation an effective method to embrace turbulent environments?" - Proceedings of the XXII ISPIM Conference, 12.-15. Juni, Hamburg, Hamburg, Germany,… more
2011
M. Jungwirth, M. Rabl, M. Kaltenbacher, S. Rupitsch - 3D-Analysis of Bending-Type Ultrasonic Transducers for Distance Measurement Applications - Proceedings IEEE International Ultrasonics Symposium 2011,… more
2011
K. Gaubinger, M. Kretschmer, F. Schweitzer - Sustainable Product Design in Investment Goods Markets - Proceedings of the XXII ISPIM Conference, 12.-15. Juni, Hamburg, Hamburg, Germany, 2011 more
2011
K. Gaubinger, R. Zweimüller, F. Schweitzer - Establishing a sustainable oriented technology development framework for medium-sized companies of the supply industry - Proceedings of the XXII ISPIM Conference,… more
2011
M. Rodriguez-Hortala, D. Salaberger, S. Hernandez, J. Kastner, H. Degischer - Characterisation of defects in carbon fibre reinforced polymers (CFRP) - DGM Composite materials, Chemnitz, Germany, 2011,… more
2011
D. Salaberger, K. Arunachalam Kannappan, J. Kastner, J. Reussner, T. Auinger - Evaluation of CT data from Fibre Reinforced Polymers to determine fibre length distribution - INTERNATIONAL POLYMER PROCESSING,… more
2011
E. Heiss, N. Natchev, D. Salaberger - Oropharyngeal morphology in the basal tortoise Manouria emys emys with comments on form and function of the testudinid tongue - JOURNAL OF MORPHOLOGY, Vol. 272, No.… more
2009
M. Zeiner, I. Juranovic-Cindric, M. Kröppl, G. Stingeder - Monitoring of copper in clarified apple juices - EuroAnalysis 2009, Innsbruck, Austria, 2009 more
2010
M. Kröppl, C. Lanzerstorfer, M. Zeiner - Extraction of nutrients from biomass ashes with varying extraction times - Proceedings 1st International Conference on Processing Technologies for the Forest and… more
2011
M. Kröppl, C. Lanzerstorfer, G. Zitzenbacher - Fly ashes from biomass incineration - Analyses of their composition with IC, ICP-OES, SEM-EDX and XRD - Proceedings of the fifth Research Forum of the Austrian… more
2011
M. Kröppl, M. Ceras-Arrese, C. Lanzerstorfer - Extraction of heavy metals from biomass fly ashes under acid conditions - Abstract Book 14. Chemietage, Linz, Austria, 2011, pp. 1 more
2010
M. Zeiner, I. Juranovic-Cindric, M. Kröppl, G. Stingeder - Determination of Copper in Clarified Apple Juices - JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY, Vol. 58, No. 6, 2010, pp. 3617-3620 more
2011
M. Kröppl, I. Lahoz-Munoz, M. Zeiner - Trace elemental characterization of fly ash - Toxicological and Environmental Chemistry, Vol. 93, No. 5, 2011, pp. 886-894 more
2011
M. Kröppl, M. Zeiner, C. Lanzerstorfer - Validation for the Determination of Extractable Metals in Ashes from Biomass Incinerators by ICP-OES - Journal of Chemistry and Chemical Engineering, Vol. 5, No.… more
2011
I. Juranovic-Cindric, M. Zeiner, M. Kröppl, G. Stingeder - Comparison of sample preparation methods for the ICP-AES determination of minor and major elements in clarified apple juices - MICROCHEMICAL… more
2011
C. Derndorfer, G. Xia - A new software tool for the process engineer for the simulation of the solidification process of steel for continuous slab casting machines - Metec InSteelCon 2011, Düsseldorf,… more
2011
S. Reichl - Inverse Dynamics and Trajectory Tracking of Underactuated Multibody Systems - Phd Thesis, Technische Universität Wien, Institut für Mechanik und Mechatronik, Austria, 2011, pp. 219 more
2010
S. Reichl, G. Wimmer, T. Reiter, M. Egger, W. Steiner - Inverse Computations of Causative Vibrations in an AOD Converter - Technical Report, Simulia, Austria, 2010 more
2007
K. Schiefermayr - Inverse polynomial images which consists of two Jordan arcs -- An algebraic solution - JOURNAL OF APPROXIMATION THEORY, Vol. 148, No. 2, 2007, pp. 148-157 more
2007
K. Schiefermayr, J. Weichbold - A scheduling problem for several parallel servers - MATHEMATICAL METHODS OF OPERATIONS RESEARCH, Vol. 66, No. 1, 2007 more
2012
K. Schiefermayr - Inequalities for the Jacobian elliptic functions with complex modulus - JOURNAL OF MATHEMATICAL INEQUALITIES, Vol. 6, No. 1, 2012, pp. 91-94 more
2010
K. Schiefermayr - Geometric properties of inverse polynomial images - PROCEEDINGS APPROXIMATION THEORY, San Antonio, Texas, United States of America, 2010, pp. 277-287 more
2011
J. Kastner, R. Kickinger, D. Salaberger - High resolution X-ray computed tomography for 3D-microstructure characterisation of a cellulose particle filled polymer foam - JOURNAL OF CELLULAR PLASTICS, Vol.… more
2011
J. Kastner, B. Plank, D. Salaberger - Phase contrast imaging with high resolution cone beam X-ray computed tomography - International Symposium on Digital Industrial Radiology and Computed Tomography 2011,… more
2011
M. Reiter, B. Harrer, D. Salaberger, C. Heinzl, C. Gusenbauer, C. Kuhn, J. Kastner - Simulation aided study for optimising device parameters of an industrial X-ray computed tomography system for non-destructive… more
2011
C. Heinzl, J. Kastner, A. Amirkhanov, E. Gröller, M. Reiter - Fast Estimation of Optimal Specimen Placements in 3D X-ray Computed Tomography - International Symposium on Digital Industrial Radiology and… more
2011
A. Amirkhanov, C. Heinzl, M. Reiter, J. Kastner, E. Gröller - Projection-Based Metal-Artifact Reduction for Industrial 3D X-ray Computed Tomography - IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS,… more
2011
B. Plank, B. Harrer, D. Salaberger, J. Kastner - Non-destructive characterization of heterogeneous materials in sub-micron range using Cone-beam X-ray computed tomography - Proceedings of the fifth Research… more
2011
K. Gaubinger, W. Girkinger, M. Kolar - Designcontrolling-Toolbox: A Toolbox for controlling and monitoring of creative potentials within product innovation processes - Designcontrolling-Toolbox: A Toolbox… more
2011
G. Mayr, B. Plank, J. Sekelja, G. Hendorfer - Active thermography as a quantitative method for non-destructive evaluation of porous carbon fiber reinforced polymers - NDT & E INTERNATIONAL, Vol. 44, No.… more
2012
M. Olbrich, G. Zitzenbacher, C. Hochenauer, C. Kneidinger, V. Lawlor - Analytical and Numerical Methods for the Design of Maddock Mixers in Single Screw Plasticizing Technology - MACROMOLECULAR SYMPOSIA,… more
2011
T. Schlagradl, R. Schneider, G. Posch, R. Schnitzer - Development of a Toughness Testing Method for the Effect of Short Heat Treatment Cycles on High-strength Filler Materials Using Subsized Charpy V-Specimens… more
2011
T. Schlagradl, R. Schneider, G. Posch, R. Schnitzer - Development of a Toughness Testing Method for the Effect of Short Heat Treatment Cycles on High-strength Filler Materials Using Subsized Charpy V-Specimens… more
2011
J. Gruber, G. Mayr, G. Hendorfer, J. Sekelja, B. Plank - Digital Shearography & Active Thermography - New Methods for Non-Destructive Testing in the Aviation Industrie - Proceedings of the fifth Research… more
2011
A. Huskic, C. Voit, Z. Simicevic - Investigation of the suitability of metal-ceramic powder mixtures for generative ​​tools - RTejournal, Vol. 8, No. 14, 2011 more
2011
C. Voit, A. Huskic - Metallographic investigations for finding the parameters of a generic metal-ceramic mixture for the selective laser sintering (SLS) - Materialographie Metalle - Keramik -Polymere,… more
2011
K. Krennhuber, A. Jäger - Re-evaluation of potential fermentation inhibitors at 2nd Generation Bioethanol-production - Proceedings of the fifth Research Forum of the Austrian University of Applied Sciences,… more
2011
C. Kneidinger, G. Zitzenbacher, M. Olbrich, K. Steinbrecher - Friction between WPC Bulk Polymers and Metal Surfaces at High Pressures and High Velocity - Symposium for Polymerblends and Nanocomposites… more
2011
H. C. Leindecker - LQG Database - Proceedings of Thermografie Formum Eugendorf, Eugendorf, Austria, 2011, pp. 17 more
2011
M. Jungwirth, B. Hansbauer - Optimization of a Multiphysic Device - a Comparison of a Finite-Element- and a Signal-based Simulation - Proceedings COMSOL Conference 2011, Stuttgart, Germany, 2011 more
2011
S. Hofer, M. Hartl, G. Schestak, R. Schneider, E. Arenholz, L. Samek - Comparison of Austenitic High-Mn-Steels with Different Mn- and C-Contents Regarding their Processing Properties - Journal of Mining,… more
2011
J. Schneckenleitner, R. Schneider, G. Rabler, C. Walch, E. Heinl, J. Mauser, A. Hechtl - Performance of Different Tool Steels for the Cutting of an CP1000 Advanced High Strength Steel - Journal of Mining,… more
2011
R. Schneider, A. Paar, P. Zeller, G. Reiter, W. Schützenhöfer, P. Würzinger - Installation and Startup of an Experimental ESR Plant - Journal of Mining, Metallurgical, Materials, Geotechnical, and… more
2009
R. Schneider, R. Grunwald, C. Schüller - Microstructural Changes During Short-Cycle Heat Tratments of Cold-Work Tool Steels - New challenges in Heat Treatment and Surface Hardening, Dubrovnik, Croatia,… more
2010
R. Schneider, C. Schüller - Surface Hardening of Cold-Work Steels- an Energy Saving and Low Distortion Heat Treatment Alternative - Proceedings of the International Conference on Reduction Of Energy Consumption… more
2009
R. Schneider - Dertermination of Hardness-Impact Toughness Relationship for Short-Cycle Heat Treated Steels - 17. Conference on Materials and Technology, Portoroz, Slovenia, 2009 more
2011
S. Hofer, M. Hartl, G. Schestak, R. Schneider, L. Samek, E. Arenholz - Comparison of Austenitic High-Mn-Steels with Different Mn- and C-Contents Regarding their Processing Properties - 18. Internatinal… more
2011
B. Edlinger, G. Schaffler, C. Burgstaller, G. Zitzenbacher, C. Kneidinger - Influence of glass fibre content in polypropylene on the abrasion wear in a rectangular extrusion slit die - Advances in Polymer… more
2011
K. Liu, G. Zitzenbacher, C. Kneidinger, D. Heim, B. Edlinger, G. Schaffler - Influence of pellet shape and size on friction of polymer pellets in single screw plasticizing units - Advances in Polymer Science… more
2011
G. Metzbauer, J. F. Pühringer, G. Zitzenbacher, P. Reven, C. Kneidinger, D. Heim - A new rheological measuring die to determine the influence of the flow channel surface on wall slippage - Advances in… more
2011
M. Olbrich, G. Zitzenbacher, C. Hochenauer - Numerical and experimental determination of the influence of dispersive mixers on single screw pressure and temperature performance - Advances in Polymer Science… more
2011
G. Grabmair - Model-based Nonlinear Control of 2-WMR - Research and Education in Robotics - EUROBOT 2011, -, Czech Republic, 2011 more
2014
M. Plöderl, R. Silye, G. Zauner, S. Hutterer, K. Schilcher - Atomic force microscopy as a supporting tool in brain tumor diagnosis - Advances in Single-Molecule Research for Biology & Nanoscience, Linz,… more
2018
M. Plöderl, R. Silye, G. Zauner, S. Hutterer, K. Schilcher - Atomic force microscopy and brain tumor diagnosis - ISPM 2018, Tempe , United States of America, 2018, pp. 100 more
2011
M. Plöderl, G. Zauner, R. Silye, S. Hutterer, K. Schilcher - Atomic Force microscopy, A New Supporting Tool in Brain Tumor Diagnosis - Nanoscale 2011, Santa Barbara, United States of America, 2011, pp.… more
2011
V. Lawlor , C. Hochenauer, S. Griesser, G. Zauner, G. Buchinger, D. Meissner, A. Olabi, K. Klein, S. Kuehn, S. Cordiner, A. Mariani - The Use of a High Temperature Wind Tunnel for MT-SOFC Testing---Part… more
2012
V. Lawlor, C. Hochenauer, A. Mariani, S. Griesser, S. Kuehn, K. Klein, A. Olabi, S. Cordiner, D. Meissner, G. Buchinger - Scrutiny of MT-SOFC stack manifolding design using CFD. - Open Fuel Cells Journal,… more
2010
J. Carton, A. Olabi, V. Lawlor - Metal & reticulated vitreous carbon foams as bipolar flow plate material for proton exchange membrane fuel cells - SEEP2010, Bari Italy, Italy, 2010, pp. 77-83 more
2010
V. Lawlor - Study to Characterise the Performance of Micro Tubular Solid Oxide Fuel Cells by the Invention of an Avant Garde Experimental Apparatus and Computational Modelling - Phd Thesis, Dublin City… more
2011
S. Hutterer, F. Auinger, M. Affenzeller - Simulation-based Heuristic Sampling for the Integration of Supply- and Demand-Side Stochastic Influences - ComForEn2011, Wels, Austria, 2011 more
2011
J. Weghuber, M. Aichinger, M. Brameshuber, S. Wieser, V. Ruprecht, B. Plochberger, J. Madl, A. Horner, S. Reipert, K. Lohner, T. Henics, G. Schütz - Cationic amphipathic peptides accumulate sialylated… more
2011
R. Edlinger, M. Zauner, W. Rokitansky - Wheeled Mobile Autonomous Robot for Eurobot 2011 - 2nd International Conference on Robotics in Education, Vienna, Austria, 2011, pp. 147-150 more
2011
M. Zauner, R. Edlinger, W. Rokitansky - Electronic Platform for Small Robots in Education - 2nd International Conference on Robotics in Education, Vienna, Austria, 2011, pp. 125-128 more
2011
K. Schiefermayr - Inverse polynomial images and inequalities for polynomials minimal with respect to the maximum norm - Habilitation Thesis, Johannes Kepler Universität Linz, Austria, 2011 more
2010
J. Weghuber - Imaging of Mobile Long-lived Nanoplatforms in the Live Cell Plasma Membrane - JOURNAL OF BIOLOGICAL CHEMISTRY, Vol. 285, No. 53, 2010, pp. 2581-2590 more
2010
J. Weghuber - Resting State Orai1 Diffuses as Homotetramer in the Plasma Membrane of Live Mammalian Cells - JOURNAL OF BIOLOGICAL CHEMISTRY, Vol. 285, No. 52, 2010 more
2010
J. Weghuber - Cholesterol SlOWS down the Lateral Mobility of an Oxidized Phospholipid in a Supported Lipid Bilayer - LANGMUIR, Vol. 26, No. 22, 2010 more
2010
J. Weghuber - Antimicrobial and immunostimulatory peptide, KLK, induces an increase in cytosolic Ca(2+) concentration by mobilizing Ca(2+) from intracellular stores - CELL BIOLOGY INTERNATIONAL, Vol.… more
2010
J. Weghuber - Lpe10p modulates the activity of the Mrs2p-based yeast mitochondrial Mg(2+) channel - FEBS Journal, Vol. 277, No. 17, 2010 more
2010
J. Weghuber - Temporal resolution of protein-protein interactions in the live-cell plasma membrane - Analytical and Bioanalytical Chemistry, Vol. 387, No. 8, 2010 more
2010
J. Weghuber - Direct Observation and Quantitative Analysis of Lck Exchange between Plasma Membrane and Cytosol in Living T Cells - JOURNAL OF BIOLOGICAL CHEMISTRY, Vol. 285, No. 9, 2010 more
2010
J. Weghuber - in-vivo detection of protein-protein interactions on micro-patterned surfaces - Journal of Visualized Experiments, Vol. 3, No. 19, 2010 more
2010
J. Weghuber - DETECTION OF PROTEIN-PROTEIN INTERACTIONS IN THE LIVE CELL PLASMA MEMBRANE BY QUANTIFYING PREY REDISTRIBUTION UPON BAIT MICROPATTERNING - METHODS IN ENZYMOLOGY, Vol. 2010, No. 472, 2010 more
2010
J. Weghuber - Measuring Colocalization by Dual Color Single Molecule Imaging: Thresholds, Error Rates, and Sensitivity in Advances in Planar Lipid Bilayers and Liposomes (Contributions to Book: Part/Chapter/Section… more
2009
J. Weghuber - A Root-Expressed Magnesium Transporter of the MRS2/MGT Gene Family in Arabidopsis thaliana Allows for Growth in Low-Mg2+ Environments - PLANT CELL, Vol. 21, No. 12, 2009 more
2009
J. Weghuber - Reply to "Uncoupling diffusion and binding in FRAP experiments" - Nature Methods, Vol. 6, No. 3, 2009 more
2009
J. Weghuber - Cell-to-cell variability in the diffusion constants of the plasma membrane proteins CD59 and CD147 - Soft Matter, Vol. 5, No. 17, 2009 more
2008
J. Weghuber - Micropatterning for quantitative analysis of protein-protein interactions in living cells - Nature Methods, Vol. 5, No. 12, 2008 more
2007
J. Weghuber - Mrs2p forms a high conductance Mg2+ selective channel in mitochondria - BIOPHYSICAL JOURNAL, Vol. 93, No. 11, 2007 more
2008
J. Weghuber - Different Types of Cell-to-Cell Connections Mediated by Nanotubular Structures - BIOPHYSICAL JOURNAL, Vol. 95, No. 9, 2008 more
2006
J. Weghuber - Mutational analysis of functional domains in Mrs2p, the mitochondrial Mg2+ channel protein of Saccharomyces cerevisiae - FEBS Journal, Vol. 273, No. 6, 2006 more
2003
J. Weghuber - Mrs2p is an essential component of the major electrophoretic Mg2+ influx system in mitochondria - EMBO JOURNAL, Vol. 22, No. 6, 2003 more
2011
H. Kahr, A. Jäger - Bioethanol from Straw: When? - Inform, Vol. 2, No. 3, 2011, pp. 15-20 more
2011
A. Jäger, H. Steinmüller, J. Lindorfer, M. Mandl - A new Multi-Feedstock-Bioreffinery Concept - Proceedings of the fifth Research Forum of the Austrian University of Applied Sciences, Wien (Favoriten),… more
2011
H. Kahr, S. Helmberger, A. Jäger - Improvements in Bioethanol Production from straw - Proceedings of the fifth Research Forum of the Austrian University of Applied Sciences, Wien (Favoriten), Austria,… more
2011
T. Raab, A. Jäger, H. Steinmüller, M. Mandl, J. Ecker - Optimization of a multi feedstock - Proceedings of the fifth Research Forum of the Austrian University of Applied Sciences, Wien (Favoriten), Austria,… more
2011
H. Kahr, A. Jäger - Improvements in Bioethanol Production Process from Straw - Proceedings World Renewable Energy Congress – Linköping, Sweden, Linköping, Sweden, 2011 more
2011
K. Eisenhuber, K. Krennhuber, A. Jäger - Einteilung erneuerbarer Rohstoffe für die Bioenergieherstellung durch grundlegende chemische Charakterisierung - Proceedings of the fifth Research Forum of the… more
2011
A. Jäger, D. Steindl, V. Steinmüller - Production of biogas from orange peels - Proceedings of the fifth Research Forum of the Austrian University of Applied Sciences, Wien (Favoriten), Austria, 2011,… more
2011
A. Jäger, S. Helmberger, A. Eder, P. Lanzerstorfer, C. Lanzerstorfer - Utilization of wheat- and maize straw in biogas plants - Proceedings Central European Biomass Conference Graz 2011, Graz, Austria,… more
2011
H. Kahr, A. Eder, K. Krennhuber, T. Raab, A. Jäger - Bioethanol from straw: Alternative for Austria? - Proceedings Central European Biomass Conference Graz 2011, Graz, Austria, 2011, pp. 156 more
2011
M. Kröppl - Characterization of ashes from biomass incineration and investigation of usability - Phd Thesis, TU Wien / Inst. f. Chem. Tech. u. Analytik, Austria, 2011, pp. 1-154 more
2011
M. Kröppl, C. Lanzerstorfer - Biomass ashes as secondary material in the cement industry - XIV Hungarian and Italian Symposium on Spectrochemistry, Sümeg, Hungary, 2011, pp. 41 more
2008
W. Witteveen - Modal computation of jointed structures - Phd Thesis, Johannes Kepler Universität Linz, Austria, 2008 more
2005
K. Schiefermayr - Some new properties of Jacobi's theta functions - JOURNAL OF COMPUTATIONAL AND APPLIED MATHEMATICS, Vol. 178, No. 2, 2005, pp. 419-424 more
2004
K. Schiefermayr, F. Peherstorfer - Description of inverse polynomial images which consist of two Jordan arcs with the help of Jacobi's elliptic functions - COMPUTATIONAL METHODS AND FUNCTION THEORY,… more
2012
J. Kastner, B. Plank, G. Requena - Non-destructive characterisation of polymers and Al-alloys by polychromatic cone-beam phase contrast tomography - MATERIALS CHARACTERIZATION, Vol. 64, No. 2, 2012, pp.… more
2011
F. Schweitzer, O. Gassmann, K. Gaubinger - Open innovation and its effectiveness to embrace turbulent environments - International Journal of Innovation Management, Vol. 15, No. 6, 2011, pp. 1191-1207 more
2011
C. Schiller-Ripota - social skills training in social skills training - education group, 2011, pp. 163-184 more
2011
A. Loch, V. Prüller - Dealing with conflicts after the conflict: European and indigenous approaches to conflict transformation in East Timor - Conflict Resolution Quarterly, Vol. 28, No. 3, 2011, pp.… more
2011
H. C. Leindecker - Tool for life cycle improvement of the building quality - e-nova 2011, Pinkafeld, Austria, 2011, pp. 81-88 more
2011
C. Neumüller, C. Lanzerstorfer - Increased utilization of heat in biogas plants by satellite cogenerators - Biogas Congress, Graz, Austria, 2011, pp. 38-46 more
2012
C. Stallinger, J. F. Pühringer, C. Hochenauer, G. Zitzenbacher, M. Längauer, G. Metzbauer, C. Maticka - Determination of optimization potentials of an extrusion slit die used for production of polymer… more
2011
M. Egger, K. Hoffmann - Tracking of Flat Belts by Skewing Pulley Axis - Tracking of Flat Belts by Skewing Pulley Axis, Guanajuato, Mexico, 2011 more
2012
K. Sherif, H. Irschik, W. Witteveen - Transformation of Arbitrary Elastic Mode Shapes Into Pseudo-Free-Surface and Rigid Body Modes for Multibody Dynamic Systems - Journal of computational and nonlinear… more
2012
H. C. Leindecker - Aspects of Mobility in Building Certification Systems - 14. FM&REM Conference Proceedings, Kufstein, Austria, 2012, pp. 8 more
2011
M. Breitfuss, W. Witteveen - Efficient mode based approach for the dynamics of jointed FE structures - Proceedings of the 8th International Conference on Structural Dynamics - EURODYN 2011, Leuven, Belgium,… more
2012
W. Witteveen - Comparison of CMS, Krylov and balanced truncation based model reduction from a mechanical application engineer’s perspective - Proceedings of SEM IMAC XXX, Jacksonville, United States… more
2012
M. Breitfuss, W. Witteveen, G. Prechtl - On the Mode Based Simulation of Dry Friction inside Lap Joints - Proceedings of SEM IMAC XXX, Jacksonville, United States of America, 2012 more
2012
K. Liu, G. Zitzenbacher, C. Kneidinger, D. Heim, G. Schaffler, B. Edlinger - Influence of surface roughness and pellet shape and size on the external coefficient of friction of polymer pellets - Proceedings… more
2011
V. Steinmüller, H. Steinmüller - WINUBIO-Alternative Technology to improve Austria’s Biogas capacity - Progress in Biogas II, Stuttgart Hohenheim, Germany, 2011 more
2012
M. Egger - Tracking of Flat Belts - Journal of Mechanics Engineering and Automation, Vol. 2, No. 1, 2012, pp. 27-36 more
2012
H. Kahr, A. Jäger, C. Lanzerstorfer - Bioethanol production from steam-explosion pretreated straw in Bioethanol (Editors: Lima MAP and Natalense APP ) - InTech, 2012, pp. 153-172 more
2014
K. Schiefermayr - A density result concerning inverse polynomial images - PROCEEDINGS OF THE AMERICAN MATHEMATICAL SOCIETY, Vol. 142, No. 2, 2014, pp. 539-545 more
2012
H. C. Leindecker - Principles for Sustainable Buildings - TIM Experts Day Proceedings, Wels, Austria, 2012, pp. 29 more
2012
H. C. Leindecker - Life cycle oriented improvement of the building quality - WSED 2012 Proceedings, Wels, Austria, 2012, pp. 1 more
2011
W. Steiner, S. Reichl - A contribution to inverse dynamical problems in multibody systems - A contribution to inverse dynamical problems in multibody systems, Brussels, Belgium, 2011 more
2012
H. C. Leindecker - Criteria of Mobility für Sustainable Buildings - Proceedings of 6th FFH 2012, Graz, Austria, 2012, pp. 95-100 more
2012
W. Steiner, S. Reichl - The Optimal Control Approach to Dynamical Inverse Problems - JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, Vol. 134, No. 10, 2012 more
2013
J. F. Pühringer, G. Zitzenbacher, C. Spreitzer - Study of the heat absorption in the thermoforming process for transparent and filled polystyrene - INTERNATIONAL POLYMER PROCESSING, Vol. 28, No. 1, 2013,… more
2012
C. Heinzl, J. Kastner, A. Amirkhanov, E. Gröller, C. Gusenbauer - Optimal Specimen Placement in Cone Beam X-ray Computed Tomography - NDT & E INTERNATIONAL, Vol. 99, No. 99, 2012, pp. 1-25 more
2012
S. Hutterer, G. Zauner, K. Schilcher, R. Sylie - Data Mining Techniques for AFM- Based Tumor Classification - IEEE Computational Intelligence in Bioinformatics and Computational Biology - CIBCB, San Diego,… more
2012
S. Hutterer, F. Auinger, M. Affenzeller - Metaheuristic Optimization of Electric Vehicle Charging Strategies in Uncertain Environment - Proceedings of the 12th International Conference on Probabilistic… more
2012
S. Hutterer, F. Auinger, M. Affenzeller - Optimal Scheduling of Electric Individual Traffic Under Probabilistic Conditions - Proceedings FFH 2012, Graz, Austria, 2012, pp. 47-51 more
2012
A. Reh, B. Plank, J. Kastner, E. Gröller, C. Heinzl - Porosity Maps - Interactive Exploration and Visual Analysis of Porosity in Carbon Fiber Reinforced Polymers - COMPUTER GRAPHICS FORUM, Vol. 31, No.… more
2012
A. Paar, R. Schneider, G. Reiter, P. Zeller, P. Würzinger, M. Wöls, S. Paul - Influence of selected electrical parameters on the ESR Process. - Proceedings of the 19th International Student's Day… more
2012
K. Sherif, W. Witteveen, K. Mayerhofer - Quasi-static consideration of high-frequency modes for more efficient flexible multibody simulations - ACTA MECHANICA, Vol. 223, No. 6, 2012, pp. 1285-1305 more
2012
K. Steineder, R. Schneider - Examination of the toughness-hardness-relation of 51CrV4 using different short-cycle heat treatments - Proceedings of the 19th International Student's Day of Metallurgy,… more
2012
T. Koch, D. Salaberger - Methods for Characterizing the 3-D Morphology of Polymer Composites - MACROMOLECULAR SYMPOSIA, Vol. 315, No. 1, 2012, pp. 115-124 more
2012
G. Standfest, A. Kutnar, B. Plank, A. Petutschnigg, F. Kamke, M. Dunky - Microstructure of viscoelastic thermal compressed (VTC) wood using computed microtomography - WOOD SCIENCE AND TECHNOLOGY, Vol.… more
2012
B. Plank - From the granules to injection-molded component: Influence of the injection moulding process chain on Fiber length distribution determined by X-ray computed tomography. - Master/Diploma Thesis,… more
2012
S. Hutterer, M. Affenzeller, F. Auinger - Evolutionary Optimization of Multi-Agent Control Strategies for Electric Vehicle Charging - Companion Publication of the 2012 Genetic and Evolutionary Computation… more
2012
J. Kastner, B. Harrer, G. Requena - Microstructure characterization of high-strength Al-alloys by high resolution X-ray computed tomography - Proceedings of 12th World Conference on Non-Destructive Testing,… more
2012
J. Kastner, D. Salaberger, B. Plank - High resolution X-ray computed tomography of fibre and particle filled polymers - Proceedings of 12th World Conference on Non-Destructive Testing, Durban, South Africa,… more
2012
J. Kastner, B. Plank, V. Revol, C. Kottler - Comparison of phase contrast X-ray computed tomography methods for non-destructive testing of materials - Proceedings of 12th World Conference on Non-Destructive… more
2012
J. Kastner, B. Plank, D. Salaberger - Quantitative Evaluierung von Röntgen-CT-Daten von glasfaserverstärkten Kunststoffen zur Bestimmung von Faserlängenverteilung und -orientierung. - Proceedings FFH… more
2012
J. Kastner - X-ray computed tomography for the development of materials and components - Habilitation Thesis, Technische Universität Wien, Austria, 2012 more
2012
S. Hutterer, M. Affenzeller, F. Auinger - Heuristic Power Scheduling of Electric Vehicle Battery Charging - LECTURE NOTES IN COMPUTER SCIENCE, Vol. 6927, No. 1, 2012, pp. 311-318 more
2012
B. Heise, S. Schausberger, S. Häuser, B. Plank, D. Salaberger, E. Leiss-Holzinger, D. Stifter - Full-field optical coherence microscopy with a sub-nanosecond supercontinuum light source for material research… more
2012
V. Steinmüller, K. Eisenhuber, K. Krennhuber, D. Steindl, H. Kahr, A. Jäger - OPTIMAL ENERGY OUTPUT OF A LIGNOCELLULOSIC RESIDUAL BASED BIOREFINERY - EU BC&E Proceedings 2012, Mailand, Italy, 2012 more
2011
A. Jäger, H. Kahr, V. Steinmüller, D. Steindl - Utilisation of wheat- and maize straw in biogas plants - Proceedings Central European Biomass Conference Graz 2011, Graz, Austria, 2011, pp. 2 more
2012
K. Gaubinger, F. Schweitzer, R. Zweimüller - A commercialization process model for technology innovations - Proceedings of the XXIII ISPIM Conference, 17.-20. June 2012, Barcelona, Barcelona, Spain, 2012,… more
2012
K. Gaubinger, F. Schweitzer, R. Zweimüller - Framework for sustainable oriented technology development - Proceedings of the 7th International Scientific Conference “Business and Management 2012”,… more
2012
F. Schweitzer, K. Gaubinger, O. Gassmann - How can the front-end of product innovations be structured? - Proceedings of the XXIII ISPIM Conference, 17.-20. June 2012, Barcelona, Barcelona, Spain, 2012,… more
2012
K. Gaubinger, F. Schweitzer, R. Zweimüller - Technology commercialisation framework for automotive suppliers - Proceedings FFH 2012, Graz, Austria, 2012 more
2012
W. Hauer - Re–ignition phenomena in low–voltage circuit breaker - Phd Thesis, Technische Universität Wien, Austria, 2012, pp. 132 more
2012
G. Standfest, M. Dunky, S. Kranzer, B. Plank, D. Salaberger, A. Petutschnigg - 3D pore size characterisation by means of image analysis and mathematical morphology - JOURNAL "HOLZTECHNOLOGIE",… more
2012
D. Borgmann, J. Weghuber, S. Schaller, J. Jacak, S. M. Winkler - Identification of Patterns in Microscopy Images of Biological Samples using Evolution Strategies - Proceedings of the 24th European Modeling… more
2012
S. Hutterer, F. Auinger, D. Rumetshofer - Simulation und Optimierung von Ladevorgängen an steuerbaren E-Ladesäulen - ComForEn 2012 - Communication for Energy, Wels, Austria, 2012 more
2012
K. Liu, G. Zitzenbacher, C. Kneidinger, W. Stadlbauer, B. Edlinger, G. Schaffler - Effect of molecular weight and pellet shape on the external coefficient of friction of different polypropylene grades… more
2011
K. Liu - Influence of surface roughness, pellet shape and size and molecular weight on the external coefficient of friction of polymer pellets - Master/Diploma Thesis, FH OÖ Forschungs & Entwicklungs… more
2008
K. Liu - Deposition of amophous Si-doped carbon layers via plasma-enhanced chemical vapor deposition - Master/Diploma Thesis, FH OÖ Forschungs & Entwicklungs GmbH, Austria, 2008 more
2012
C. Kneidinger, K. Liu, G. Zitzenbacher, K. Steinbrecher - FRICTIONAL BEHAVIOR OF BIOPLASTICS AT SCREW SURFACES UNDER PROCESSING CONDITIONS - Polymer Processing Society (PPS) Americas Conference, Niagara… more
2012
M. Jerabek, M. Reiter, H. Herbst, B. Plank, D. Salaberger, Z. Major - Characterization of short fiber reinforced polypropylene composites - Conference on Industrial Computed Tomography, Wels, Austria,… more
2012
J. Charwat-Pessler, E. Wernersoon, B. Plank, M. Musso, P. Schuller-Götzburg, G. Standfest, B. Mies, A. Petutschnigg - 3D Analysis of heterogenous and biogenic structures based on bone augmentation material… more
2012
R. Widmann, S. Grünberger, B. Stadlmann, J. Langer - System Integration of NFC Ticketing into an Existing Public Transport Infrastructure - 2012 4th International Workshop on Near Field Communication,… more
2012
S. Sunzenauer, V. Zojer, A. Tröls, M. Brameshuber, J. Weghuber, H. Stockinger, G. Schütz - Determination of binding curves via protein micropatterning in vitro and in living cells - CYTOMETRY, Vol. 1,… more
2012
B. Stadlmann, F. Kaiser, S. Mairhofer - Satellite positioning-based train control system for the Pinzgauer local rail line - Rail Signalling and Telecommunication, Vol. 2012, No. 5, 2012, pp. 28-33 more
2012
R. Mesquita, R. Schneider, K. Steineder, E. Arenholz, L. Samek - Phase transformation of austenite during isothermal holding of a high-performance high-manganese steel - Proceedings of 4th International… more
2012
D. Salaberger, H. Scharleitner, J. Kastner - Analysis of ink distribution in polymer foams by X-ray computed tomography - DACH NDT Annual Meeting 2012, Graz, Austria, 2012 more
2012
J. Kastner, D. Salaberger, B. Plank - High resolution X-ray computed tomography of fibre and particle reinforced plastics - DACH NDT Annual Meeting 2012, Graz, Austria, 2012 more
2012
J. Kastner, D. Salaberger, B. Plank, A. Reh, C. Heinzl - Advanced X-ray tomographic methods for quantitative characterisation of carbon fibre reinforced polymers - Proceedings 4th International symposium… more
2012
J. Kastner, B. Plank, C. Gusenbauer, B. Harrer, G. Requena - 3d-Microstructure investigations on light metal alloys by means of X-ray computed tomography - Proceedings 7. Ranshofener Leichtmetalltage,… more
2012
J. Kastner - Editor - Proceedings Conference on Industrial Computed Tomography 2012, Wels, Austria, 2012 more
2012
A. Amirkhanov, M. Reiter, J. Kastner, E. Gröller, C. Heinzl - Evaluation of Projection-Based Metal-Artifact Reduction for Multi-Material Components - Conference on Industrial Computed Tomography, Wels,… more
2012
M. Reiter, M. Krumm, S. Kasperl, C. Kuhn, D. Weiss, M. Erler, C. Gusenbauer, C. Heinzl, J. Kastner - Evaluation of transmission based image quality optimisation for X-ray computed tomography - Conference… more
2012
H. Qureshi, M. Malik, M. Anas Ahmad, C. Heinzl - Benchmarking of De-noising Techniques for Streaking Artifacts in Industrial 3DXCT Scan Data - 20-th International Conference in Central Europe on Computer… more
2012
S. Schaller, S. M. Winkler, J. Weghuber, M. Sams, J. Jacak - µDetect: Design of a Framework for Optimized Structure Analysis in Fluorescence Microscopy Images - Proceedings of 6th FFH 2012, Graz, Austria,… more
2014
S. Hutterer, A. Beham, M. Affenzeller, F. Auinger, S. Wagner - Software-Enabled Investigation in Metaheuristic Power Grid Optimization - IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS, Vol. 10, No. 1, 2014,… more
2012
S. Schaller, J. Jacak, D. M. Borgmann, J. Weghuber, S. M. Winkler - An Image Analysis Suite for Automated Spot Detection in Cellular and Nano Structures of Microscopy Images - Proceedings of the 20th Annual… more
2012
F. Schweitzer, H. Gsottbauer, I. Gabriel - Building & Living 2020+ - Report, Wirtschaftskammer Österreich, Austria, 2012 more
2012
F. Schweitzer - Crowdsourcing: Leveraging Innovation through Online Idea Competitions - Research-Technology Management, Vol. 55, No. 3, 2012, pp. 32-38 more
2012
F. Schweitzer, I. Gabriel - Action at the front end of innovation - International Journal of Innovation Management, Vol. 16, No. 6, 2012 more
2012
F. Schweitzer, O. Gassmann - 'The role of proactive marketing in the early phases of product innovation - Proceedings of the Global Marketing Conference at Seoul, Seoul, Republic of Korea, 2012 more
2012
F. Schweitzer - The Impact of Proactive Marketing at the Fuzzy Front End of Innovation - Proceedings of the AMA Summer Conference, Chicago, United States of America, 2012 more
2012
F. Schweitzer, I. Gabriel - Success Factors for the Front End of Innovation - Proceedings of the XXIII ISPIM Conference, 17.-20. June 2012, Barcelona, Barcelona, Spain, 2012 more
2012
F. Schweitzer, K. Gaubinger, O. Gassmann - A three-track process model of the front end of innovation in the machine building industry - Proceedings of the XXIII ISPIM Conference, 17.-20. June 2012, Barcelona,… more
2012
F. Schweitzer, O. Gassmann, I. Gabriel - The effect of project planning at the front end of innovation - Procceedings of the 2012 R&D Management Conference, Grenoble Ecole de Management, France, 2012 more
2012
S. Hutterer, M. Affenzeller, F. Auinger - Policy evolution for large scale electric vehicle charging control - PROCEEDINGS OF THE 14TH INTERNATIONAL CONFERENCE ON HARBOR, MARITIME & MULTIMODAL LOGISTICS… more
2012
T. Schrag, E. Stocker, C. Wartha, E. Hasler, H. C. Leindecker - Combined database for LCC, LCA and life-cycle quality - Life-Cycle and Sustainability of Civil Infrastructure Systems, Vienna, Austria, 2012,… more
2012
H. C. Leindecker - Quality improvement with klima:aktiv building standards - Thermografie Forum Eugendorf 2012, Eugendorf, Austria, 2012, pp. 16 more
2012
H. C. Leindecker - Problem of system boundaries - Aspects of mobility in building certification standards - enova 2012, Pinkafeld, Austria, 2012, pp. 273-279 more
2013
A. Huskic, M. Kendel - Influence of coating on galling - XXX. Colloquium on metal forming , Planneralm, Austria, 2013, pp. 43-49 more
2012
A. Huskic, N. Wild - lubricate in deep drawing - MachineryMarket, Vol. 5, No. 3, 2012, pp. 16-17 more
2016
A. Huskic, J. Giedenbacher, N. Wild, U. Pschebezin - Rapid Tooling for forming tools - Rapid Tech, Erfurt, Germany, 2016 more
2012
A. Huskic, J. Giedenbacher, N. Wild, U. Pschebezin - SLS for forming tools - RTejournal, Vol. 2012, No. 9, 2012 more
2011
A. Huskic, M. Kendel - Investigation and characterization of zinc abrasion for stamping body panels - Proceedings of the fifth Research Forum of the Austrian University of Applied Sciences, Wien (Favoriten),… more
2010
A. Huskic, M. Kendel - Untersuchung des Zinkabriebs beim Tiefziehen von verzinkten Feinblechen - 29. Colloquium on metal forming , Planneralm, Austria, 2010, pp. 97-102 more
2012
J. Gruber, B. Stotter, G. Mayr, G. Hendorfer - Prospects of Pulse Phase Thermography for Finding Disbonds in CFRP-Sandwich Parts with Aluminum Honeycomb Cores Compared to Ultrasonic - American Institute… more
2011
G. Mayr, G. Hendorfer, J. Gruber - Comparative study of pulsed thermography and ultrasonic testing for porous carbon fibre reinforced polymers - Advances in Polymer Science and Technology Two, Linz, Austria,… more
2015
G. Mayr, G. Hendorfer, J. Sekelja, B. Plank - Quantitative Bestimmung der Porosität in kohlefaserverstärkte Polymerverbundwerkstoffe mittels Pulsthermographie - Tagungsband des Thermographie-Kolloquium,… more
2011
G. Mayr, J. Gruber, G. Hendorfer - Analytical and numerical computations of heat transfer in pulsed thermography applied to porous CFRP - Review of Progress in Quantitative Nondestructive Evaluation, Burlington,… more
2012
P. Lanzerstorfer, S. Sunzenauer, M. Brameshuber, G. Schütz, S. Takahashi, M. Bünemann, O. Höglinger, J. Weghuber - Drug screening on signal transduction proteins via µ-patterned surfaces - Biophysical… more
2012
P. Lanzerstorfer, S. Sunzenauer, M. Brameshuber, G. Schütz, O. Höglinger, M. Bünemann, J. Weghuber - Multimerization studies of membrane receptors via µ-patterned surfaces - Biophysical Society meeting… more
2012
P. Lanzerstorfer, O. Höglinger, J. Weghuber - Studying molecular effects of plant polyphenols on plasma-membrane localized signalling molecules - 67. ALVA Jahrestagung, Wien, Austria, 2012 more
2011
J. Gruber, G. Mayr, G. Hendorfer - Prospects and Limitations of Digital Shearography and Active Thermography in Finding and Rating Flaws in CFRP Sandwich Parts with Honeycomb Core - American Institute… more
2012
M. Kröppl, O. Höglinger, T. Kampitsch, P. Lanzerstorfer, J. Weghuber, B. Redl - Biochemical characterization of apple cultivars from Upper Austria - Biochemische Charakterisierung von Apfelsorten aus… more
2012
M. Kröppl, C. Lanzerstorfer - Optimization of leaching conditions for heavy metals decontamination of biomass fly ashes - 37th International Symposium on Environmental Analytical Chemistry, Antwerpen,… more
2012
M. Kröppl, C. Lanzerstorfer - Acidic extraction and precipitation of heavy metals from biomass incinerator cyclone fly ash - 16th International Conference on Heavy Metals in the Environment, Rom, Italy,… more
2012
M. Kröppl, C. Lanzerstorfer - Plant nutrients in different grain size fractions of biomass fly ashes - XXth Slovak - Czech Spectroscopic Conference, Tatranska Lomnica, Slovakia, 2012, pp. 74 more
2012
M. Kröppl, M. Zeiner, I. Juranovic-Cindric, G. Stingeder - Differences in aluminium content of various tea powders (black, green, herbal, fruit) and tea infusions - European Chemical Bulletin, Vol. 9,… more
2012
M. Kröppl, M. Zeiner, I. Juranovic-Cindric, G. Stingeder - Comparison of certain elemental mounts in black, green, fruit, and herbal teas - 4th International Symposium on trace elements in the food chain,… more
2012
M. Tóth, G. Moser, C. Gusenbauer - Analysis of the middle ear mechanics with micro-CT - Conference on Industrial Computed Tomography, Wels, Austria, 2012, pp. 307-310 more
2012
S. Großeiber, G. Requena, E. Kozeschnik, C. Gusenbauer, S. Ilie - Correlation between hot ductility and damage in microalloyed steel slabs - Conference on Industrial Computed Tomography, Wels, Austria,… more
2011
H. Graf, B. Stadlmann, B. Rüger - smartSTORE - The Innovative Systerm for Automatic Luggage Storage Services at Railway Stations - Proceedingas of the 19th International Symposium EURO-ZEL 2011, Zilina,… more
2011
B. Rüger, H. Graf, B. Stadlmann - Luggage Lockers - Needs and Expectations of Passengers - Proceedingas of the 19th International Symposium EURO-ZEL 2011, Zilina, Slovakia, 2011, pp. 321-328 more
2012
O. Gebauer, W. Pree, G. Hanis, B. Stadlmann - Towards Autonomously Driving Trains on Tracks With Open Access - Proceedings of 19th ITS World Congress, Wien, Austria, 2012, pp. 10 more
2012
B. Rüger, H. Graf, B. Stadlmann - Luggage Storage on Railway Stations - Needs and Expectations of Passengers - ETR, Vol. 2012, No. 6, 2012, pp. 67-71 more
2012
J. F. Pühringer - Mutual Interactions between Crystallization and Flow in Polypropylene - Phd Thesis, Johannes Kepler Universität, Linz - Institut für Polymer Wissenschaften, Austria, 2012, pp. 220 more
2012
H. Kahr, A. Jäger - Lignocellulolisic Biorefineries - Reserach in Austria in Forum Econogy (Editors: F. Schneider, H.S Steinmüller) - Trauner Verlag Linz, 2012, pp. 167-180 more
2012
A. Jäger, H. Kahr - A new concept for a multiple feedstock biorefinery - IEA Bioenergy Conference 212, Vienna, Austria, 2012, pp. 67-75 more
2012
V. Lawlor - Highlighting of Critical Experimental Data for SOFC Modeling That is Missing From the Literature and Potential of N-IR Thermography for SOFC Study - Journal of Fuel Cell Science and Technology,… more
2012
V. Lawlor, C. Hochenauer, G. Zauner, S. Kuehn, A. Olabi, S. Cordiner, T. Obrlik, S. Griesser, G. Buchinger - HIT-SIM Project Report: Communication of Project Results and Brief Discussion - Proceedings… more
2009
V. Lawlor, G. Zauner, G. Buchinger, S. Griesser, A. Olabi, C. Hochenauer, D. Meissner - Combination of a high temperature wind tunnel and thermal camera measurements for MT-SOFC stack model validation… more
2013
S. Wieland, T. Gruenewald, S. Ostrowski, B. Plank, G. Standfest, B. Mies, A. Petutschnigg - Assessment of mechanical properties of wood-leather panels and the differences in the panel structure by means… more
2012
W. Witteveen - On the Modal and Non-Modal Model Reduction of Metallic Structures with Variable Boundary Conditions - World Journal of Mechanics, Vol. 2, No. 6, 2012, pp. 311-324 more
2012
M. Jungwirth, W. Baumgartinger, M. Kaltenbacher - Transformer Modeling taking into account Hysteresis Behavior - PROCEEDINGS OF THE 14TH INTERNATIONAL CONFERENCE ON HARBOR, MARITIME & MULTIMODAL LOGISTICS… more
2012
M. Zeiner, M. Kröppl, I. Juranovic-Cindric, G. Stingeder - Comparison of magnesium amount in black, green, fruit, and herbal teas - European Chemical Bulletin, Vol. 2, No. 3, 2012, pp. 99-102 more
2012
K. Eisenhuber - Remeasuring and revaluation of inhibitors during the bioethanol fermentation - Master/Diploma Thesis, FH OÖ Fakultät Wels, Austria, 2012 more
2013
W. Hauer, G. Zauner - High-temperature dual-band thermal imaging by means of high-speed CMOS camera system - SPIE Electronic Imaging 2013: Machine Vision Applications VI, San Francisco, United States of… more
2013
S. Hutterer, M. Affenzeller, F. Auinger - Evolutionary Computation Enabled Controlled Charging for E-Mobility Aggregators - Proceedings of the IEEE Symposium on Computational Intelligence Applications… more
2013
S. Hutterer, S. Mayr, G. Zauner, R. Silye, K. Schilcher - Data Mining Supported Analysis of Medical Atomic Force Microscopy Images - Proceedings of the IEEE Symposium on Computational Intelligence in Healthcare… more
2013
T. Bayer, G. Zitzenbacher, A. Giesbrecht, J. F. Pühringer, D. Vaught - Influence of flow channel surface on melt fracture and wall sliding behavior of a polypropylene melt - PPS-29 Conference Proceedings,… more
2013
T. Köpplmayr, I. Milosavljevic, M. Aigner, R. Hasslacher, B. Plank, D. Salaberger, J. Miethlinger - Influence of fiber orientation and length distribution on the rheological characterization of glass-fiber-filled… more
2013
H. Weinzierl, D. Hofinger, M. Jungwirth - Automated modeling of inductive power electronic components - Lecture Notes in Computer Science LNCS 8111, Las Palmas de Gran Canaria, Spain, 2013, pp. 3 more
2013
F. Auinger, S. Hutterer, D. Rumetshofer - Simulation and Optimization of Charging Strategies on Controllable Charging- Equipment for Electric Vehicles - Lecture Notes in Computer Science LNCS 8111, Las… more
1997
R. Höller, F. Renzoni, L. Windholz, J. Xu - Coherent population trapping on the sodium D1 line in high magnetic fields - JOURNAL OF THE OPTICAL SOCIETY OF AMERICA B-OPTICAL PHYSICS, Vol. 14, No. 9, 1997,… more
2012
H. Scharleitner - 2D In-situ Investigations of Polymer Foams by Means of Radiography and 3D Structural Analysis by means of X-ray Computed Tomography - Master/Diploma Thesis, FH OÖ Forschungs & Entwicklungs… more
2013
H. C. Leindecker, F. Mayr - Energy monitoring of selected buildings - Proceedings FFH 2013, Dornbirn, Austria, 2013, pp. 431-437 more
2013
K. Sherif, W. Witteveen, H. Holl, K. Mayrhofer - Efficient simulation of work and supporting roll under consideration of local effects - 10th International Conference on Vibrations in rotating machines,… more
2012
R. Schneider, T. Schlagradl, C. Schüller, R. Grunwald - Determination of the relationship between hardness and toughness for short heat treatment cycles - HTM J. Heat Treatment Material, Vol. 67, No.… more
2012
R. Werl, W. Winkler, A. Pissenberger, M. Egger, S. Aigner, J. Pühringer, S. Michelic, C. Bernhard, W. Schützenhöfer, R. Schneider, C. Schüller - Examples of the Use for New Analytical Testing Techniques… more
2013
G. Zauner, T. Schulte, C. Forsich, D. Heim - CCD camera-based analysis of thin film growth in industrial PACVD processes - SPIE Optical Metrology 2013, Munich, Germany, 2013 more
2013
B. Plank, C. Gusenbauer, D. Salaberger, J. Kastner - Computed tomography links together: A wide range of applications enables interdisciplinary collaborations with research, industry and business - Proceedings… more
2013
K. Steineder, R. Schneider - Influence of short-cycle heat treatment conditions on the hardness-toughness-relationship of the steels 51CrV4, ~74NiCr2 and 100Cr6 - HTM J. Heat Treatment Material, Vol. 68,… more
2013
V. Revol, B. Plank, R. Kaufmann, J. Kastner, C. Kottler, A. Neels - Laminate fibre structure characterisation of carbon fibre-reinforced polymers by X-ray scatter dark field imaging with a grating interferometer… more
2013
J. Charwat-Pessler, M. Musso, K. Entacher, B. Plank, P. Schuller-Götzburg, S. Tangl, A. Petutschnigg - Improving CT Image Analysis of Augmented Bone with Raman Spectroscopy - Journal of Applied Mathematics,… more
2013
B. Plank, F. Ellert, J. Gruber, C. Gusenbauer, J. Kastner - Detection of defects in carbon fiber reinforced polymers by means of visual inspection, ultrasonic testing, digital radiography, active thermography… more
2013
J. Kastner, B. Plank, D. Salaberger - High resolution X-ray computed tomography for quantitative characterization of fiber reinforced polymers and heterogeneous light metals - Proceeding ASNT 22nd Annual… more
2013
W. Witteveen, K. Sherif, K. Puchner - FATIGUE BASED TOPOLOGY OPTIMIZATION OF LARGE AND FLEXIBLE MULTIBODY DYNAMIC SYSTEMS - Proceedings of NAFEMS World Congress 2013, Salzburg, Austria, 2013 more
2013
W. Witteveen - COMPARISON OF MODAL AND NON-MODAL MODEL REDUCTION APPROACHES FROM A MECHANICAL APPLICATION ENGINEER’S PERSPECTIVE - Proceedings of NAFEMS World Congress 2013, Salzburg, Austria, 2013 more
2013
K. Gaubinger, M. Rabl - Relaunch Activities in Product and Program Management in Handbook Product Relaunch - Springer, 2013, pp. 1-24 more
2013
P. Zeller, M. Rabl - Development of a fully automated test bed for the lifetime study of lithium batteries - Proceedings FFH 2013, Dornbirn, Austria, 2013, pp. 5 more
2013
R. Mesquita, R. Schneider, K. Steineder, L. Samek, E. Arenholz - On the Austenite Stability of a New Quality of Twinning Induced Plasticity Steel, Exploring New Ranges of Mn and C - METALLURGICAL AND MATERIALS… more
2013
S. Hofer, K. Steineder, R. Schneider, M. Hartl, E. Arenholz, L. Samek - Effect of annealing parameters on microstructure and mechanical properties of phosphorus alloyed 16%Mn-TWIP steel - International… more
2012
K. Steineder, R. Schneider - Comparing investigation on hardness-toughness-relationship of 51CrV4, ~74NiCr2 and 100Cr6 due to different short-cycle heat treaments - HK 2012 - 68. HärtereiKongress, Proceedings,… more
2013
S. Hutterer - Simulation und Optimierung der Systemintegration Ladegesteuerter E-Fahrzeuge (Poster) - Smart Grids Week 2013, Salzburg, Austria, 2013 more
2013
S. Hutterer, S. Vonolfen, M. Affenzeller - Genetic Programming Enabled Evolution of Control Policies for Dynamic Stochastic Optimal Power Flow - Companion Publication of the 2013 Genetic and Evolutionary… more
2009
G. Grabmair, R. Gahleitner - Modellbasierte nichtlineare Regelungsentwicklung mit vision-based-control für industrielle SPS-Systeme - 3. Research Forum of the Austrian Universities of Applied Science,… more
2013
D. Hofinger, H. Weinzierl, M. Jungwirth - SIMULATION ASSISTED DESIGN OF INDUCTORS IN POWER ELECTRONICS SYSTEMS - Proceedings of the 15th International Conference on Harbor, Maritime & Multimodal Logistics… more
2013
B. Purgleitner (Edlinger), C. Burgstaller, G. Schaffler, C. Kneidinger - A novel capillary slit die for investigations on abrasive wear - Proceedings of epf 2013 European Polymer Federation, Pisa, Italy,… more
2013
C. Kneidinger, G. Zitzenbacher, J. Miethlinger, G. Steinbichler - New approach in the characterization of the melting process in single screw plasticizing units using a model experiment - PPS 29 Proceedings,… more
2013
B. Purgleitner (Edlinger), C. Kneidinger, C. Burgstaller, G. Schaffler - INVESTIGATIONS ON ABRASIVE WEAR IN A NOVEL INJECTION MOLDING CAPILLARY SLIT DIE - PPS 29 Proceedings, Nürnberg (Deutschland) /… more
2013
C. Kneidinger, G. Zitzenbacher, J. Miethlinger, G. Steinbichler - A NEW MODEL EXPERIMENT TO CHARACTERIZE THE MELTING PROZESS IN SINGLE SCREW EXTRUDERS - Advances in Polymer Science and Technology (APST)… more
2013
B. Purgleitner (Edlinger), C. Burgstaller, C. Kneidinger, G. Schaffler - INVESTIGATIONS ON ABRASIVE WEAR OF FILLED PP COMPOUNDS WITH A NOVEL CAPILLARY SLIT DIE - Advances in Polymer Science and Technology… more
2013
A. Amirkhanov, C. Heinzl, J. Kastner, E. Gröller - Fuzzy CT Metrology: Dimensional Measurements on Uncertain Data - SCCG Proceedings (Digital Library), Smolenice castle, Slovakia, Slovakia, 2013, pp.… more
2011
R. Höller, G. Maier, S. Dönmez - Status and Prospects of Concentrating Solar Power in Turkey - SolarPACES Annual Conference, Granada, Spain, 2011 more
2003
R. Höller, K. Ito, S. Tohno, M. Kasahara - Wavelength dependent aerosol single-scattering albedo: Measurements and model calculations for a coastal site near the Sea of Japan - JOURNAL OF GEOPHYSICAL… more
2003
T. Yabe, R. Höller, S. Tohno, M. Kasahara - An aerosol climatology at Kyoto: Observed local radiative forcing and columnar optical properties - JOURNAL OF APPLIED METEOROLOGY, Vol. 42, No. 1, 2003, pp.… more
2011
C. Forsich, D. Heim, T. Müller, A. Gebeshuber - Duplex a-C:H:Si coatings of inner surfaces by means of DC-PACVD - 54th Annual Technical Conference Proceedings54th Annual Society of Vacuum Coaters Technical… more
2012
D. Heim, C. Forsich, T. Müller - Deposition of thick a-C:H:Si coatings for tribological applications - 55th Annual Technical Conference Proceedings, Santa Clara, United States of America, 2012 more
2013
T. Eidenberger, M. Selg, K. Krennhuber - Inhibition of dipeptidyl peptidase activity by flavonol glycosides of guava (Psidium guajava L.): A key to the beneficial effects of guava in type II diabetes mellitus… more
2013
K. Eisenhuber, K. Krennhuber, V. Steinmüller, A. Jäger - Comparison of Different Pre-treatment Methods for Separating Hemicellulose from Straw During Lignocellulose Bioethanol Production - Energy Procedia… more
2013
M. Kretschmer, M. Moser - Success factors for the sustainable cooperation of companies with design agencies - Proceedings FFH 2013, Dornbirn, Austria, 2013, pp. 263-265 more
2012
J. Hieslmair, G. Zauner - Camera based hand detection - Proceedings of 6th FFH 2012, Graz, Austria, 2012 more
2013
C. Kohlberger, G. Zauner - Texture Analysis of Zinc Coated Metal Surfaces - Proceedings FFH 2013, Dornbirn, Austria, 2013 more
2013
K. Eisenhuber, A. Jäger, H. Kahr, J. Wimberger - Comparison of different pretreatment methods for straw for lignocellulosic bioethanol production in Agronomy Research , 2013, pp. 173-182 more
2012
C. Rau, A. Neyer, K. Möslein - Innovation practices and their boundary-crossing mechanisms: a review and proposals for the future - TECHNOLOGY ANALYSIS & STRATEGIC MANAGEMENT, Vol. 24, No. 2, 2012, pp.… more
2012
K. Möslein, A. Neyer, C. Rau - Rumpelstiltskin is a thing of the past: innovation practices for creating service innovations in Methods in Service Innovations: Current Trends and Future Perspectives (Editors:… more
2012
C. Rau - Innovation practices: dissolving knowledge boundaries in innovation projects - Phd Thesis, Universität Erlangen-Nürnberg, Germany, 2012 more
2013
C. Hahn, E. Winterstein, I. Straumit, B. Plank, R. Hinterhölzl, S. Lomov, C. Binetruy - A SIMULATION APPROACH OF PERMEABILITY DETERMINATION USING COMPUTED TOMOGRAPHY SCANS - COMPOSITES WEEK @ LEUVEN AND… more
2013
H. C. Leindecker, H. Astecker - Comparison software energy performance certificate 2007-2011 - Proceedings of e-nova 2013, Pinkafeld, Austria, 2013, pp. 23-30 more
2013
H. C. Leindecker - Bio-Solar-House - Proceedings of e-nova 2013, Pinkafeld, Austria, 2013, pp. 431-436 more
2013
H. C. Leindecker, T. Schrag, E. Stocker, C. Wartha, E. Hasler - "Guidance" for quality assurance of buildings - greenbuilding, Vol. 2013, No. 5, 2013, pp. 21-27 more
2013
H. C. Leindecker, I. Dornigg - Criteria of Mobility for Sustainable Buildings - Proceedings of Sustainable Buildings Conference 2013, Graz, Austria, 2013, pp. 1207-1216 more
2013
H. C. Leindecker, S. Luger - High Performanc Buildings Quality Assessment - Proceedings of Sustainable Buildings Conference 2013, Graz, Austria, 2013, pp. 1217-1224 more
2013
D. Salaberger, S. Gleiß, J. Kastner - Comparison of methods to determine fibre length distribution: X-ray CT versus standard method - Int. Conf. Structural Analysis of Advanced Materials, Kos, Greece,… more
2013
M. Aigner, D. Salaberger - The influence of glass fibres on the longational viscosity studied by means of optical coherence tomography and X-ray computed tomography - PPS 29 Proceedings, Nürnberg (Deutschland)… more
2013
P. Lanzerstorfer, C. Krasel, O. Höglinger, J. Weghuber - Protein-protein interactions of the ß-adrenergic receptor and kinetic analysis of intracellular binding partners via µ-patterned surfaces - Protein-protein… more
2012
P. Lanzerstorfer, D. M. Borgmann, A. Steininger, S. Schaller, M. Brameshuber, S. Sunzenauer, O. Höglinger, J. Weghuber - Analysis of Protein-Protein Interactions in Live Cells - The Micropatterning Approach… more
2013
M. Egger - Flat belt tracking - ant Journal, Vol. 2, No. 2, 2013, pp. 10-13 more
2013
M. Egger - Dynamischer Böschungswinkel - bult solids handling, Vol. 19, No. 3, 2013, pp. 52-56 more
2012
P. Lanzerstorfer, S. Sunzenauer, M. Brameshuber, G. Schütz, S. Takahashi, M. Bünemann, O. Höglinger, J. Weghuber - Drug Screening on signal transduction proteins via µ-patterned surfaces - 56th Biophysical… more
2011
P. Lanzerstorfer, S. Sunzenauer, G. Schütz, M. Bünemann, S. Takahashi, O. Höglinger, J. Weghuber - Drug Screening on signal transduction proteins via µ-patterned surfaces - EMBO Meeting, Wien, Austria,… more
2013
S. Mayr, G. Grabmair - Shift shock suppression in hybrid powertrains for fun vehicles - Tag der Mechatronik 2013, Innsbruck, Austria, 2013 more
2013
G. Grabmair, V. Leitner, S. Mayr - Shift shock suppression in hybrid powertrains for fun vehicles - Proceedings FFH 2013, Dornbirn, Austria, 2013 more
2017
J. Weghuber - Studying protein-protein interactions (PPIs) of receptor tyrosine kinases on µ-patterned surfaces - ÖGMBT meeting 2013, Innsbruck, Austria, 2017 more
2013
O. Höglinger, A. Steininger, P. Lanzerstorfer, J. Weghuber - Biophysical and biochemical characterization of insulin-dependent cellular systems in response to secondary plant metabolites - Proceedings… more
2013
D. Gintner, O. Höglinger, J. Weghuber - Characterization of regulatory effects of fruit- and vegetable-juices on CYP450 gene expression levels - Proceedings FFH 2013, Dornbirn, Austria, 2013 more
2011
J. Weghuber - Studying protein-protein interactions (PPIs) of receptor tyrosine kinases on µ-patterned surfaces - EMBO Meeting, Wien, Austria, 2011 more
2013
M. Auer, K. Steineder, R. Schneider, M. Klein - Comparing investigation on the hardness-toughness relationship of the steels 42CrMo4, 51CrV4, 55Cr3 and 100Cr6 in the area of blue brittleness - Proceedings… more
2013
C. Heinzl, J. Kastner - Quantitative Inspection of Complex Composite Aeronautic Parts Using Advanced X‐ray Technique - Proceedings 3rd EASN Workshop on Aerostructures, Milan, Italy, 2013, pp. 5 more
2014
A. Amirkhanov, M. Reiter, J. Kastner, E. Gröller, C. Heinzl - Uncertainty in CT Metrology: Visualizations for Exploration and Analysis of Geometric Tolerances - Proceedings of Conference on Industrial… more
2014
C. Heinzl - Quantitative inspection of complex composite aeronautic parts using advanced X-ray techniques in Aeronautics and air transport research 7th Framework Programme 2007-2013 VOL 3 Project synopses,… more
2014
K. Nachbagauer - State of the art of ANCF elements regarding geometric description, interpolation strategies, definition of elastic forces, validation and the locking phenomenon in comparison with proposed… more
2013
K. Nachbagauer - Development of shear and cross section deformable beam finite elements applied to multibody dynamics problems - 2nd ECCOMAS YIC, Bordeaux, France, 2013, pp. 4 more
2013
A. Huskic, J. Giedenbacher, A. Huskic, B. Behrens - Tool Life Studies of Generatively Produced Forging Tools - Forging , Vol. 92013, No. 3, 2013, pp. 66-70 more
2013
A. Huskic, J. Giedenbacher, U. Pschebezin, N. Wild, Z. Simicevic - Direct Metal Laser Melting for Forming Tools - XXX. Colloquium on metal forming , Planneralm, Austria, 2013, pp. 23-28 more
2014
A. Huskic, B. Mehic, M. Kasper - Development of a heating system for a spiral-tribometer to investigate the influence of temperature in tribological systems - International Conference on Tribology in Manufacturing… more
2013
A. Reh, C. Gusenbauer, J. Kastner, E. Gröller, C. Heinzl - MObjects - A Novel Method for the Visualization and Interactive Exploration of Defects in Industrial XCT Data - IEEE Transactions on Visualization… more
2013
A. Reh, B. Plank, J. Kastner, E. Gröller, C. Heinzl - Advanced Visualization Methods for Porosity in Carbon Fiber Reinforced Polymers - 1st International Conference on Tomography of Materials and Structures… more
2013
F. Schweitzer, I. Gabriel - Implementation of Relaunch Activities in Handbook Product Relaunch - Springer, 2013, pp. 345-368 more
2013
F. Schweitzer, O. Gassmann - Managing the Unmanageable: The Fuzzy Front End of Innovation in Management of the Fuzzy Front End of Innovation - Springer Verlag, 2013, pp. 3-14 more
2013
F. Schweitzer - Integrating Customers at the Front End of Innovation in Management of the Fuzzy Front End of Innovation - Springer Verlag, 2013, pp. 31-48 more
2013
F. Schweitzer, W. Buchinger - Emporia: The Merits of Online Idea Competitions in Management of the Fuzzy Front End of Innovation - Springer Verlag, 2013, pp. 221-226 more
2013
K. Gaubinger, F. Schweitzer, H. Kirchweger - voestalpine Anarbeitung: Commercialization Framework for Technology Development Project in Management of the Fuzzy Front End of Innovation - Springer Verlag,… more
2013
O. Gassmann, F. Schweitzer - Fuzzy Front End of Innovation: Quo Vadis? in Management of the Fuzzy Front End of Innovation - Springer Verlag, 2013, pp. 301-310 more
2013
F. Schweitzer, O. Gassmann, K. Gaubinger - The Role of Open Innovation in Dynamic Environments in Open Innovation Research, Management and Practice, Series on Technology Management, 2013 more
2012
V. Strobl, N. Dickinger, R. Schneider - "The Faster the Better"-Wärmebehandlung von Warmarbeitsstählen - HTM J. Heat Treatment Material, Vol. 67, No. 2, 2012, pp. 91-94 more
2013
A. Paar, R. Schneider, P. Zeller, G. Reiter, S. Paul, P. Würzinger, I. Stiller - Influence of the Polarity on the Cleanliness Level and the Inclusion Types in the ESR Process - Proceedings of the 2013… more
2013
K. Gaubinger, M. Rabl - Structuring the Front End of Innovation in Management of the Fuzzy Front End of Innovation - Springer Verlag, 2013, pp. 15-30 more
2013
D. Eser, K. Gaubinger, M. Rabl - Sprint Radar: Community-Based Trend Identification in Management of the Fuzzy Front End of Innovation - Springer Verlag, 2013, pp. 275-280 more
2013
S. Hutterer, M. Affenzeller - Policy Function Approximation for Optimal Power Flow Control Issues - Proceedings of the The International Workshop on Simulation for Energy, Sustainable Development & Environment,… more
2008
R. Schneider, R. Grunwald, D. Vaught - Induction hardening and tempering behavior of X153CrMoV12 (~D2) cold work tool steel - Proceedings of the 17th IFHTSE Congress, Kobe, Japan, 2008, pp. 93-96 more
2013
J. D. Hallewell Haslwanter, G. Fitzpatrick - The Development of a sensor-based System for older People - HCI 2013 - The Internet of Things, Brunel University, London, United Kingdom of Great Britain and… more
2013
D. Salaberger, S. Oberpeilsteiner, J. Kastner, T. Koch, M. Palmstingl - Modelling of damage mechanisms of short fibre reinforced polymers using X-ray CT - Conference Materials Testing 2013, Neu-Ulm, Germany,… more
2013
A. Jäger, H. Kahr - Bioethanol production in a lignocellulosic biorefinery - 3rd World Congress of Bioenergy (WCBE-2013) , nanjing, China, 2013, pp. 375-572 more
2013
H. Kahr, A. Jäger, D. Steindl - The effect of Water Reduction during Steam Explosion - 3rd World Congress of Bioenergy (WCBE-2013) , nanjing, China, 2013, pp. 437-438 more
2013
H. Kahr, J. Wimberger, D. Schürz, A. Jäger - Evaluation of the Biomass Potential for the Production of Lignocellulosic Bioethanol from Various Agricultural Residues in Austria and Worldwide - Energy… more
2013
F. Perteneder, S. Hahnwald, M. Haller, K. Gaubinger - Systematic Integration of Solution Elements: How Does Digital Creativity Support Change Group Dynamics? - Proceedings of the 14th IFIP TC13 Conference… more
2013
M. Lindorfer, C. Backfrieder, C. Kieslich, J. Kroesche, G. Ostermayer - Environmental-sensitive Generation of Street Networks for Traffic Simulations - Proc. of the 7th European Symposium on Computer Modeling… more
2013
M. Längauer, G. Zitzenbacher, C. Kneidinger, K. Liu - Influences of the geometry of pellets and solids-conveying zone in PP-single screw extrusion on processing conditions and output - Advances in Polymer… more
2013
V. Steinmueller, J. Falkner, A. Jäger - DEVELOPMENT OF AN INNOVATIVE AND INEXPENSIVE BIOLOGICAL METHANE POTENTIAL EVALUATION SYSTEM - Proceedings 21st EU BC&E, Kopenhagen, Denmark, 2013 more
2013
V. Steinmueller - Reduction of agricultural lifecylce-emissions – an ecological assessment of different manure management systems - Proceedings CAPE 2013, Graz, Austria, 2013 more
2013
V. Steinmueller, K. Eisenhuber, D. Steindl, H. Kahr, A. Jäger - Biogaspotential of steam exploded wheat straw with special regard to the mass loss - Proceedings 9. Minisymposium Process Engineering, Leoben,… more
2013
R. Schneider - Developing the world of tooling - International Heat Treatment and Surface Engineering, Vol. 7, No. 3, 2013, pp. 99-100 more
2014
G. Zauner, M. Schagerl - Machine vision based quality inspection of flat glass products - SPIE Electronic Imaging 2014, San Francisco, United States of America, 2014 more
2013
R. Schneider - Proceedings of the 30th ASMET Heat Treatment Conference, 2013, pp. 1-98 more
2013
G. Mayr, G. Hendorfer, K. Gresslehner, J. Suchan, J. Sekelja - Anwendung der Homogenisierungstheorie bei der quantitativen Prüfung von porösen kohlenstofffaserverstärkten Kunststoffen mit Pulsthermographie… more
2013
J. Suchan, J. Sekelja, K. Gresslehner, G. Hendorfer, G. Mayr - 3D Modellierung der Pulsthermographie an porösen kohlenstofffaserverstärkten Kunststoffen - Thermographie-Kolloquium Berichtsband, Stuttgart,… more
2013
O. Höglinger, C. Schäfer, k. schröder, M. Schäfer - Acetaminophen changes intestinal epithelial cell membrane properties, subsequently affecting absorption processes - CELLULAR PHYSIOLOGY AND BIOCHEMISTRY,… more
2014
C. Lanzerstorfer - Physical and Flow Properties of Fly Ash from Biomass Combustion. in Fly Ash: Sources, Applications and Potential Environments Impacts (Contributions to Book: Part/Chapter/Section 3),… more
2014
C. Lanzerstorfer, Q. Xu - New Developments in Top Gas Cleaning of Blast Furnaces: a Review. - Journal of Mining, Metallurgical, Materials, Geotechnical, and Plant Engineering, Vol. 159, No. 3, 2014, pp.… more
2013
T. Miklós; Moser, Gerhard; Rösch, Sebastian, G. Grabmair - Anatomic Parameters of the Long Process of Incus for Stapes Surgery - Otology Neurotology, Vol. 34, No. 9, 2013 more
2013
C. Rau, A. Schipanski, A. Neyer - A long way home: How a corporate innovation community overcomes its political boundaries - 3th Annual Conference of the European Academy of Management (EURAM): EURAM Proceedings… more
2014
S. Rotter, S. Brunner, E. Pitzer, S. Hutterer, C. Rohrhofer - Designing Trans-European Logistics Networks for Biogenic Residues-based Energy Carrier Production - Proceedings 4th Central European Biomass… more
2014
P. Lanzerstorfer, J. Wruss, S. Huemer, A. Steininger, U. Müller, M. Himmelsbach, D. M. Borgmann, S. M. Winkler, O. Höglinger, J. Weghuber - Bioanalytical Characterization of Apple Juice from 88 Grafted… more
2014
K. Schiefermayr - The Polya-Chebotarev problem and inverse polynomial images - ACTA MATHEMATICA HUNGARICA, Vol. 142, No. 1, 2014, pp. 80-94 more
2013
T. Schlagradl, R. Schneider, G. Posch, R. Schnitzer - Investigation of the hardness-toughness-relationship of a welded joint after different heat-treatment cycles - Welding in the World, Vol. 57, No. 1,… more
2013
M. Aigner, R. Schneider, E. Arenholz, L. Samek - Evolution and formation of microstructures of structural steels with higher Mn-contents - Proceedings of the XX Int. Students Day of Metallurgy, Chrakow,… more
2014
M. Reiter, D. Weiss, C. Gusenbauer, J. Kastner, M. Erler, S. Kasperl - Evaluation of a histogram based image quality measure for X-ray computed tomography - Proceedings of Conference on Industrial Computed… more
2013
C. Endtmayer, R. Edlinger, L. Schlossinger, M. Zauner, W. Rokitansky - Autonomous robot for dunging with ActiveSensFusionControl - Proceedings FFH 2013, Dornbirn, Austria, 2013 more
2013
M. Egger, C. Pillichshammer - dynamic flowability - 18. Conference on bulk solid handling, Magdeburg, Germany, 2013, pp. 243-256 more
2013
R. Schnitzer, R. Rauch, W. Ernst, J. Wagner, S. Baumgartner, M. Leitner, M. Stoschka, T. Schlagradl, R. Schneider, C. Bernhard - Comprehensive investigations of new filler materials for welding of high… more
2012
B. Eichinger, R. Schneider, G. Rabler, C. Walch - Characterization of the wear behavior during cutting of a HCT980C steel - Proceedings of the 19th International Student's Day of Metallurgy, Freiberg,… more
2012
R. Schneider, B. Eichinger, G. Rabler, C. Walch - Investigation of the wear behaviour of different tool steels and heat treatment conditions for the cutting of a HCT980C advanced high strength steel -… more
2013
M. Zauner, R. Edlinger, W. Rokitansky - RRTLAN - A real-time Robot Communication Protocol Stack with Multi Threading Option - IEEE International Symposium on Safety, Security, and Rescue Robotics (SSRR),… more
2013
R. Edlinger, M. Zauner, W. Rokitansky - INTELLIGENT MOBILITY - New Approach of Robot Mobility Systems for Rescue Scenarios - IEEE International Symposium on Safety, Security, and Rescue Robotics (SSRR),… more
2013
R. Zykaite, C. Burgstaller, B. Riedl, W. Stadlbauer - Comparison of Interfacial Shear Strength chraracterised using Fibre Debond and mechanical Testing in Polypropylene Basalt Fiber Composites - Advances… more
2013
C. Burgstaller, B. Riedl, W. Stadlbauer - Influence of Compatibilizer Type on the Properies of PE-PA6-Blends - Advances in Polymer Science and Technology (APST) 3, Linz, Austria, 2013, pp. 58 more
2013
C. Burgstaller, B. Riedl, W. Stadlbauer - The Influence of Compatibilizer Type and Concentration on the Properties of Immiscible Polymer Blends - ANTEC 2013, Las Vegas, United States of America, 2013,… more
2014
H. C. Leindecker, S. Luger - Thermal comfort and occupant satisfaction in the residential home for the elderly - 16th International FM & REM Congress Kufstein, Kufstein, Austria, 2014 more
2014
S. Senck, C. Gusenbauer, M. Frelat, G. McGlynn, G. Weber, J. Kastner - Covariation between shape and bone microstructure in the proximal tibia in humans - Proceedings of Conference on Industrial Computed… more
2014
B. Plank, S. Senck, C. Fürst, H. Scharleitner, J. Kastner - Qualitative and quantitative analysis of the process chain: Wood polymer composite – C-template – C/Si/SiC-ceramic by means of X-ray computed… more
2014
S. Senck, D. Salaberger, M. Kastner, A. Fuchsbauer, J. Kastner - Microbial Electrolysis Cells: three-dimensional characterization of bacterial biofilm by means of high-resolution X-ray computed tomography… more
2014
B. Plank, C. Fürst, S. Senck, J. Kastner - Analysis by means of X-ray computed tomography: From wood-plastic composite via carbon templates to C / Si / SiC ceramics - German Society for Non-Destructive… more
2014
S. Senck, M. Coquerelle, G. Weber, S. Hofstaetter, J. Kastner - Estimation of microstructural parameters in the proximal tibia by means of shape regression: combining high resolution X-ray computed tomography… more
2017
T. Ortner, R. Kränzl-Nagl, H. Kahr - The Acceptance of Biofuels and Bioethanol - Results of an Opinion Poll - 12th Conference on sustainable development of Energy, Water and Environment systems, Dubrovnik,… more
2013
S. Wohlfarth, T. Schulte, J. P. Guggenbichler, M. Lackner, R. Mayr, K. Schilcher, G. Zauner - Antimicrobial effect on polymer surfaces by integrated metal oxides and metal coating - Annual Meeting of the… more
2007
N. Kaneyasu, Y. Igarashi, Y. Sawa, H. Takahashi, H. Tada, H. Kumata, R. Höller - Chemical and optical properties of 2003 Siberian forest fire smoke observed at the summit of Mt. Fuji, Japan - JOURNAL… more
2005
R. Höller, G. Banko, C. Spanring, K. Steinnocher - Application of remote sensing data for sustainable spatial development - RAUM, Vol. 60, No. 1, 2005, pp. 41-43 more
2002
M. Kasahara, R. Höller, S. Tohno, Y. Onishi, C. Ma - Application of PIXE technique to studies on global warming/cooling effect of atmospheric aerosols - NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH… more
2002
R. Höller, M. Kasahara, S. Tohno, R. Hitzenberger - Long-term characterization of carbonaceous aerosol at Uji, Japan - ATMOSPHERIC ENVIRONMENT, Vol. 36, No. 1, 2002, pp. 1267-1275 more
2001
C. Ma, M. Kasahara, R. Höller, T. Kamiya - Characterization of single particles and bulk aerosol samples in Japan during the Asian-dust storm period - ATMOSPHERIC ENVIRONMENT, Vol. 35, No. 1, 2001, pp.… more
2000
R. Höller, M. Kasahara, H. Horvath - Aerosol single-scattering albedo determined by horizontal extinction closure - Journal of Aerosol Research, Japan, Vol. 15, No. 3, 2000, pp. 246-255 more
2000
R. Höller, M. Kasahara, S. Tohno, H. Horvath - Aerosol single-scattering albedo and its relation to black carbon concentration at urban and coastal locations in Japan - JOURNAL OF AEROSOL SCIENCE, Vol.… more
2004
R. Höller, A. Higurashi, K. Aoki, H. Fukushima - Remote sensing of large-scale boreal forest fire aerosol in Eastern Asia from ADEOS-2/GLI during spring 2003 - Proceedings of SPIE, Vol. 5571, No. 1, 2004,… more
2003
R. Höller, T. Nakajima, H. Murakami, T. Nakajima, T. Iguchi - New results from ADEOS-II/GLI - Proceedings of SPIE, Vol. 5234, No. 1, 2003, pp. 517-524 more
2005
F. Seidel, J. Nieke, D. Schläpfer, R. Höller, W. von Hoyningen-Huene, K. Itten - Aerosol retrieval for APEX airborne imaging spectrometer: a preliminary analysis - Proceedings of SPIE, Vol. 5979, No.… more
2003
R. Höller, J. Nieke, H. Murakami, K. Aoki, I. Asanuma, M. Hori - GLI vicarious calibration using selected ocean and snow ground sites - Proceedings of SPIE, Vol. 4892, No. 1, 2003 more
2014
W. Schützenhöfer, A. Tazreiter, B. Plank, P. Schumacher - Determination of cleanliness different special steels comparison of different methods - Proceedings of Conference on Industrial Computed Tomography… more
2014
V. Revol, B. Plank, C. Kottler, J. Kastner, R. Kaufmann, A. Dommann, A. Neels - Laminate fibre structure characterisation by orientation-selective X-ray grating interferometry - Proceedings of Conference… more
2014
D. Kiefel, R. Stössel, B. Plank, C. Heinzl, J. Kastner - CFRP porosity characterization using µ-Computed Tomography with optimized test parameters supported by XCT-simulation - Proceedings of Conference… more
2014
J. Charwat-Pessler, B. Plank, G. Kain, W. Stefanie, T. Gruenewald, G. Standfest, A. Petutschnigg - Application of X – ray micro computed tomography on wood and wood based composites - Proceedings of… more
2014
J. Weissenböck, A. Amirkhanov, W. Li, A. Reh, A. Amirkhanov, E. Gröller, J. Kastner, C. Heinzl - FiberScout: An Interactive Tool for Exploring and Analyzing Fiber Reinforced Polymers - Pacific Visualization… more
2014
J. Weissenböck, M. Arikan, D. Salaberger, C. Heinzl, J. Kastner - Quantitative Measurement and Visualization of Fiber Orientation and Length Distribution of Glass-, Carbon- and Cellulose Fiber Reinforced… more
2014
A. Wendelken, F. Danzinger, C. Rau, K. Möslein - Innovation without me: why employees do (not) participate in organizational innovation communities - R&D Management, Vol. 44, No. 2, 2014, pp. 217-236 more
2014
S. Oberpeilsteiner, T. Reiter, D. Salaberger - Coupling of in-situ-CT with Virtual Testing by FEM of Short Fiber Reinforced Materials - Proceedings of Conference on Industrial Computed Tomography (iCT2014),… more
2014
C. Lanzerstorfer, M. Kröppl - Air classification of blast furnace dust collected in a fabric filter for recycling to the sinter process. - RESOURCES, CONSERVATION AND RECYCLING, Vol. 86, No. 1, 2014,… more
2014
P. Lanzerstorfer, S. Takahashi, O. Höglinger, J. Wruss - A Live Cell Tirf-Microscopy Based Screening Assay for Fast Analysis of Receptor Tyrosine Kinase Modulators - BIOPHYSICAL JOURNAL, Vol. 106, No.… more
2014
V. Stadlbauer, P. Lanzerstorfer, D. M. Borgmann, J. Wruss, K. Schröder, S. M. Winkler, O. Höglinger, J. Weghuber - Total Internal Reflection Fluorescence (TIRF) Microscopy Guided Quantification of GLUT4… more
2014
W. Witteveen, F. Pichler - Efficient Model Order Reduction for the Dynamics of Nonlinear Multilayer Sheet Structures with Trial Vector Derivatives - SHOCK AND VIBRATION, Vol. 2014, No. 913136, 2014 more
2014
W. Witteveen, F. Pichler - Efficient model order reduction for the nonlinear dynamics of jointed structures by the use of trial vector derivatives - Dynamic of Coupled Structures, Volume 1, Orlando, United… more
2014
K. Sherif, W. Witteveen - Deformation Mode Selection and Orthonormalization for an Efficient Simulation of the Rolling Contact Problem - Dynamic of Coupled Structures, Volume 1, Orlando, United States… more
2014
M. Breitfuss, W. Witteveen - DEIM for the Efficient Computation of Nonlinear Interface Stresses - Dynamic of Coupled Structures, Volume 1, Orlando, United States of America, 2014, pp. 435-447 more
2014
F. Pichler, W. Witteveen - Efficient reduction method based on trial vector derivatives for nonlinear transient analysis of multilayer sheet structures - PAMM Vol. 14, Erlangen, Germany, 2014 more
2015
C. Lanzerstorfer - Investigation of the contamination of a fly ash sample during sample preparation by air classification. - INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY, Vol. 12, No.… more
2014
M. Mülleder, R. Schneider, C. Schüller, P. Zeller, S. Paul, G. Reiter, P. Würzinger - Influence of frequency on the energy consumption and polarisation effects during electro-slag-remelting - Proceedings… more
2014
C. Schüller, R. Schneider, M. Mülleder, P. Zeller, S. Paul, G. Reiter, P. Würzinger - Effects of increased MgO and SiO2-contents in the slag on energy consumption and polarisation at the ESR-process… more
2014
G. Zenz, K. Nachbagauer, J. Gerstmayr, M. SHIH, Y. YANG - Identification of System Properties in a Square Frame: Numerical and Experimental Investigations - International Journal of Structural Stability… more
2014
K. Nachbagauer, S. Oberpeilsteiner, K. Sherif, W. Steiner - The Use of the Adjoint Method for Solving Typical Optimization Problems in Mulitbody Dynamics - Journal of computational and nonlinear dynamics,… more
2014
G. Hanis, B. Stadlmann, G. Barbu, F. Kaiser - SATLOC - GNSS based train protection for low traffic lines - Rail Signalling and Telecommunication, Vol. 2014, No. 4, 2014, pp. 49-53 more
2014
K. Steineder, R. Schneider, D. Krizan, C. Béal, C. Sommitsch - Microstructural evolution in 0.1%C5%Mn steel after intercritical annealing depending on temperature and cooling rate - Proceedings of European… more
2014
A. Winkler, G. Grabmair - Design and implementation of a path planning for a high-dynamic handling system - Proceedings of the Austrian Robotics Workshop 2014, Linz, Austria, 2014, pp. 69-75 more
2014
H. Zoch, R. Schneider, T. Lübben - Proc. of the Europ. Conf. in Heat Treatment and 21st IFHTSE Congress, 2014 more
2014
S. Oberpeilsteiner, T. Reiter, D. Salaberger - Modelling of short fiber reinforced materials for evaluation of effective material data - Proceedings FFH 2014, Kufstein, Austria, 2014, pp. 5 more
2014
S. Oberpeilsteiner, W. Steiner - Evaluation of the adjoint sensitivity analysis for the identification of multibody system parameters - PAMM Vol. 14, Erlangen, Germany, 2014 more
2011
T. Fuchs, G. Pöckl, J. Mittmannsgruber, R. Schneider - Nitriding of powder-metallurgical produced high-alloyed plastic mould steels - HTM J. Heat Treatment Material, Vol. 66, No. 2, 2011, pp. 87-93 more
2011
R. Schneider, R. Mesquita - Advances in tool steels and their heat treatment – Part 2: Hot Work Tool Steels and Plastic Mould Steels - International Heat Treatment and Surface Engineering, Vol. 5, No.… more
2014
F. Schweitzer, O. Gassmann, C. Rau - Lessons from Ideation: Where Does User Involvement Lead Us? - Creativity and Innovation Management, Vol. 23, No. 2, 2014, pp. 155-167 more
2010
R. Mesquita, R. Schneider - Tool steel quality and surface finishing of plastic molds - Exakt, Vol. 8, No. 3, 2010, pp. 307-318 more
2011
R. Schneider, R. Grunwald, C. Schüller - Microstructural Changes during Short-cycle Heat Treatment of Cold Work Tool Steels - Int. J. of Microstructure and Material Properties , Vol. 6, No. 6, 2011,… more
2014
C. Rau, F. Schweitzer, O. Gassmann - Technology-Reflective Individuals for Sustainable Innovations - Proceedings of the XXV ISPIM Conference, 8.-11. June, Dublin, Dublin, Ireland, 2014 more
2012
A. Wendelken, F. Danzinger, C. Rau, K. Möslein - Innovation Without Me - Why employees do (not) participate in organizational innovation communities - Procceedings of the 2012 R&D Management Conference,… more
2014
H. C. Leindecker, I. Dornigg, C. Hofmann - Ecological and economical evaluation of different building constructions - Proceedings FFH 2014, Kufstein, Austria, 2014, pp. 52-56 more
2014
H. C. Leindecker, S. Luger, E. Sumereder - Thermotechnical performance of masonry (Dynamic U-value) - Proceedings FFH 2014, Kufstein, Austria, 2014, pp. 57-61 more
2014
H. C. Leindecker - Occupant satisfaction: Thermal well-being - mold problems - Proceedings of Thermografie Forum Eugendorf 2014, Eugendorf, Austria, 2014, pp. 18 more
2014
M. Rabl, K. Gaubinger - The impact of the organizational implementation of innovation management on reducing uncertainty in innovation - Proceedings FFH 2014, Kufstein, Austria, 2014, pp. 9 more
2014
D. Salaberger, M. Arikan, T. Paier, J. Kastner - Characterization of damage mechanisms in glass fiber reinforced polymers using X-ray computed tomography - Proceedings of ECCM 16 European Conference on… more
2014
M. Aigner, D. Salaberger - Determining the orientation, distribution and concentration of glass fibers in polymer matrix studied by means of X-ray computed tomography and optical coherence tomography -… more
2014
M. Jerabek, D. Salaberger, M. Reiter, Z. Major - Prediction of fiber orientation in short glass fiber polypropylene composites and the consequences for micromechanical simulations - Proceedings of ECCM… more
2014
P. Brandtner, K. Gaubinger, A. Auinger, M. Helfert, M. Rabl - Dealing with Uncertainty in Innovation Management - Proceedings of XXV ISPIM Conference - Innovation for Sustainable Economy and Society (June… more
2014
P. Brandtner, M. Helfert, A. Auinger, K. Gaubinger - Applicability of Focus Groups in a Design Science Project - Electronic proceedings ADWI - 2014, Friedrichshafen, Germany, 2014, pp. 12 more
2015
C. Lanzerstorfer, Q. Xu, R. Neuhold - Leaching of the residue from the dry off-gas de-dusting and desulphurization process of an iron ore sinter plant - INTERNATIONAL JOURNAL OF MINERALS, METALLURGY AND… more
2014
S. Mayr, S. Hutterer, R. Silye, G. Zauner, K. Schilcher - Analysis of human cardiomuscular tissue by means of high resolution microscopy - Advances in Single-Molecule Research for Biology & Nanoscience,… more
2014
C. Lanzerstorfer - Chemical and physical characterization of cyclone fly ashes from five grate-fired biomass combustion plants. - CARPATHIAN JOURNAL OF EARTH AND ENVIRONMENTAL SCIENCES, Vol. 9, No. 4,… more
2014
W. Witteveen, C. Wagner, P. Jachs, S. Froschauer, H. Schöffl - Pilot study on the non-invasive detectability of femoral neck fractures with frequency response functions - World Journal of Mechanics, Vol.… more
2014
W. Steiner - The use of Castigliano’s theorem in Coulomb friction problems - ACTA MECHANICA, Vol. 225, No. 9, 2014, pp. 2471-2483 more
2014
G. Mayr, B. Plank, J. Gruber, J. Sekelja, G. Hendorfer - Thermal diffusivity measurements of porous CFRP specimens with different number of plies using pulsed thermography in transmission and reflection… more
2014
A. Auinger, P. Brandtner, T. Fischer, M. Helfert, K. Gaubinger - Innovation Management Support Tools – a Comparative Analysis Focusing on Open Innovation. - Proceedings of Academy of World Business,… more
2014
H. Andreas, M. Reitberger, J. Lesslhumer, B. Plank, U. Müller - Wood polymer composites versus thermally treated wood versus wood: cyclic testing - European Journal of Wood and Wood Products, Vol. 72,… more
2014
C. Kneidinger, G. Zitzenbacher, M. Längauer, K. Liu, J. Miethlinger, G. Steinbichler - CHARACTERIZING THE MELTING BEHAVIOR OF DIFFERENT SHAPED POLYMER BULK SOLIDS BY UTILIZING A MODEL EXPERIMENT WITH… more
2014
B. Purgleitner (Edlinger), C. Burgstaller, C. Kneidinger - ABRASIVE WEAR BEHAVIOR OF DIFFERENT FILLERS IN PP MEASURED BY MEANS OF A NOVEL INJECTION MOLDING WEAR APPARATUS - Proceedings of ANTEC 2014,… more
2014
K. Steineder, R. Schneider, D. Krizan, C. Béal, C. Sommitsch - Microstructural evolution of two low-carbon steels with a medium manganese content - Proceedings of 2nd HMnS Conference, Aachen, Germany,… more
2014
K. Gaubinger, M. Rabl, S. Swan, T. Werani - Innovation and Product Management - Springer Verlag, 2014, pp. 1-327 more
2014
G. Grabmair, S. Mayr, e. al - Model Based Control Design -- a Free Tool-Chain in ecc14, 2014 more
2014
R. Schneider, M. Rahofer, K. Steineder, L. Samek, C. Commenda, E. Arenholz - Metallographic investigation of Medium-Mn-Steels - Special editions of Practical Metallography 46, Leoben, Austria, 2014, pp.… more
2014
G. Zitzenbacher, T. Bayer, Z. Huang, A. Giesbrecht - Influence of tool surface on wall sliding of polymer melts - PMI 2014, Guimarães, Portugal, Portugal, 2014, pp. 237-241 more
2013
K. Liu, G. Zitzenbacher, M. Längauer, C. Kneidinger - Influence of pellet shape on the external coefficient of friction of polypropylene and on the mass flow rate of a single screw extruder - PPS 29 Proceedings,… more
2014
G. K. Kronberger, E. Pitzer, S. Hutterer, S. Brunner - Simulation-based optimization of biomass-logistics - Proceedings FFH 2014, Kufstein, Austria, 2014 more
2014
O. Höglinger, J. Weghuber - The substance behind "an apple a day" - The World of Food Ingredients, Vol. 2, No. 2, 2014 more
2014
P. Lanzerstorfer, V. Stadlbauer, D. M. Borgmann, J. Wruss, K. Schröder, S. M. Winkler, O. Höglinger, J. Weghuber - Identification of Novel Insulin Mimetic Drugs by Quantitative TIRF Microscopy - Biophysical… more
2014
P. Lanzerstorfer, V. Stadlbauer, L. Chtcheglova, R. Haselgrübler, D. M. Borgmann, J. Wruss, P. Hinterdorfer, K. Schröder, S. M. Winkler, O. Höglinger, J. Weghuber - Identification of novel insulin mimetic… more
2014
U. Müller, P. Lanzerstorfer, A. Arnold, E. Sevcsik, G. Kreindl, O. Höglinger, G. Schütz, J. Weghuber - Characterization of various pattern designs for micro-contact printing based protein-protein interaction… more
2014
B. Stotter, K. Gresslehner, G. Mayr, G. Hendorfer, J. Sekelja - Quantitative application of pulse phase thermography to determine material parameters - Proceedings of 12th Quantitative InfraRed Thermography… more
2013
G. Löckinger, E. Chiocchetti, N. Ralli, I. Stanizzi, V. Lusicky, T. Wissik, B. Heinisch-Obermoser - Guidelines for collaborative legal / administrative terminology work in Guidelines for collaborative… more
2013
G. Löckinger - Translation-Oriented Terminography. New and Modified Data Categories for ISOcat - eDITion – Terminology Journal, Vol. 9, No. 2, 2013, pp. 20-25 more
2014
G. Löckinger - Translation-Oriented Special Language Dictionaries. Developing and Testing an Innovative Model - Frank & Timme. Verlag für wissenschaftliche Literatur, 2014 more
2014
G. Löckinger - Translation-Oriented Special Language Dictionaries of the Future - Rights, Return, Resources. Economic Aspects of Terminology Management, Mannheim, Germany, 2014, pp. 89-96 more
2015
G. Löckinger, G. Budin, H. Kockaert - Intensional definitions in Handbook of Terminology. Volume I (Editors: H. J. Kockaert, F. Steurs) - John Benjamins Publishing Company, 2015, pp. 60-81 more
2014
K. Nachbagauer, K. Sherif - FreeDyn – A Multibody Simulation Research Code - Proceedings of the 11th World Congress on Computational Mechanics (WCCM) and the 5th European Conference on Computational… more
2014
K. Nachbagauer, S. Oberpeilsteiner, W. Steiner - The adjoint method for solving typical optimization problems in multibody dynamics - Proceedings of the 3rd Joint International Conference on Multibody… more
2014
B. Plank, G. Mayr, A. Reh, D. Kiefel, R. Stössel, J. Kastner - Evaluation and Visualisation of Shape Factors in Dependence of the Void Content within CFRP by Means of X-ray Computed Tomography - Proceedings… more
2014
D. Salaberger, J. Kastner, M. Arikan, T. Paier - Characterization of damage mechanisms in glass fibre reinforced polymers using X-ray computed tomography - Proceedings of 11th European Conference on Non-Destructive… more
2014
K. Liu, G. Zitzenbacher, M. Längauer, C. Kneidinger - Influence of pellet shape on the external coefficient of friction of polypropylene and on the mass flow rate of a single screw extruder in PROCEEDINGS… more
2014
J. Kastner, S. Zaunschirm, G. Requena, S. Baumgartner, H. Pinto - 3D-microstructure characterization of thermomecanically treated Mg-alloys by high resolution X-ray computed tomography - Proceedings of… more
2014
J. Kastner - Proceedings ICT2014 - Proceedings ICT2014, Wels, Austria, 2014 more
2014
J. Kastner - Characteristics of Research at University of Applied Sciences in 20 years University of Applied Sciences in Austria - Facultas, 2014 more
2014
F. Nachtrab, M. Firsching, N. Uhlmann, C. Speier, P. Takman, T. Tuohimaa, C. Heinzl, J. Kastner, D. Larsson, A. Holmberg, G. Berti, C. Sauerwein, M. Krumm - NanoXCT: development of a laboratory nano-CT… more
2014
M. Sedlmair, C. Heinzl, S. Bruckner, H. Piringer, T. Möller - Visual Parameter Space Analysis: A Conceptual Framework - IEEE Transactions on Visualization and Computer Graphics (TVCG), Vol. 20, No. 12,… more
2014
A. Amirkhanov, S. Bruckner, C. Heinzl, E. Gröller - The Haunted Swamps of Heuristics: Uncertainty in Problem Solving in Scientific Visualization (Contributions to Book: Part/Chapter/Section 5), - Springer,… more
2014
C. Heinzl, S. Bruckner, E. Gröller - Guest editorial—Uncertainty and parameter space analysis in visualization - COMPUTERS & GRAPHICS, Vol. 41, No. 1, 2014, pp. 1-2 more
2015
C. Heinzl - Making X-Ray Nano-Tomography Accessible with a Stand-Alone Device - AAAS Annual Meeting 2015, San Jose, CA, United States of America, 2015 more
2014
M. Pointner, P. Kuttner, T. Obrlik, A. Jäger, H. Kahr - Composition of corncobs as a substrate for the fermentation of biofuels - Agronomy Research, Vol. 12, No. 2, 2014, pp. 391-396 more
2014
M. Tutt , T. Kikas, H. Kahr, M. Pointner, P. Kuttner, J. Olt - Using steam explosion pretreatment method for bioethanol production from floodplain meadow hay - Agronomy Research, Vol. 12, No. 2, 2014,… more
2014
V. Leitner, K. Krennhuber, A. Jäger, H. Kahr, P. Kuttner - Analysis of optimal fermentation temperature for on-farm biogas production of dairy manure - Proceedings ot the 22nd European Biomass Conference… more
2014
M. Längauer, G. Zitzenbacher, C. Kneidinger, K. Liu - Influence of Solid Bulk Properties and Frictional Behavior on Solids Conveying in Single Screw Extruders - 6th International Conference on Polymer… more
2014
C. Kneidinger, C. Kneidinger, G. Zitzenbacher, K. Liu - Investigation of the melting behavior of different shaped polymeric bulk solids - 6th International Conference on Polymer Behaviour, Wien, Austria,… more
2015
M. Längauer, G. Zitzenbacher, K. Liu, C. Kneidinger, G. Schaffler, B. Purgleitner (Edlinger) - Experimental Analysis of the Influence of Pellet Shape on Single Screw Extrusion - JOURNAL OF APPLIED POLYMER… more
2014
G. Grabmair, S. Mayr, e. al - Model Based Control Design -- a Free Tool-Chain - Proc. of ECC 14, Straßburg, France, 2014 more
2014
R. S. E. Schneider - Austenitic Nitriding and Nitrocarburizing of steels in Thermochemical Surface Engineering of Steels (Editors: E. J. Mittemeijer, M. A. J. Somers), 2014, pp. 373-391 more
2014
R. Schneider - Surface hardening of cold work tool steels as an energy efficient alternative to furnace heat treatment - Proc. of the 2nd Int. Conf. on Energy and the Future of Heat Treatment and Surface… more
2014
F. Schweitzer, C. Rau, E. van den Hende - The Role of Technical Reflectiveness and Narrative Transportation in Ideation - Proceedings of the XXV ISPIM Conference, 8.-11. June, Dublin, Dublin, Ireland,… more
2014
F. Schweitzer, C. Rau, E. van den Hende - How can users contribute to radical innovation? - Proceedings of the 21st International Product Development Management Conference , Limerick, Ireland, 2014 more
2013
F. Schweitzer - Market research in the process of new product development. in Gupta, Praveen; Trusko, Brett E.: Global Innovation Science Handbook, Mcgraw-Hill Publ.Comp - M. Dekker Verlag, 2013 more
2014
C. Rau, F. Schweitzer, O. Gassmann - Open Foresight Workshops for Opportunity Identification in Open Innovation: New Product Development Essentials from the PDMA (Editors: Charles Noble, Serdar Durmusogla,… more
2014
J. Weissenböck, A. Reh, D. Salaberger, C. Heinzl, J. Kastner - Advanced Visualization and Exploration Techniques for Fiber Reinforced Polymers - Proceedings of 11th European Conference on Non-Destructive… more
2014
C. Heinzl, J. Weissenböck, A. Reh, J. Kastner, T. Dierig, T. Günther, D. Kiefel, R. Stössel - Software tools for robust extraction, analysis and visualization of porosities in XCT scans of fiber-reinforced… more
2014
M. Reiter, C. Kuhn, D. Weiss, M. Erler, S. Kasperl, S. Schröpfer - CT-Wizard - Automatic determination of optimal CT measuring parameters for an unknown part - Proceedings of 11th European Conference… more
2015
K. Schiefermayr - Zolotarev's conformal mapping and Chebotarev's problem - INTEGRAL TRANSFORMS AND SPECIAL FUNCTIONS, Vol. 26, No. 2, 2015, pp. 118-133 more
2014
R. Mesquita, R. Schneider - Introduction to Heat Treating of Tool Steels in Heat Treating of Irons and Steels Vol 4D, 2014, pp. 277-287 more
2014
R. Schneider, R. Mesquita, H. Altena, T. Müller, P. Seemann - Processes and Furnaces Equipment for Heat Treating of Tool Steels in Heat Treating of Irons and Steels Vol 4D, 2014, pp. 288-299 more
2014
R. Schneider, R. Mesquita, W. Schützenhöfer - Distortion in tool Steels in Heat Treating of Irons and Steels Vol 4D, 2014, pp. 300-311 more
2014
R. Mesquita, R. Schneider, C. Sales Goncalves - Heat Treating of Cold-Work Tool Steels - Medium-Alloy air Hardening, High Carbon High Chromium and High Vanadium-Powder Metallurgy Steels in Heat Treating… more
2014
R. Mesquita, R. Schneider, C. Sales Goncalves - Heat Treating of Hot-Work Tool Steels in Heat Treating of Irons and Steels Vol 4D, 2014, pp. 336-346 more
2014
R. Mesquita, R. Schneider, C. Sales Goncalves - Heat Treating of High-Speed Tool Steels in Heat Treating of Irons and Steels Vol 4D, 2014, pp. 347-357 more
2014
R. Mesquita, R. Schneider, C. Sales Goncalves - Heat Treating of Mold Steels and Corrosion-resistant Tool Steels in Heat Treating of Irons and Steels Vol 4D, 2014, pp. 358-362 more
2015
D. Zindel, A. Butcher, S. Al-Sabah, P. Lanzerstorfer, J. Weghuber, A. Tobin, M. Bünemann, C. Krasel - Engineered Hyperphosphorylation of the β2-adrenoceptor Prolongs Arrestin-3 Binding and Induces Arrestin… more
2014
H. C. Leindecker, I. Dornigg - User contentment in sustainable buildings - Sustainable Buildings, Pinkafeld, Austria, 2014, pp. 171-177 more
2014
P. Lanzerstorfer, U. Müller, M. Bünemann, G. Kreindl, C. Krasel, S. Takahashi, O. Höglinger, J. Weghuber - Micro-structured surfaces as a superior tool for the quantitative analysis of protein-protein… more
2014
T. Eidenberger, M. Selg, S. Fürst, K. Krennhuber - In-Vitro Inhibition of Human Lipase PS by Polyphenols From Kiwi Fruit - Journal of Food Research, Vol. 3, No. 4, 2014, pp. 71-77 more
2014
G. Löckinger - Analytical dictionary of globalization and labour – Dictionnaire analytique de la mondialisation et du travail – Diccionario analítico de la mundialización y del trabajo (DAMT) [dictionary… more
2015
C. Lanzerstorfer - Application of air classification for improved recycling of sinter plant dust - RESOURCES, CONSERVATION AND RECYCLING, Vol. 94, No. 1, 2015, pp. 66-71 more
2015
C. Lanzerstorfer, B. Bamberger-Straßmayr, K. Pilz - Recycling of blast furnace dust in the iron ore sintering process: investigation of coke breeze substitution and the influence on off-gas emissions… more
2014
S. Mayr, G. Grabmair - Trajectory generation with rich information content - PAMM Vol. 14, Erlangen, Germany, 2014, pp. 917-918 more
2014
J. Gruber, K. Gresslehner, J. Sekelja, G. Mayr, G. Hendorfer - Signal to Noise Ratio Threshold in Active Thermography - Proceedings 6th International symposium for NDT in Aerospace, Madrid, Spain, 2014,… more
2014
H. Graf, B. Stadlmann - Automated Internet-Shopping Terminals for Self-Service Pick-Ups - International Conference on Industrial Logistics (ICIL 2014), Bol, Croatia, 2014, pp. 82-88 more
2015
K. Schiefermayr - The degenerating behavior of Jacobi's theta functions - INTEGRAL TRANSFORMS AND SPECIAL FUNCTIONS, Vol. 26, No. 3, 2015, pp. 226-228 more
2015
S. Senck, B. Plank, J. Kastner, F. Ramadani, K. Trieb, S. Hofstaetter - Visualization of local cortical defects in Charcot foot using microcomputed tomography - The orthopaedist, Vol. 44, No. 1, 2015,… more
2014
C. Chimani, R. Kretz, C. Angermeier, C. Gusenbauer - Investigations on Microstructure Effect of Changing Fluid Flow Characteristic in High Pressure Die Casting - MATERIALS SCIENCE FORUM, Vol. 782, No.… more
2014
C. Gusenbauer, M. Reiter, J. Kastner, G. Klösch - Detection of non-metallic inclusions in steel by X-ray computed tomography and after fatigue testing - Proceedings of 11th European Conference on Non-Destructive… more
2014
M. Egger, K. Decker - Stress Ratio - Schüttgutfördertechnik, München, Germany, 2014 more
2014
M. Egger - Lateral belt running - Belt conveyors, Essen, Germany, 2014 more
2014
K. Mathmann, M. Kuhn, J. Engstle, P. Först, H. Briesen - Three-Dimensional Image Analysis of Filter Cakes in the Brewing Process - Trends in Brewing, Ghent, Belgium, 2014 more
2015
J. Kastner, B. Plank, D. Salaberger - Application of CT for the characterization of light-weight materials and components - 7 Landshuter Lightweight-Confernce, Landhut, Germany, 2015 more
2014
A. Paar, R. Schneider, P. Zeller, G. Reiter, S. Paul, P. Würzinger - Effect of electrical parameters on type and content of non-metallic inclusions after electro-slag-remelting - steel research international,… more
2015
S. Mayr, G. Grabmair, J. Reger - Input design and parameter estimation with open source tools - Proceedings MATHMOD Conference 2015, Wien, Austria, 2015, pp. 6 more
2015
K. Steineder, R. Schneider, D. Krizan, C. Béal, C. Sommitsch - Investigation on the microstructural evolution in a Medium-Mn steel (X10Mn5) after intercritical annealing - HTM Journal of Heat Treatment… more
2015
H. C. Leindecker, I. Dornigg - User satisfaction and thermal comfort in buildings - Proceedings 9th conference for Austrian universities of applied sciences, Hagenberg, Austria, 2015, pp. 1-7 more
2015
H. C. Leindecker - Energy concept for a riding school and energy recovery of horse dung - Proceedings of the 9th conference for Austrian universities of applied sciences, Hagenberg, Austria, 2015, pp.… more
2015
K. Liu, W. Stadlbauer, G. Zitzenbacher, C. Paulik, C. Burgstaller - Talc-filled Polypropylene with Innovative Performance through Improved Interfaces in 4a Technologietage 2015 - Leichtbau und Composites,… more
2015
P. Brandtner, A. Auinger, K. Gaubinger, M. Rabl - Handling Uncertainty in Innovation Management – an empirical analysis of innovative organizations - Proceedings 9th conference for Austrian universities… more
2015
P. Brandtner, M. Helfert, A. Auinger, K. Gaubinger - Multi-Criteria Selection in Design Science Projects – A Procedure for Selecting Foresight Methods at the Front End of Innovation - Proceedings of… more
2015
C. Lanzerstorfer - Cyclone fly ash from a grate-fired biomass combustion plant: dependence of the concentration of various components on the particle size - FUEL PROCESSING TECHNOLOGY, Vol. 131, No. 1,… more
2015
M. Jungwirth, D. Hofinger, A. Eder - Model Based Design of Inductive Components - A Comparision between Measurement and Simulation - Lecture Notes in Computer Science LNCS 9520, Las Palmas, Gran Canaria,… more
2014
C. Forsich, D. Heim, C. Dipolt, T. Müller, A. Gebeshuber, R. Holecek, C. Lugmair - Potential of Thick a-C:H:Si films as substitute for chromium plating - SURFACE & COATINGS TECHNOLOGY, Vol. 241, No. 1,… more
2015
M. Mühlberger, M. Rohn, J. Danzberger, E. Sonntag, A. Rank, L. Schumm, R. Kirchner, C. Forsich, S. Gorb, B. Einwögerer, E. Trappl, D. Heim, H. Schift, I. Bergmair - UV-NIL fabricated bio-inspired inlays… more
2014
G. Zitzenbacher, K. Liu, C. Forsich, D. Heim - Wear Resistance of Thick Diamond Like Carbon Coatings Against Polymeric Materials Used in Single Screw Plasticizing Technology - 30th International Conference… more
2015
R. Schneider, C. Schüller, P. Würzinger, G. Reiter, C. Martinez - Effect of a Higher SiO2-Content in the Slag for the Remelting of a Hot-Work Tool Steel on the ESR-Process - Journal of Mining, Metallurgical,… more
2015
M. Affenzeller, A. Beham, S. Vonolfen, E. Pitzer, S. M. Winkler, S. Hutterer, M. Kommenda, M. Kofler, G. K. Kronberger, S. Wagner - Simulation-Based Optimization with HeuristicLab in Applied Simulation… more
2015
C. Lanzerstorfer, R. Neuhold - Residues from single-stage dry de-dusting and desulphurization of sinter plant off-gas: enabling partial recirculation by classification. - INTERNATIONAL JOURNAL OF ENVIRONMENTAL… more
2015
S. Kleindel, D. Salaberger, C. Hochenauer - Measurement and Numerical Simulation of Void and Warpage in Glass Fiber Reinforced Molded Chunky Parts - INTERNATIONAL POLYMER PROCESSING, Vol. 30, No. 1, 2015,… more
2015
G. Grabmair, S. Mayr - Embedded Adaptive STC Control Development by a Free Toolchain - Proceedings 9th conference for Austrian universities of applied sciences, Hagenberg, Austria, 2015, pp. 4 more