Faculty

Research Group Computed Tomography

We engage in problems of the industry concerning defect detection and quality assureance of materials and components using industrial computed tomography (CT).

Computed tomography is the only method with which it is possible to look inside materials an components without influencing their further use or changing their shape - nondestructively. The inner structures are reconstructed and virtually illustrated without damaging the samples.

The research group "Computed Tomography" at the Wels Campus is part of the University of Applied Sciences Upper Austria and was established in 2004. Meanwhile the department with its 12 employees and several student apprentices has grown in size over the years and become one of the biggest reserach group within the university.
2020
M. Gärtner , B. Reitinger, W. Haderer, B. Plank, J. Kastner, J. Gruber, G. Mayr, J. Vicki, P. Burgholzer, E. Scherleitner - Automated Laser Ultrasonic NDT of Carbon Fibre Reinforced Polymer Parts - 12th International Symposium on NDT in Aerospace (2020), Williamsburg, Virgina, United States of America,… more
2020
A. Khudiakova, M. Berer, S. Niedermair, B. Plank, E. Truszkiewicz, G. Meier, H. Stepanovsky, M. Wolfahrt, G. Pinter, J. Lackner - Systematic analysis of the mechanical anisotropy of fibre-reinforced polymer specimens produced by laser sintering - Additive Manufacturing, 2020 more
2019
J. Maurer, C. Hannesschläger, B. Plank, J. Kastner - Damage characterisation of short glass fibre reinforced polyamide with different fibre content by an interrupted in-situ X-Ray computed tomography test - Digital Industrial Radiology and Computed Tomography, Fürth, Germany, 2019 more
2019
J. Maurer, D. Salaberger, M. Jerabek, J. Kastner - Characterization of the microstructure of injection moulded fibre reinforced thermoplastics using high resolution X-ray computed tomography - DACH-Jahrestagung 2019, Friedrichshafen, Germany, 2019 more
2019
M. Bahman, M. Awang , P. Bokam, B. Plank, C. Heinzl, K. Siow - Finite element modeling of nano porous sintered silver material using computed tomography images - MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, Vol. 50, No. 5, 2019, pp. 533-538 more
2018
J. Kastner, C. Heinzl - X-Ray Tomography in Handbook of Advanced Non-Destructive Evaluation (Editors: Ida N., Meyendorf N.) - Springer Gabler, 2018, pp. 1-72 more
2018
J. Kastner, C. Heinzl, J. Glinz - X-ray computed tomography for applications in industry and materials science - Proceedings of the 57th Annual British Conference on Non-Destructive Testing, Nottingham, UK, United Kingdom of Great Britain and Northern Ireland, 2018, pp. 1-12 more
2018
J. Kastner, C. Gusenbauer, B. Plank, J. Glinz, S. Senck - Challenges for grating interferometer X-ray computed tomography for practical applications in industry - Proceedings of the 12th European Conference on Non-destructive Testing, Göteborg, Sweden, 2018 more
2018
J. Ecker , C. Fürst, C. Unterweger, B. Plank, H. Andreas - 3D computed tomography as Quality Control Tool in Advanced Composite Manufacturing - Proceedings of the 8th Conference on Industrial Computed Tomography, Wels, Austria (iCT 2018), Wels, Austria, 2018, pp. 7 more
2018
C. Gusenbauer, M. Reiter, B. Plank, D. Salaberger, S. Senck, J. Kastner - Porosity determination of carbon and glass fibre reinforced polymers using phase-contrast imaging - JOURNAL OF NONDESTRUCTIVE EVALUATION, Vol. 10921, No. 4, 2018, pp. 1-10 more
2018
K. Bugelnig, H. Germann, T. Steffens, B. Plank, F. Wilde, E. Boller, G. Requena - Optimized Segmentation of the 3D Microstructure in Cast Al-Si Piston Alloys - Practical Metallography, Vol. 55, No. 4, 2018, pp. 223-243 more
2017
G. Mayr, J. Gruber, T. Schedlberger, C. Gusenbauer, G. Hendorfer - Beurteilung von belastungsbedingten Schädigungszuständen in CFK mit Spannungskonzentrationen mithilfe der Puls-Thermographie - Proceedings Thermographie-Kolloquium 2017, Berlin, Germany, 2017, pp. 9 more
2017
B. Plank, D. Salaberger, G. Rao, A. Amirkhanov, J. Kastner - 4D X-ray computed tomography by using conventional laboratory CTs: possibilities and limitations - DGZfP- Annual Conference 2017, Koblenz, Germany, 2017, pp. 9 more
2017
W. Schützenhöfer, C. Decker, B. Plank, E. Plesiutschnig - ALTERNATIVE METHODS FOR DETERMINING MICROCLEANLINESS: A STUDY BASED ON HOT WORK TOOL STEELS - IFM 2017 – 20th International Forgemasters Meeting 2017, Graz, Austria, 2017, pp. 10 more
2016
J. Weissenböck, A. Bhattacharya, B. Plank, C. Heinzl, J. Kastner - Visual classification of braided and woven fiber bundles in X-ray computed tomography scanned carbon fiber reinforced polymer specimens - Case Studies in Nondestructive Testing and Evaluation, Vol. 6, No. 3, 2016, pp. 39-46 more
2016
K. Mathmann, H. Zauner, C. Heinzl, J. Kastner - Multi-Modal Imaging as a Promising Approach to the Understanding of Wheat-Dough Microstructures - 6th Conference on Industrial Computed Tomography, Wels, Austria, 2016, pp. 162-163 more
2016
S. Breitwieser, K. Greßlehner, B. Plank, G. Hendorfer - Failure detection in commercial thermoelectric modules using infrared thermography - Proceedings of 6th World Sustainable Energy Forum (WSEF2016), Vienna, Austria, 2016, pp. 9 more
2016
G. Rao, B. Plank, C. Heinzl, J. Kastner - Quantitative evaluation of induced porosity reference samples implemented by drill hole in CFRP using XCT and various segmentation parameters - ECCM17 - 17th European Conference on Composite Materials, Munich, Germany, 2016, pp. 1-11 more
2016
A. Amirkhanov, A. Amirkhanov, D. Salaberger, J. Kastner, E. Gröller, C. Heinzl - Visual Analysis of Defects in Glass Fiber Reinforced Polymers for 4DCT Interrupted In situ Tests - COMPUTER GRAPHICS FORUM, Vol. 35, No. 3, 2016, pp. 201-210 more
2016
J. Weissenböck, A. Amirkhanov, E. Gröller, J. Kastner, C. Heinzl - PorosityAnalyzer: Visual Analysis and Evaluation of Segmentation Pipelines to Determine the Porosity in Fiber-Reinforced Polymers - IEEE Conference on Visual Analytics Science and Technology (IEEE VAST 2016), Baltimore, United States… more
2016
W. Schützenhöfer, C. Decker, B. Plank, E. Plesiutschnig - EVALUATION OF ALTERNATIVE MICROCLEANLINESS METHODS - Proceedings of 10th International TOOL Conference (TOOL 2016), Bratislava, Slovakia, 2016, pp. 10 more
2016
A. Bhattacharya, J. Weissenböck, R. Wenger, A. Amirkhanov, J. Kastner, C. Heinzl - Interactive Exploration and Visualization using MetaTracts extracted from Carbon Fiber Reinforced Composites - IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS, Vol. 23, No. 8, 2016, pp. 1988-2002 more
2016
B. Fröhler, T. Möller, C. Heinzl - GEMSe: Visualization-Guided Exploration of Multi-channel Segmentation Algorithms - COMPUTER GRAPHICS FORUM, Vol. 35, No. 3, 2016, pp. 191-200 more
2016
S. Breitwieser, K. Greßlehner, B. Plank, G. Hendorfer - Failure detection in commercial thermoelectric modules using infrared thermography - Conference Book of Austrian Physical Society (ÖPG-Meeting 2016), Vienna, Austria, 2016, pp. 261-262 more
2016
C. Margherita , T. Sahra , K. Wiltschke-Schrotta, S. Senck, G. Oxilia, R. Sorrentino, G. Mancuso, G. Gruppioni, R. Lindner, J. Hublin, S. Benazzi - A reassessment of the presumed Torrener Bärenhöhle's Paleolithic human tooth - JOURNAL OF HUMAN EVOLUTION, Vol. 93, No. 1, 2016, pp. 120-125 more
2015
C. Heinzl, J. Kastner, M. Firsching, F. Nachtrab, N. Uhlmann, P. Takman, A. Holmberg, M. Krumm, C. Sauerwein, D. Lichau, P. Doux - Laboratory X-ray tomography for non-destructive testing of specimens and materials at the nanoscale - Proceedings: Digital Industrial Radiology and Computed Tomography (DIR… more
2015
H. Zauner, J. Kastner, D. Salaberger, C. Heinzl - 3D image processing for single fibre characterization by means of XCT - Acta Stereologica, Vol. 1, No. 1, 2015 more
2015
J. Kastner, B. Plank, C. Heinzl - Advanced X-ray computed tomography methods: High resolution CT, phase contrast CT, quantitative CT and 4DCT - Proceedings: Digital Industrial Radiology and Computed Tomography (DIR 2015), Ghent, Belgium, 2015, pp. 13 more
2015
A. Bhattacharya, C. Heinzl, A. Amirkhanov, J. Kastner, R. Wenger - MetaTracts - A method for robust extraction and visualization of carbon fiber bundles in fiber reinforced composites - Pacific Visualization Symposium (PacificVis), 2015 IEEE, Hangzhou, China, China, 2015, pp. 191-198 more
2015
F. Nachtrab, T. Hofmann, C. Speier, M. Firsching, N. Uhlmann, P. Takman, C. Heinzl, A. Holmberg, M. Krumm, C. Sauerwein - Development of a Timepix based detector for the NanoXCT project - Journal of Instrumentation, Vol. 10, No. 11, 2015 more
2015
H. Zauner, J. Kastner, C. Heinzl - Multimodal Registration and Fusion of Industrial CT Data - Proceedings: Digital Industrial Radiology and Computed Tomography (DIR 2015), Ghent, Belgium, 2015 more
2015
C. Heinzl - The QUICOM project - Overview and current state - Proceedings of 5th EASN Workshop on Aeronautic Structures, Manchester, Austria, 2015 more
2015
B. Fröhler, A. Amirkhanov, J. Kastner, E. Gröller, C. Heinzl - Multimodal Visualization and Analysis of Spectral and Scalar Data - Proceedings of the 9th conference for Austrian universities of applied sciences, Hagenberg, Austria, 2015, pp. 7 more
2015
C. Heinzl - Making X-Ray Nano-Tomography Accessible with a Stand-Alone Device - AAAS Annual Meeting 2015, San Jose, CA, United States of America, 2015 more
2015
J. Kastner, S. Senck, C. Gusenbauer, B. Plank, C. Hannesschläger, H. Zauner, C. Heinzl, A. Sasov - Three-dimensional characterization of fibre-reinforced polymers using a Talbot-Lau grating interferometer μ-CT und data fusion methods - XNPIG 2015 3rd Meeting of X-Ray and Neutron Phase Imaging with… more
2015
J. Kastner, C. Heinzl - X-ray computed tomography for non-destructive testing and materials characterization in Integrated Imaging and Vision Techniques for Industrial Inspection (Editors: Z.Liu, H. Ukida, P. Ramuhalli, K. Niel) - Springer Gabler, 2015 more
2015
A. Reh, A. Amirkhanov, C. Heinzl, J. Kastner, E. Gröller - Fuzzy feature tracking: Visual analysis of industrial 4D-XCT data - COMPUTERS & GRAPHICS, Vol. 3, No. 1, 2015, pp. 177-184 more
2014
J. Weissenböck, A. Reh, D. Salaberger, C. Heinzl, J. Kastner - Advanced Visualization and Exploration Techniques for Fiber Reinforced Polymers - Proceedings of 11th European Conference on Non-Destructive Testing (ECNDT 2014), Prague, Czech Republic, 2014 more
2014
A. Amirkhanov, S. Bruckner, C. Heinzl, E. Gröller - The Haunted Swamps of Heuristics: Uncertainty in Problem Solving in Scientific Visualization (Contributions to Book: Part/Chapter/Section 5), - Springer Gabler, 2014, pp. 51-60 more
2014
A. Amirkhanov, B. Fröhler, J. Kastner, E. Gröller, C. Heinzl - InSpectr: Multi-Modal Exploration, Visualization, and Analysis of Spectral Data - COMPUTER GRAPHICS FORUM, Vol. 33, No. 3, 2014, pp. 91-100 more
2014
D. Kiefel, R. Stössel, B. Plank, C. Heinzl, J. Kastner - CFRP porosity characterization using µ-Computed Tomography with optimized test parameters supported by XCT-simulation - Proceedings of Conference on Industrial Computed Tomography (iCT2014), Wels, Austria, 2014, pp. 35-43 more
2014
M. Sedlmair, C. Heinzl, S. Bruckner, H. Piringer, T. Möller - Visual Parameter Space Analysis: A Conceptual Framework - IEEE Transactions on Visualization and Computer Graphics (TVCG), Vol. 20, No. 12, 2014, pp. 2161-2170 more
2014
J. Weissenböck, M. Arikan, D. Salaberger, C. Heinzl, J. Kastner - Quantitative Measurement and Visualization of Fiber Orientation and Length Distribution of Glass-, Carbon- and Cellulose Fiber Reinforced Polymers using X-Ray Computed Tomography - German Society for Non-Destructive Testing, Potsdam,… more
2014
A. Amirkhanov, M. Reiter, J. Kastner, E. Gröller, C. Heinzl - Uncertainty in CT Metrology: Visualizations for Exploration and Analysis of Geometric Tolerances - Proceedings of Conference on Industrial Computed Tomography (iCT2014), Wels, Austria, 2014, pp. 189-196 more
2014
C. Heinzl, S. Bruckner, E. Gröller - Guest editorial—Uncertainty and parameter space analysis in visualization - COMPUTERS & GRAPHICS, Vol. 41, No. 1, 2014, pp. 1-2 more
2014
F. Nachtrab, M. Firsching, N. Uhlmann, C. Speier, P. Takman, T. Tuohimaa, C. Heinzl, J. Kastner, D. Larsson, A. Holmberg, G. Berti, C. Sauerwein, M. Krumm - NanoXCT: development of a laboratory nano-CT system - PROCEEDINGS OF SPIE VOLUME 9212, San Diego, California, United States, United States of America,… more
2014
J. Weissenböck, A. Amirkhanov, W. Li, A. Reh, A. Amirkhanov, E. Gröller, J. Kastner, C. Heinzl - FiberScout: An Interactive Tool for Exploring and Analyzing Fiber Reinforced Polymers - Pacific Visualization Symposium (PacificVis), 2014 IEEE, Yokohama, Japan, 2014, pp. 153-160 more
2013
A. Amirkhanov, C. Heinzl, J. Kastner, E. Gröller - Fuzzy CT Metrology: Dimensional Measurements on Uncertain Data - SCCG Proceedings (Digital Library), Smolenice castle, Slovakia, Slovakia, 2013, pp. 8 more
2013
A. Reh, B. Plank, J. Kastner, E. Gröller, C. Heinzl - Advanced Visualization Methods for Porosity in Carbon Fiber Reinforced Polymers - 1st International Conference on Tomography of Materials and Structures (ICTMS 2013), Ghent, Belgium, 2013, pp. 4 more
2013
A. Reh, C. Gusenbauer, J. Kastner, E. Gröller, C. Heinzl - MObjects - A Novel Method for the Visualization and Interactive Exploration of Defects in Industrial XCT Data - IEEE Transactions on Visualization and Computer Graphics (TVCG), Vol. 19, No. 12, 2013, pp. 2906-2915 more
2013
C. Heinzl, J. Kastner - Quantitative Inspection of Complex Composite Aeronautic Parts Using Advanced X‐ray Technique - Proceedings 3rd EASN Workshop on Aerostructures, Milan, Italy, 2013, pp. 5 more
2012
M. Reiter, M. Krumm, S. Kasperl, C. Kuhn, D. Weiss, M. Erler, C. Gusenbauer, C. Heinzl, J. Kastner - Evaluation of transmission based image quality optimisation for X-ray computed tomography - Conference on Industrial Computed Tomography, Wels, Austria, 2012, pp. 241-250 more
2012
A. Reh, B. Plank, J. Kastner, E. Gröller, C. Heinzl - Porosity Maps - Interactive Exploration and Visual Analysis of Porosity in Carbon Fiber Reinforced Polymers - COMPUTER GRAPHICS FORUM, Vol. 31, No. 3, 2012, pp. 1185-1194 more
2012
A. Amirkhanov, M. Reiter, J. Kastner, E. Gröller, C. Heinzl - Evaluation of Projection-Based Metal-Artifact Reduction for Multi-Material Components - Conference on Industrial Computed Tomography, Wels, Austria, 2012, pp. 279-287 more
2012
C. Heinzl, J. Kastner, A. Amirkhanov, E. Gröller, C. Gusenbauer - Optimal Specimen Placement in Cone Beam X-ray Computed Tomography - NDT & E INTERNATIONAL, Vol. 99, No. 99, 2012, pp. 1-25 more
2012
H. Qureshi, M. Malik, M. Anas Ahmad, C. Heinzl - Benchmarking of De-noising Techniques for Streaking Artifacts in Industrial 3DXCT Scan Data - 20-th International Conference in Central Europe on Computer Graphics, Visualization and Computer Vision 2012, Pilzen, Tschechische Republik, Czech Republic,… more
2012
J. Kastner, D. Salaberger, B. Plank, A. Reh, C. Heinzl - Advanced X-ray tomographic methods for quantitative characterisation of carbon fibre reinforced polymers - Proceedings 4th International symposium on NDT in Aerospace, Augsburg, Germany, 2012 more
2011
C. Heinzl, J. Kastner, A. Amirkhanov, E. Gröller, M. Reiter - Fast Estimation of Optimal Specimen Placements in 3D X-ray Computed Tomography - International Symposium on Digital Industrial Radiology and Computed Tomography 2011, Berlin, Germany, 2011 more
2011
M. Reiter, B. Harrer, D. Salaberger, C. Heinzl, C. Gusenbauer, C. Kuhn, J. Kastner - Simulation aided study for optimising device parameters of an industrial X-ray computed tomography system for non-destructive testing and materials characterisation - International Symposium on Digital Industrial Radiology… more
2011
A. Amirkhanov, C. Heinzl, M. Reiter, J. Kastner, E. Gröller - Projection-Based Metal-Artifact Reduction for Industrial 3D X-ray Computed Tomography - IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS, Vol. 17, No. 12, 2011, pp. 2193-2202 more
2010
M. Reiter, C. Heinzl, D. Salaberger, D. Weiss, J. Kastner - Simulative Parameteroptimierung für Metrologie an Multi-Materialbauteilen mit industrieller Röntgen Computertomografie - Proceedings Industrial Computed Tomography Symposium 2010, Wels, Austria, 2010, pp. 163-173 more
2010
C. Heinzl, J. Kastner, E. Gröller - Uncertainty Visualization of Computed Tomography Datasets from Industrial Components - Proc. of 10th European Conference on Non-Destructive Testing, Moskau, Russian Federation, 2010 more
2010
C. Heinzl, A. Amirkhanov, M. Reiter, E. Gröller - Visual Optimality and Stability Analysis of 3DCT Scan Positions - IEEE Transactions on Visualization and Computer Graphics (TVCG), Vol. 16, No. 6, 2010 more
2010
M. Reiter, C. Heinzl, D. Salaberger, D. Weiss, J. Kastner - Study on parameter variation of an industrial computed tomography simulation tool concerning dimensional measurement deviations - Proc. of 10th European Conference on Non-Destructive Testing, Moskau, Russian Federation, 2010 more
2010
C. Heinzl, M. Reiter, J. Kastner, E. Gröller - Artefaktreduktion mittels Dual Viewing für Röntgencomputertomographie von Multimaterialbauteilen - DGZFP Yearly Conference 2010, Erfurt, Germany, 2010 more
2010
C. Heinzl, M. M. Malik, E. Gröller - Comparative Visualization for Parameter Studies of Dataset Series - IEEE Transactions on Visualization and Computer Graphics (TVCG), Vol. 16, No. 5, 2010, pp. 829-840 more
2009
J. Kastner, C. Heinzl - Genauigkeitsoptimierung der Röntgen-Computertomographie für die Geometriebestimmung und Visualisierung der Messunsicherheit - Proceedings DGZfP annual conference 2009, Münster, Germany, 2009, pp. 8 more
2009
C. Heinzl, J. Kastner, E. Gröller - Application of Statistical Analysis for Uncertainty Visualization of Computed Tomography Data from Multi Material Components - Denver X-Ray Conference 2009, Denver, United States of America, 2009, pp. 8 more
2009
C. Heinzl, J. Kastner, E. Gröller - Computed tomography of multi-material components and evaluation using statistical analysis - Proceedings FFH 2009, Villach, Austria, 2009, pp. 8 more
2009
M. M. Malik, C. Heinzl, E. Gröller - Computation and Visualization of Fabrication Artifacts - Journal of WSCG, Vol. 17, No. 1, 2009, pp. 17-24 more
2009
M. Reiter, M. M. Malik, C. Heinzl, D. Salaberger, E. Gröller, H. Lettenbauer, J. Kastner - Improvement of X-Ray image acquisition using a GPU based 3DCT simulation tool - Proccedings of 8th International Conference for Quality Control by Artificial Vision, Wels, Austria, 2009 more
2009
C. Heinzl - Analysis and visualization of industrial CT data - Phd Thesis, Technische Universität Wien, Institut für Computergraphik und Algorithmen, Austria, 2009, pp. 110 more
2008
C. Heinzl, J. Kastner, T. Möller, E. Gröller - Statistical analysis of Multi-Material Components using Dual Energy CT - Proceedings of Vision, Modeling, and Visualization 2008, Konstanz, Germany, Germany, 2008, pp. 10 more
2008
J. Kastner, F. Pfeifer, C. Heinzl, R. Freytag - Pipeline for evaluation of CT-data of glass-fibre reinforced plastics - DACH Conference 2008 DGZFP , St. Gallen, Switzerland, 2008, pp. 8 more
2008
C. Heinzl, J. Kastner, E. Gröller - High Dynamic Range Imaging for Contrast Enhancement of X-ray Images - Proceedings of IEEE Workshop on X-Ray Micro Imaging of Materials, Devices, and Organisms, Dresden, Germany, 2008, pp. 8 more
2008
C. Heinzl, J. Kastner, E. Gröller - Geometriebestimmung von Multimaterialbauteilen und reproduzierbare Oberflächenextraktion - Proceedings Industrielle Computertomografie Fachtagung 2008, Wels, Austria, 2008, pp. 151-156 more
2007
C. Heinzl, J. Kastner, E. Gröller - Surface Extraction from Multi-Material Components for Metrology using Dual Energy CT - IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS, Vol. 13, No. 6, 2007, pp. 1520-1528 more
2007
J. Kastner, D. Salaberger, C. Heinzl - Measurement of microparts and reproducible surface extraction - PTB-Report Geometrymeasurement by industrial CT, Braunschweig, Germany, 2007, pp. 181-192 more
2007
C. Heinzl, J. Kastner, B. Georgi, H. Lettenbauer - Comparison of surface detection methods to evaluate cone-beam computed tomography data for three dimensional metrology - Proceedings of International Symposium on Digital industrial Radiology and Computed Tomography 2007, Lyon, France, 2007, pp. 8 more
2006
C. Heinzl, J. Kastner, E. Gröller - Reproducible Surface Extraction for Variance Comparison in 3D Computed Tomography - Proceedings of European Conference on Non-Destructive Testing 2006, Berlin, Germany, 2006, pp. 8 more
2006
C. Heinzl, R. Klingesberger, E. Gröller, J. Kastner - Robust surface detection for variance comparison - Proceedings of Eurographics/IEEE VGTC Symposium on Visualisation, Lissabon, Portugal, 2006, pp. 75-82 more
2017
Advanced composite materials (ACMs) typically contain two or more constituents, such as resin, fibers, and pores, with different physical and chemical characteristics. When combined, they produce a material… more
2016
Recent advances in 3D X-ray computed tomography (XCT) hardware have enabled applying the principles of Talbot–Lau grating interferometry (TLGI) in the first commercially available laboratory XCT… more
2016
Non-destructive testing (NDT) of components by means of microcomputed tomography (XCT) is an important task in many fields, e.g. in the automotive and aerospace sector. However, the demands towards NDT… more
2014
Die Mikrostruktur eines Lebensmittels dominiert hauptverantwortlich das Texturempfinden des Konsumenten. Somit ist das objektivierte Verständnis der strukturellen Zusammenhänge in komplexen Lebensmittelsystemen… more
2013
The non-destructive quality control of a wide variety of high-added value products, produced by innovative manufacturing techniques, remains a challenge. Examples include additive manufacturing parts,… more
2012
Within the past decades, advances in miniaturization from micro to nano-scale have had dramatic impacts on our lives. Consumer electronics, which once occupied large volumes, now fit in the palm of a hand.… more
2012
Recent years have seen a rapidly growing demand from aeronautic industry regarding function-oriented, highly integrated, energy-efficient and lightweight structures. In advanced composites a promising… more
2010
2010
2009
2008
2004
In the proposed project 7 degree programs of the College of Engineering, Wels will cooperate with 11 companies and 6 research institutions on new processes in non-destructive and particularly on in-situ… more
2004
Production industry is facing increased challenges in delivering highest quality in shorttime at competitive prices. As the dimensions or crucial features of products and partsbecome smaller reaching down… more