Person

Sascha Senck Dipl.-Biol. PhD

2019
J. Glinz, M. Reiter, T. Gastinger, A. Huskic, B. Plank, J. Kastner, S. Senck - Porosity determination in additively manufactured Ti parts using X-ray tomography - 9th International Conference on Industrial Computed Tomography (iCT) 2019, Padova, Italien, 2019, pp. 1-7 mehr
2019
S. Senck, M. Scheerer, B. Plank, C. Hannesschläger, J. Kastner - Characterization of fiber lay-up and defects in CFRP using Talbot-Lau grating interferometry - 9th International Conference on Industrial Computed Tomography (iCT) 2019, Padova, Italien, 2019, pp. 1-7 mehr
2018
J. Glinz, S. Senck, J. Kastner, G. Tondi - Determination of pore size distribution in Tannin- and Lignin-based foams using Xray microcomputed tomography - Proceedings of the 8th Conference on Industrial Computed Tomography, Wels, Austria (iCT 2018), Wels, Österreich, 2018, pp. 1-7 mehr
2018
S. Senck, P. Weißenbacher, J. Kastner, T. Reiter, S. Hofstaetter, K. Trieb, E. Kranioti - Assessment of trabecular microstructure and mechanical properties in the intermediate cuneiform of healthy and diabetic patients using microcomputed tomography - 8th World Congress of Biomechanics, Dublin, Irland,… mehr
2018
B. Plank, C. Gusenbauer, S. Senck, H. Höller, J. Kastner - Porosity Determination in CFRP by means of X-ray Computed Tomography Methods - Proceedings of the 12th European Conference on Non-destructive Testing, Göteborg, Schweden, 2018, pp. 1-2 mehr
2018
C. Unterweger, B. Plank, S. Senck, M. Mihalic, C. Fürst - Porous carbon templates from thermoset-based wood polymer composites as precursor for silicon carbide ceramics - Carbon 2018, Madrid, Spanien, Spanien, 2018, pp. 1-2 mehr
2018
C. Fürst, B. Plank, S. Senck, M. Mihalic, C. Unterweger - Bio-based silicon carbide ceramics from extruded thermoset-based wood polymer composites - ECCM18, Athens, Griechenland, 2018, pp. 1-7 mehr
2018
S. Senck, G. Kain, B. Lienbacher, M. Barbu, A. Petutschnigg - Water vapour diffusion resistance of larch (Larix decidua) bark insulation panels and application considerations based on numeric modelling - CONSTRUCTION AND BUILDING MATERIALS, 2018, pp. 308-316 mehr
2018
D. Kytýř, P. Zlámal, P. Koudelka, T. Doktor, I. Kumpová, M. Vopálenský, P. Heimel, S. Mühleder, S. Senck - X-ray-based Microstructural Analysis of Low Atenuaing Biocompaible Porous Materials under Simulated Physiological Condiions - Proceedings of the 8th Conference on Industrial Computed Tomography,… mehr
2018
A. Obaton, M. Lê, V. Prezza, D. Marlot, P. Delvart, A. Huskic, S. Senck, E. Mahé, C. Cayron - Investigation of new volumetric non-destructive techniques to characterise additive manufacturing parts - Welding in the World, 2018, pp. 1049-1057 mehr
2018
J. Glinz, P. Weißenbacher, S. Senck, A. Schrempf, D. Fürst, T. Gastinger, A. Huskic, T. Reiter, J. Kastner - Determination of pore size distribution and finite element analysis of additively manufactured Ti pedicle screws using X-ray microcomputed tomography - Proceedings of the 12th European Conference… mehr
2018
K. Trieb, A. Meryk, S. Senck, E. Naismith, B. Grubeck-Loebenstein - Immunological and morphological analysis of heterotopic ossification differs to healthy controls - BMC Musculoskeletal Disorders, Vol. 19, No. 327, 2018, pp. 1-7 mehr
2018
S. Senck, M. Scheerer, V. Revol, B. Plank, C. Hannesschläger, C. Gusenbauer, J. Kastner - Microcrack characterization in loaded CFRP laminates using quantitative two- and three-dimensional X-ray dark-field imaging - COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2018, pp. 206-2014 mehr
2018
C. Gusenbauer, J. Kastner, M. Reiter, B. Plank, D. Salaberger, S. Senck - POROSITY DETERMINATION OF CARBON AND GLASS FIBRE REINFORCED POLYMERS USING PHASE-CONTRAST IMAGING - JOURNAL OF NONDESTRUCTIVE EVALUATION, Vol. 10921, No. 4, 2018 mehr
2018
J. Kastner, C. Gusenbauer, B. Plank, J. Glinz, S. Senck - Challenges for grating interferometer X-ray computed tomography for practical applications in industry - Proceedings of the 12th European Conference on Non-destructive Testing, Göteborg, Schweden, 2018 mehr
2018
T. Fíla, J. Šleichrt, D. Kytýř, I. Kumpová, P. Zlámal, V. Rada, D. Vavřík, P. Koudelka, K. Kulawiecova, S. Senck - Deformation analysis of the spongious sample in simulated physiological conditions based on in-situ compression, 4D computed tomography and fast readout detector - Journal of Instrumentation,… mehr
2017
C. Gusenbauer, M. Reiter, B. Plank, S. Senck, C. Hannesschläger, S. Renner, R. Kaufmann, J. Kastner - Multi-modal Talbot-Lau grating interferometer XCT data for the characterization of carbon fibre reinforced polymers with metal components - Proceedings of the 7th Conference on Industrial Computed Tomography,… mehr
2017
B. Plank, S. Senck, S. Renner, C. Heinzl, J. Kastner - Improving the delineation of resin-rich areas in carbon-fibre reinforced polymers using phase-contrast imaging - 4th conference on X-ray and neutron phase imaging with gratings (XNPIG2017), Zurich Switzerland, Schweiz, 2017, pp. 1-2 mehr
2017
J. Sanctorum, E. Janssens, A. den Dekker, S. Senck, C. Heinzl, J. De Beenhouwer, J. Sijbers - A workflow to reconstruct grating-based X-ray phase contrast CT images: application to CFRP samples - Proceedings of the 7th Conference on Industrial Computed Tomography, Leuven, Belgium (iCT 2017), Leuven,… mehr
2017
E. Janssens, S. Senck, C. Heinzl, J. Kastner, J. De Beenhouwer, J. Sijbers - Fast Reconstruction of CFRP X-ray Images based on a Neural Network Filtered Backprojection Approach - Proceedings of the 7th Conference on Industrial Computed Tomography, Leuven, Belgium (iCT 2017), Leuven, Belgien, 2017, pp.… mehr
2017
J. Weissenböck, S. Senck, B. Plank, C. Heinzl, J. Kastner - Porosity Evaluation of Carbon Fiber-Reinforced Polymers with Porosity Analyzer - 3rd International Conference on Tomography of Materials and Structures (ICTMS 2017), Lund, Schweden, 2017, pp. 2 mehr
2017
S. Senck, B. Plank, J. Kastner, V. Revol, K. Dobes, M. Scheerer - Non-destructive evaluation of defects in polymer matrix composites for aerospace applications using X-ray Talbot-Lau interferometry and micro CT - 58th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA SciTech… mehr
2017
F. Prade, F. Schaff, S. Senck, F. Prade, F. Pfeiffer - Nondestructive characterization of fiber orientation in short fiber reinforced polymer composites with X-ray vector radiography - NDT & E INTERNATIONAL, 2017 mehr
2017
J. Kastner, C. Heinzl, B. Plank, D. Salaberger, C. Gusenbauer, S. Senck - New X-ray computed tomography methods for research and industry - Proceedings of the 7th Conference on Industrial Computed Tomography, Leuven, Belgium (iCT 2017), Leuven, Belgien, 2017, pp. 1-10 mehr
2017
J. Kastner, C. Gusenbauer, S. Senck, G. Rao - Talbot-Lau grating interferometer μXCT for quantitative characterization of polymeric structures by using phase and dark field contrast - APCNDT, Singapur, Singapur, 2017 mehr
2017
S. Senck, B. Plank, C. Gusenbauer, D. Salaberger, W. Santer, J. Kastner - Three-dimensional characterization of polymer foams using X-ray dark-field imaging - Proceedings of the 7th Conference on Industrial Computed Tomography, Leuven, Belgium (iCT 2017), Leuven, Belgien, 2017, pp. 1-7 mehr
2016
J. Kastner, S. Senck, B. Plank, D. Salaberger, G. Rao, C. Gusenbauer - THREE-DIMENSIONAL CHARACTERIZATION OF STRUCTURE AND DAMAGE OF POLYMERS USING A TALBOT-LAU GRATING INTERFEROMETER μ-XCT - ECCM17 - 17th European Conference on Composite Materials, Munich, Deutschland, 2016, pp. 1-8 mehr
2016
S. Senck, D. Salaberger, C. Gusenbauer, B. Plank, G. Rao, J. Kastner - Talbot-Lau grating interferometer XCT for the quantitative characterization of damage in polymers after impact and static tensile testing - 19th World Conference on Non-Destructive Testing, WCNDT 2016 , München, Deutschland, 2016,… mehr
2016
G. Rao, C. Gusenbauer, S. Senck, J. Kastner - Three dimensional visualisation of barley corn seed and fish tissue using Talbot Lau grating interferometer. - Bruker micro CT user meeting 2016, Luxembourg, Luxemburg, 2016, pp. 1-5 mehr
2016
C. Gusenbauer, S. Hunger, S. Senck, J. Kastner - Characterization of Tooth Samples with a Talbot-Lau Grating Interferometer μXCT Desktop Device - Proceedings 4th International Conference on Image Formation in X-Ray Computed Tomography, Bamberg, Deutschland, 2016, pp. 371-374 mehr
2016
C. Margherita , T. Sahra , K. Wiltschke-Schrotta, S. Senck, G. Oxilia, R. Sorrentino, G. Mancuso, G. Gruppioni, R. Lindner, J. Hublin, S. Benazzi - A reassessment of the presumed Torrener Bärenhöhle's Paleolithic human tooth - JOURNAL OF HUMAN EVOLUTION, Vol. 93, No. 1, 2016, pp. 120-125 mehr
2016
M. Tocheri, R. Dommain, S. McFarlin, S. Burnett, D. Case, C. Orr, N. Roach, B. Villmoare, A. Eriksen, D. Kalthoff, S. Senck, Z. Assefa, C. Groves, W. Jungers - The evolutionary origin and population history of the grauer gorilla - AMERICAN JOURNAL OF PHYSICAL ANTHROPOLOGY, Vol. 159, No. 1, 2016, pp.… mehr
2015
S. Senck, J. Kastner, B. Plank, D. Salaberger, C. Gusenbauer - Three-dimensional characterization of polymeric materials using a Talbot-Lau grating interferometer CT - Bruker microCT User Meeting, Bruges, Belgien, 2015 mehr
2015
J. Kastner, S. Senck, C. Gusenbauer, B. Plank, C. Hannesschläger, H. Zauner, C. Heinzl, A. Sasov - Three-dimensional characterization of fibre-reinforced polymers using a Talbot-Lau grating interferometer μ-CT und data fusion methods - XNPIG 2015 3rd Meeting of X-Ray and Neutron Phase Imaging with… mehr
2015
J. Kastner, B. Plank, C. Gusenbauer, S. Senck, V. Revol, A. Sasov - Talbot-Lau grating interferometer X-ray computed tomography for the characterization of fibre-reinforced polymers - Proceedings: Digital Industrial Radiology and Computed Tomography (DIR 2015), Ghent, Belgien, 2015, pp. 10 mehr
2015
S. Senck, M. Coquerelle - Morphological Integration and Variation in Facial Orientation in Pongo pygmaeus pygmaeus: A Geometric Morphometric Approach via Partial Least Squares - International Journal of Primatology, Vol. 36, No. 3, 2015, pp. 489-512 mehr
2015
S. Senck, F. Bookstein, S. Benazzi, J. Kastner, G. Weber - Virtual Reconstruction of Modern and Fossil Hominoid Crania: Consequences of Reference Sample Choice - The Anatomical Record, Vol. 298, No. 5, 2015, pp. 827-841 mehr
2015
S. Senck, B. Plank, J. Kastner, F. Ramadani, K. Trieb, S. Hofstaetter - Visualisierung lokaler kortikaler Defekte im Charcot-Fuß mittels Mikrocomputertomographie - Der Orthopäde, Vol. 44, No. 1, 2015, pp. 8-13 mehr
2014
S. Senck, D. Salaberger, M. Kastner, A. Fuchsbauer, J. Kastner - Mikrobielle Elektrolysezellen: dreidimensionale Charakterisierung einer mit Bakterien bewachsenen Elektrodenoberfläche mithilfe hochauflösender Röntgen-Computertomografie und Röntgenkontrastmitteln - DGZFP Jahrestagung 2014, Potsdam,… mehr
2014
B. Plank, S. Senck, C. Fürst, H. Scharleitner, J. Kastner - Qualitative and quantitative analysis of the process chain: Wood polymer composite – C-template – C/Si/SiC-ceramic by means of X-ray computed tomography - Proceedings of Conference on Industrial Computed Tomography (iCT2014), Wels, Österreich,… mehr
2014
B. Plank, C. Fürst, S. Senck, J. Kastner - Analyse mittels Röntgen-Computertomografie: Vom Holz-Polymer-Verbundwerkstoff über ein Kohlenstofftemplat zur C/Si/SiC-Keramik - DGZFP Jahrestagung 2014, Potsdam, Deutschland, 2014, pp. 8 mehr
2014
S. Senck, M. Coquerelle, G. Weber, S. Hofstaetter, J. Kastner - Estimation of microstructural parameters in the proximal tibia by means of shape regression: combining high resolution X-ray computed tomography and Geometric Morphometrics - WCO-IOF-ESCEO-SEVILLE 2014, Sevilla, Spanien, 2014, pp. 256 mehr
2014
S. Senck, C. Gusenbauer, M. Frelat, G. McGlynn, G. Weber, J. Kastner - Covariation between shape and bone microstructure in the proximal tibia in humans - Proceedings of Conference on Industrial Computed Tomography (iCT2014), Wels, Österreich, 2014, pp. 321-328 mehr
2016
In vielen Sektoren, z.B. im Automobil- und Luftfahrtbereich, ist die zerstörungsfreie Prüfung (ZfP) von Bauteilen mittels Mikro-Computertomographie (XCT) eine wichtige Aufgabe. Jedoch wachsen… mehr
2012
Ziel des Projektes ist einerseits für das Spritzgießverfahren - dem wichtigsten Verfahren in der Kunststoffverarbeitung - neue Messgrößen zur Charakterisierung des Formteilbildungsprozesses… mehr