Wissenschaftsgebiet

Messtechnik

Wissenschaftsgebiet

2019
G. Zauner, F. Auer, M. Bürger, C. Gieber - Gleisgeometriemesssystem der neuen Generation - Der Eisenbahningenieur, Vol. 2019, No. 2, 2019, pp. 36-39 mehr
2018
C. Gusenbauer, M. Reiter, D. Salaberger, B. Plank, J. Kastner - High-resolution X-ray computed tomography of inhomogeneous materials - Proceedings of the 12th European Conference on Non-destructive Testing, Göteborg, Schweden, 2018, pp. 1-8 mehr
2018
D. Salaberger, S. Gerner, S. Kahlen, J. Kastner - Investigation of damage development of polymer foams using interrupted in-situ X-ray tomography - Proceedings of the 12th European Conference on Non-destructive Testing, Göteborg, Schweden, 2018, pp. 1-5 mehr
2018
D. Salaberger, T. Lummerstorfer, M. Jerabek, J. Kastner - Single fibre characterization of heavily curved polymer fibres using X-ray computed tomography - Proceedings of the 18th European Conference on Composite Materials, Athens, Griechenland, 2018, pp. 1-6 mehr
2017
M. Jerabek, D. Salaberger, A. Amirkhanov, J. Kastner - Microstructure dependent damage mechanisms in 3D using X-ray tomography - Proceedings of the 21st International conference on Composite Materials, Xian, China, 2017, pp. 1-5 mehr
2016
D. Salaberger, M. Jerabek, C. Hannesschläger, J. Kastner - Single fibre characterisation of curved fibres within a thermoplastic matrix using X-ray tomography - ECCM17 - 17th European Conference on Composite Materials, Munich, Deutschland, 2016 mehr
2016
G. Gsellmann, M. Jerabek, D. Salaberger - Comparison of predicted and measured fiber orientations in injection molded parts - 6th Conference on Industrial Computed Tomography, Wels, Österreich, 2016 mehr
2015
D. Salaberger, P. Hine, M. Jerabek, J. Kastner - Assessment of accuracy of fibre orientation measurement using X-ray computed tomography - Proceedings of the 20th International Conference on Composite Materials , Copenhagen, Dänemark, 2015, pp. 8 mehr
2015
S. Kleindel, D. Salaberger, C. Hochenauer - Measurement and Numerical Simulation of Void and Warpage in Glass Fiber Reinforced Molded Chunky Parts - INTERNATIONAL POLYMER PROCESSING, Vol. 30, No. 1, 2015, pp. 100-112 mehr
2014
M. Aigner, D. Salaberger - Determining the orientation, distribution and concentration of glass fibers in polymer matrix studied by means of X-ray computed tomography and optical coherence tomography - Proceedings of Conference on Industrial Computed Tomography (iCT2014), Wels, Österreich, 2014, pp.… mehr
2011
E. Heiss, N. Natchev, D. Salaberger - Oropharyngeal morphology in the basal tortoise Manouria emys emys with comments on form and function of the testudinid tongue - JOURNAL OF MORPHOLOGY, Vol. 272, No. 272, 2011 mehr
2011
M. Hochegger, B. Harrer, H. Degischer, S. Ilie - Röntgen-Computertomografie der Verformungsporen in Warmzugproben aus Baustahlbrammen - Materialographie Metalle - Keramik -Polymere, Karlsruhe, Deutschland, 2011, pp. 1-6 mehr
2010
D. Salaberger, K. Arunachalam Kannappan, J. Kastner, J. Reussner, T. Auinger - CT Data Evaluation of Fibre Reinforced Polymers to Determine Fibre Length Distribution - PPS26-2010, Banff, Canada, Kanada, 2010 mehr
2010
E. Heiss, D. Salaberger - Hurt yourself to hurt your enemy: new insights on the function of the bizarre antipredator mechanism in the salamandrid Pleurodeles waltl - JOURNAL OF ZOOLOGY, Vol. 280, No. 2, 2010, pp. 156-162 mehr
2010
D. Salaberger, K. Arunachalam Kannappan, J. Kastner - Methode zur 3D Charakterisierung von Fasern in verstärkten Polymeren - Industrielle Computertomografie 2010, Wels, Österreich, 2010, pp. 51-58 mehr
2008
D. Stifter, E. Schlotthauer, K. Wiesauer, J. Kastner, M. Wurm - Investigation of polymer and polymer/fibre composite materials with optical coherence tomography - MEASUREMENT SCIENCE & TECHNOLOGY, Vol. 19, No. 74011, 2008, pp. 1-8 mehr
2008
C. Heinzl, J. Kastner, T. Möller, E. Gröller - Statistical analysis of Multi-Material Components using Dual Energy CT - Proceedings of Vision, Modeling, and Visualization 2008, Konstanz, Germany, Deutschland, 2008, pp. 10 mehr
2008
B. Darmstädter, D. Salaberger - Erste Ergebnisse der 3D- Röntgencomputertomographischen Untersuchungen an Blasinstrumenten der Sammlung alter Musikinstrumente in Technologische Studien, 2008, pp. 108-139 mehr
2007
S. Griesser, G. Buchinger, T. Raab, D. P. Claassen, D. Meissner - Charcterization of Fuel Cells and Fuel Cell Systems Using Three-Dimensional X-Ray Tomography - Journal of Fuel Cell Science and Technology, Vol. 4, No. 1, 2007, pp. 84-87 mehr
2007
C. Heinzl, J. Kastner, B. Georgi, H. Lettenbauer - Comparison of surface detection methods to evaluate cone-beam computed tomography data for three dimensional metrology - Proceedings of International Symposium on Digital industrial Radiology and Computed Tomography 2007, Lyon, Frankreich, 2007, pp.… mehr
2007
C. Heinzl, J. Kastner, E. Gröller - Surface Extraction from Multi-Material Components for Metrology using Dual Energy CT - IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS, Vol. 13, No. 6, 2007, pp. 1520-1528 mehr
2007
G. Windisch, D. Salaberger, W. Rosmarin, J. Kastner - A model for clubfoot based on micro-CT data - JOURNAL OF ANATOMY, Vol. 210, No. 6, 2007, pp. 761-766 mehr
2007
D. Salaberger, J. Kastner - 3D-Röntgen-Computertomografie für die zerstörungsfreie Werkstoffprüfung - Tagungsband des ersten Forschungsforum der österreichischen Fachhochschulen, Fachhochschule Salzburg, Campus Urstein, Österreich, 2007, pp. 1 mehr
2007
J. Kastner, D. Salaberger, C. Heinzl - Messung von Mikrobauteilen und reproduzierbare Oberflächenextraktion - PTB-Bericht Geometriebestimmung mit industrieller Computertomografie, Braunschweig, Deutschland, 2007, pp. 181-192 mehr
2006
J. Kastner, D. Heim, D. Salaberger - Advanced applications of computed tomography by combination of different methods - Proceedings of European Conference on Non-Destructive Testing 2006, Berlin, Deutschland, 2006, pp. 12 mehr
2006
C. Heinzl, J. Kastner, E. Gröller - Reproducible Surface Extraction for Variance Comparison in 3D Computed Tomography - Proceedings of European Conference on Non-Destructive Testing 2006, Berlin, Deutschland, 2006, pp. 8 mehr
2006
C. Heinzl, R. Klingesberger, E. Gröller, J. Kastner - Robust surface detection for variance comparison - Proceedings of Eurographics/IEEE VGTC Symposium on Visualisation, Lissabon, Portugal, 2006, pp. 75-82 mehr