Wissenschaftsgebiet

Werkstofftechnik

Wissenschaftsgebiet

2019
S. Kaar, R. Schneider, D. Krizan, C. Béal, C. Sommitsch - Bainitic transformation during the two-step Q&P process in a lean medium Mn steel containing silicon - Proceedings ECHT 2019, Bardolino, Italien, 2019, pp. 10 mehr
2019
S. Kaar, R. Schneider, D. Krizan, C. Béal, C. Sommitsch - Comparative Investigation of the Tensile Behavior of Two Medium Mn Q&P Steels - Proceedings HMnS 2019, Aachen, Österreich, 2019, pp. 37-40 mehr
2018
S. Kaar, R. Schneider, D. Krizan, C. Béal, C. Sommitsch - Influence of the quenching and partitioning process on the isothermal bainitic transformation kinetics in a lean medium manganese steel - Proc. of the 25th Congr. of IFHTSE, Xian, China, 2018, pp. 48 mehr
2018
D. Krizan, K. Steineder, S. Kaar, T. Hebesberger - Development of third generation advanced high strength steels for automotive applications - Proceedings Transfer 2018, Trencin, Slowakei, 2018 mehr
2018
S. Kaar, R. Schneider, D. Krizan, C. Sommitsch, C. Béal - Einfluss des Umwandlungsverhaltens auf das Gefüge und die - Proceedings Härtereikongress 2018, Köln, Deutschland, 2018, pp. 33 mehr
2017
T. Hebesberger, D. Krizan, T. Kurz, F. Winkelhofer, K. Steineder, R. Schneider - Die Wärmebehandlung als Instrument zur Einstellung der Eigenschaften von (Tiefzieh)stählen für den (Karosserie-)Leichtbau - Härtereitagung 2017, Wien, Österreich, 2017, pp. 3-9 mehr
2017
R. Schneider - Härtereitagung 2017, 2017 mehr
2016
K. Steineder, D. Krizan, R. Schneider, C. Béal, C. Sommitsch - The effects of intercritical annealing temperature and initial microstructure on the stability of retained austenite in a 0.1C-6Mn steel - Advanced Materials Research, 2016, pp. 1847-1852 mehr
2016
K. Steineder, D. Krizan, R. Schneider, C. Béal, C. Sommitsch - On the micro-scale damage behavior of a 0.1C6Mn Medium-Mn steel - Proceedings der 1st International Conference on Automobile Steel & 3rd International Conference on High Manganese Steels, Chengdu, China, 2016, pp. 415-419 mehr
2016
B. Stauder, M. Rafetzeder, R. Schneider - Legierungs- und Wärmebehandlungsentwicklung neuer Al-Gusswerkstoffe für Motorenbauteile - 10 Jahre einer erfolgreichen Kooperation - Tagungsband zum Symposium "12 Jahre MHT", Wels, Österreich, 2016, pp. 12-13 mehr
2015
P. Peißl, R. Schneider, M. Rahofer, L. Samek, E. Arenholz - Einfluss von Mikrolegierungen auf die Phasenumwandlung und Mikrostruktur eines 3.5% Medium-Mangan-Stahls - Proceedings ISDM 2015, Aachen, Deutschland, 2015, pp. 52-61 mehr
2015
P. Peißl, R. Schneider, M. Rahofer, L. Samek, E. Arenholz - The Effect of Niobium on the Microstructure and Phase Transformation Kinetics in Low-Carbon Medium Manganese Steels - HTM Journal of Heat Treatment and Materials, Vol. 70, No. 6, 2015, pp. 267-275 mehr
2015
M. Rahofer, R. Schneider, P. Peißl, C. Commenda, L. Samek, E. Arenholz - Metallographische Gefügecharakterisierung eines Medium-Mn-Stahles - Proceedings ISDM 2015, Aachen, Deutschland, 2015, pp. 109-116 mehr
2014
D. Heim, C. Forsich, R. Holecek, A. Gebeshuber, C. Dipolt, T. Müller, C. Lugmair, V. Strobl - DLC-Coatings on Plain Carbon and Low Alloyed Steels - 58th Annual Society of Vacuum Coaters Technical Conference, Chicago, USA, 2014, Chicago USA, Vereinigte Staaten von Amerika, 2014 mehr
2014
R. Mesquita, R. Schneider, C. Sales Goncalves - Heat Treating of Hot-Work Tool Steels in Heat Treating of Irons and Steels Vol 4D, 2014, pp. 336-346 mehr
2014
R. Schneider, R. Mesquita, W. Schützenhöfer - Distortion in tool Steels in Heat Treating of Irons and Steels Vol 4D, 2014, pp. 300-311 mehr
2014
R. Schneider - Surface hardening of cold work tool steels as an energy efficient alternative to furnace heat treatment - Proc. of the 2nd Int. Conf. on Energy and the Future of Heat Treatment and Surface Engineering, Beijing, China, 2014, pp. 1-2 mehr
2014
R. Mesquita, R. Schneider, C. Sales Goncalves - Heat Treating of Mold Steels and Corrosion-resistant Tool Steels in Heat Treating of Irons and Steels Vol 4D, 2014, pp. 358-362 mehr
2014
R. Mesquita, R. Schneider, C. Sales Goncalves - Heat Treating of Cold-Work Tool Steels - Medium-Alloy air Hardening, High Carbon High Chromium and High Vanadium-Powder Metallurgy Steels in Heat Treating of Irons and Steels Vol 4D, 2014, pp. 329-335 mehr
2014
R. Schneider, R. Mesquita, H. Altena, T. Müller, P. Seemann - Processes and Furnaces Equipment for Heat Treating of Tool Steels in Heat Treating of Irons and Steels Vol 4D, 2014, pp. 288-299 mehr
2014
R. S. E. Schneider - Austenitic Nitriding and Nitrocarburizing of steels in Thermochemical Surface Engineering of Steels (Editors: E. J. Mittemeijer, M. A. J. Somers), 2014, pp. 373-391 mehr
2014
H. Zoch, R. Schneider, T. Lübben - Proc. of the Europ. Conf. in Heat Treatment and 21st IFHTSE Congress, 2014 mehr
2014
D. Heim, C. Forsich, T. Müller, A. Gebeshuber - Deposition of N, F and O-doped Amorphous Carbon-Silicon Coatings in an Industrial DC-PACVD-System - 14th International Conference on Plasma Surface Engineering, Garmisch-Partenkirchen, Deutschland, 2014 mehr
2014
R. Mesquita, R. Schneider, C. Sales Goncalves - Heat Treating of High-Speed Tool Steels in Heat Treating of Irons and Steels Vol 4D, 2014, pp. 347-357 mehr
2014
R. Mesquita, R. Schneider, C. Sales Goncalves - Heat Treating of Cold-Work Tool Steels - Low- and Un-Alloyed Water and Oil Hardening Steels in Heat Treating of Irons and Steels Vol 4D, 2014, pp. 320-328 mehr
2014
R. Mesquita, R. Schneider - Introduction to Heat Treating of Tool Steels in Heat Treating of Irons and Steels Vol 4D, 2014, pp. 277-287 mehr
2014
K. Steineder, R. Schneider, D. Krizan, C. Béal, C. Sommitsch - Microstructural evolution of two low-carbon steels with a medium manganese content - Tagungsband 2. HMnS Konferenz, Aachen, Deutschland, 2014, pp. 351-354 mehr
2013
R. Schneider - Tagungsunterlagen "Härtereitagung 2013", 2013, pp. 1-98 mehr
2013
R. Schneider - Developing the world of tooling - International Heat Treatment and Surface Engineering, Vol. 7, No. 3, 2013, pp. 99-100 mehr
2013
S. Hofer, K. Steineder, R. Schneider, M. Hartl, E. Arenholz, L. Samek - Effect of annealing parameters on microstructure and mechanical properties of phosphorus alloyed 16%Mn-TWIP steel - International Symposium on New Developments in Advanced High-Strength Sheet Steels Proceedings, Vail, Colorado, USA,… mehr
2013
M. Auer, K. Steineder, R. Schneider, M. Klein - Vergleichende Untersuchung der Härte-Zähigkeitsbeziehung der Stähle 42CrMo4, 51CrV4, 55Cr3 und 100Cr6 im Bereich der Blausprödigkeit - Tagungsband Härtereitagung 2013, Wien, Österreich, 2013 mehr
2013
K. Steineder, R. Schneider - Influence of short-cycle heat treatment conditions on the hardness-toughness-relationship of the steels 51CrV4, ~74NiCr2 and 100Cr6 - HTM J. Heat Treatment Material, Vol. 68, No. 2, 2013, pp. 77-84 mehr
2012
D. Heim, C. Forsich, T. Müller - Deposition of thick a-C:H:Si coatings for tribological applications - 55th Annual Technical Conference Proceedings, Santa Clara, Vereinigte Staaten von Amerika, 2012 mehr
2012
K. Steineder, R. Schneider - Untersuchung der Härte-Zähigkeits-Beziehung des 51CrV4 anhand unterschiedlicher Kurzzeitwärmebehandlungen - Proceedings of the 19th International Student's Day of Metallurgy, Freiberg, Deutschland, 2012 mehr
2012
R. Schneider, B. Eichinger, G. Rabler, C. Walch - Investigation of the wear behaviour of different tool steels and heat treatment conditions for the cutting of a HCT980C advanced high strength steel - Proc. of the 9th Int. Tooling Conference „Developing the World of Tooling”, Leoben, Österreich,… mehr
2012
B. Eichinger, R. Schneider, G. Rabler, C. Walch - Untersuchung des Verschleißverhaltens beim Scherschneiden eines HCT980C - Proceedings of the 19th International Student's Day of Metallurgy, Freiberg, Deutschland, 2012, pp. 197-203 mehr
2011
R. Schneider, R. Mesquita - Advances in tool steels and their heat treatment – Part 2: Hot Work Tool Steels and Plastic Mould Steels - International Heat Treatment and Surface Engineering, Vol. 5, No. 3, 2011, pp. 94-100 mehr
2011
R. Schneider, R. Grunwald, C. Schüller - Microstructural Changes during Short-cycle Heat Treatment of Cold Work Tool Steels - Int. J. of Microstructure and Material Properties , Vol. 6, No. 6, 2011, pp. 455-464 mehr
2011
T. Fuchs, G. Pöckl, J. Mittmannsgruber, R. Schneider - Nitrieren von pulvermetallurgisch hergestellten hochlegierten Kunststoffformenstählen - HTM J. Heat Treatment Material, Vol. 66, No. 2, 2011, pp. 87-93 mehr
2010
C. Forsich, D. Heim, T. Müller, A. Gebeshuber - Upscaling of an a-C:H:Si Triplex Process in an Industrial DC PACVD System - 37th International Conference on Metallurgical Coatings and Thin Films, San Diego, Vereinigte Staaten von Amerika, 2010 mehr
2010
R. Schneider, R. Mesquita, C. Schüller - Comportamento de aços ferramenta em tratamentos térmicos de ciclos curtos - Proceedings of Encontro da Cadeia de Ferramentas, Moldes e Matrizes - Moldes 2010, Sao Paulo, Sao Paulo, Brasilien, 2010, pp. 160-169 mehr
2010
D. Heim, C. Forsich, C. Übleis, A. Gebeshuber, T. Müller - Amorphous carbon-silicon-coatings on nitrided and post-oxidized steels deposited by DC-PACVD - 1st Austrian Symposium on Carbon Based, Leoben, Österreich, 2010 mehr
2010
R. Mesquita, R. Schneider - Tool steel quality and surface finishing of plastic molds - Exacta, Vol. 8, No. 3, 2010, pp. 307-318 mehr
2010
R. Schneider, C. Schüller, R. Grunwald - Surface hardening of cold-work tool steels - an energy saving and low distortion heat treatment alternative? - Proceedings of the International Conference on Reduction Of Energy Consumption In Heat And Thermochemical Treatment Technologies And Installations,… mehr
2009
B. Harrer - Detektierbarkeit von Heterogenitäten in Fe - Basis - und Aluminiumlegierungen mittels Röntgen - Computertomographie - Phd Thesis, Technische Universität Wien, Inst. f. Werkstoffwissenschaft u. Werkstofftechnologie, Österreich, 2009, pp. 1-229 mehr
2009
C. Forsich, D. Heim, T. Müller - Adhesion and Homogeneity of a-C:H:Si Films Deposited in a Modified Plasma Nitriding System for Industrial Application - 36th International Conference on Metallurgical Coatings and Thin Films 2009, San Diego, Vereinigte Staaten von Amerika, 2009 mehr
2008
C. Forsich, D. Heim, T. Müller - Influence of Pre-Treatment and Roughness on Tribological Properties of a-C:H:Si Coatings Deposited on Nitrided and Postoxidized Steel by Means of DC-PACVD - 12th Joint Vacuum Conference, Balaton, Ungarn, 2008 mehr
2008
C. Forsich, D. Heim, T. Müller - Eigenschaften und Anwendungen von Si-hältigen Kohlenstoffschichten - Welser Werkstoff-Kolloquium 2008, Wels, Österreich, 2008, pp. 8 mehr
2008
T. Müller, A. Gebeshuber, D. Heim, C. Forsich - Influence and effects of gas flow on the deposition of SiOCN films in an industrial scale DC glow discharge plasma system - Asian-European International Conference on Plasma Surface Engineering 2008, München, Deutschland, 2008, pp. 1 mehr
2008
D. Heim, C. Forsich, T. Müller - Tribological Behavior of Amorphous Carbon-Silicon-Coatings on Nitrided and Post-Oxidized Steels Deposited by DC-PACVD - 11th International Conference on Plasma Surface Engineering, Garmisch-Partenkirchen, Deutschland, 2008 mehr
2008
C. Forsich, D. Heim, T. Müller - Influence of the deposition temperature on mechanical and tribological properties of a-C:H:Si coatings on nitrided and postoxidized steel deposited by DC-PACVD - SURFACE & COATINGS TECHNOLOGY, Vol. 203, No. 203, 2008, pp. 521-525 mehr
2008
C. Forsich, D. Heim, D. Müller - PACVD zur Abscheidung Si-hältiger Kohlenstoffschichten - Proceedings FH Science Day 2008, Linz, Österreich, 2008 mehr
2008
C. Forsich, D. Heim, T. Müller - Influence of the Deposition Temperature on Mechanical and Tribological Properties of a-C:H:Si Coatings on Nitrided and Postoxidized Steel Deposited by DC-PACVD, Surface and Coatings Technology - 35th International Conference on Metallurgical Coatings and Thin Films… mehr
2008
R. Schneider - Ausstattung, Ressourcen und Kooperationen des Fachbereichs Werkstofftechnik - Welser Werkstoff-Kolloquium 2008, Wels, Österreich, 2008, pp. 4-9 mehr
2007
J. Kastner, D. Angermaier, E. Schlotthauer, G. Zitzenbacher, W. Stadlbauer - Mikro- und Nano-Computertomographie für die dreidimensionale Charakterisierung von faserverstärkten Verbundwerkstoffen - Proceedings of the Industrial Symposium Mechatronics 2007 on Sensorics, Linz, Österreich, 2007, pp.… mehr
2007
C. Forsich, D. Heim - Deposition of SiOCN and Si-C:H Films in an Industrial Pulsed dc PACVD System - 34th International Conference on Metallurgical Coatings and Thin Films 2007, San Diego, Vereinigte Staaten von Amerika, 2007, pp. 1 mehr
2006
C. Forsich, D. Heim, T. Müller - Silica coatings on steel substrates deposited by bipolar pulsed DC PACVD - Tenth International Conference on Plasma Surface Engineering , Braunschweig, Deutschland, 2006, pp. 1 mehr