Forschungseinheit
Fakultät für Technik und Umweltwissenschaften, Wels
Beschreibung:
Der FH-Campus Wels ist die Fakultät für Technik und Umweltwissenschaften der FH Oberösterreich und besteht bereits seit 1994. Mit den technisch/wirtschaftlichen Schwerpunkten und den sehr erfolgreichen Forschungsprojekten in diesen Bereichen zählt er zu den renommiertesten Fachhochschulen Österreichs.
Den Studenten werden in Wels moderne, praxisorientierte Hochschul-Studien mit ausgezeichneten Jobaussichten geboten.
Seit 2005 ist der FH-Campus Wels mit seinem Neubau und dem wiedereröffneten generalsanierten FH-Gebäude in der Roseggerstraße auch einer der modernst ausgestatteten technischen Hochschulen. Insgesamt wurden vom Land Oberösterreich und der Stadt Wels rund 50 Mio Euro investiert, um die Räumlichkeiten und Laborausstattungen der Welser Karriereschmiede auf den neuesten Stand der Technik zu bringen.
Leitung:
Untergeordnete Forschungseinheiten:
Personen:
- Christian Aigner
- Martin Aigner BSc
- Elke Aigner
- Dipl. Ing. Dr. Albert Angerbauer
- Michael Auer BSc
- Prof. (FH) Dipl.-Ing. Dr. Franz Auinger
- DI (FH) Wolfgang Baumgartinger
- Ing. Hans-Jürgen Becherstorfer
- Prof. (FH) Dipl.-Ing. Dr. Peter Blaimschein
- Elke Bumberger
- Ines Bürger
- Dipl.-Ing. Robert Burgholzer
- Prof. (FH) Dipl.-Ing. Dr. Reinhard Busch
- Prof. (FH) Dr. Franz Daschil
- Prof. (FH) Dr. Clemens Derndorfer
- Peter Dopita
- James Eckmair
- DI (FH) Raimund Edlinger
- Prof. (FH) PD DI Dr. Martin Egger
- Bernhard Eichinger BSc
- Dipl.-Ing. Dr. Thomas Eidenberger
- Katharina Eisenhuber B.Sc.
- Ing. Erwin Eisschiel
- DI Dr. Christian Forsich
- Peter Michael Gabor
- Mag. Iris Gabriel
- Prof. (FH) Dipl.-Ing. Reinhard Gahleitner
- Prof. (FH) Mag. Dr. Kurt Gaubinger
- Ing. René Geber
- Ing. Markus Gillich
- Prof. (FH) Ing. Mag. DDr. Willibald Girkinger
- Prof. (FH) Dipl.-Ing. Dr. Gernot Grabmair
- Sabine Gramer
- DI Stefan Griesser
- DI (FH) Jürgen Gruber
- DI Christian Gusenbauer
- Dipl. Des. (FH) Susann Hahnwald
- Prof. (FH) Jean D. Hallewell Haslwanter MSc BSc
- Dipl.-Ing. Gerhard Hampejs
- DI (FH) Gerhard Hanis
- DI (FH) Wolfgang Hauer
- Prof. (FH) Dipl.-Ing. Dr. Daniel Heim
- Mag. Peter Helmberger
- Prof. (FH) Univ.Doz. Mag. Dr. Günther Hendorfer
- Claudia Hinterleitner-Kreisl
- Prof. (FH) Dipl.-Ing. Dr. Christoph Hochenauer
- Dipl.-Ing. Dr. Otmar Höglinger
- Ing. Christian Hollinetz
- Agnes Holzinger
- Michael Horacek
- Ing. Erwin Hörletzeder
- Christa Huemer
- Franz Humpl
- Prof. (FH) Dipl.-Ing. Dr. Aziz Huskic
- DI (FH) Stephan Hutterer
- Ing. Helmut Hüttmannsberger
- Prof. (FH) Dipl.-Biologe Dr. Alexander Jäger
- Prof. (FH) Dipl.-Ing. Dr. Mario Jungwirth
- Mag. Dr. Heike Kahr
- Ulrike Kapsamer
- Martin Kasper BSc
- Prof. (FH) Dipl.-Ing. Dr. Johann Kastner
- Prof. (FH) Univ.Doz. Dipl.-Ing. Dr. Karl Heinz Kellermayr
- DI (FH) Manuel Kendel
- Thomas Koniarek BSc
- Prof. (FH) Dipl.-Ing. Rudolf Kraft
- DDipl.-Ing. Mag. Dr. Michaela Kröppl
- Ing. DI (FH) Gabriel Kwasniewski
- Manuel Längauer BSc
- Prof. (FH) Dipl.-Ing. Dr. Christof Lanzerstorfer
- Prof. (FH) Arch. Dipl.-Ing. Dr. Herbert Claus Leindecker
- Andrea Leindecker-Oborzil
- DI (FH) Keyan Liu MSc
- DI (FH) Stefan Mairhofer
- Danijel Marincic
- Ing. Tanja Mayr
- Ing. Gerald Metzbauer BSc
- Heinz Michalik
- Prof. (FH) Dipl.-Ing. Kurt Niel
- Thomas Obrlik
- Peter Stanley Orgill B.A., P.G.C.E., Cert. T.E.F.L.
- Armin Paar BSc
- Prof. (FH) Ing. Dr. Helmut Peirlberger
- DI (FH) Bernhard Plank
- Claudia Plochberger-Brandlmayr
- Dipl.-Ing. Werner Posch
- Dipl.-Ing. Dr. Wilfried Preitschopf
- Dipl.-Kultur.Univ. Vanessa Prüller
- Ulrich Pschebezin BSc
- Prof. (FH) Dipl.-Ing. Dr. Michael Rabl
- Andreas Reh MSc
- Mag. Claudia Reinthaler
- Prof. (FH) Dipl.-Ing. Dr. Thomas Josef Reiter
- DI (FH) Michael Reiter
- Prof. (FH) Dipl.-Ing. Walter Rokitansky
- DI Dietmar Salaberger
- Klaus-Dieter Scheer
- FH-Prof. Priv.-Doz. DI Dr. Klaus Schiefermayr
- Prof. (FH) Mag. Dr. Christine Schiller-Ripota
- Margit Schmuckermayr
- Prof. (FH) Dipl.-Ing. Dr. Reinhold Schneider
- Angela Schober
- Christopher Schüller
- Philipp Schuster BSc
- Prof. (FH) Mag. Dr. Fiona Schweitzer
- Gisela Seifried
- Dr. Manuel Selg
- DI Zeljka Simicevic
- Mag. Elena Spitzer
- Christoph Spreitzer BSc
- Prof. (FH) Dipl.-Ing. Dr. Burkhard Stadlmann
- Prof. (FH) Dipl.-Ing. Dr. Michael Steinbatz
- Daniel Steindl BSc
- Katharina Steineder BSc
- Prof. (FH) PD DI Dr. Wolfgang Steiner
- DI (FH) Viktoria Steinmüller
- Bernhard Stotter BSc
- Ing. Josef Helmut Suchan
- Prof.(FH) Dipl.Ing.Dr. Christiane Takacs-Schwarzinger
- Krystyna Trubicki
- Douglas Lee Vaught BA
- Markus Vogel
- Melanie Walcherberger
- Dr. Julian Weghuber
- DI (FH) Rainer Widmann
- Elisabeth Wiesbauer
- Kurt Johann Wieser
- Norbert Wolfgang Wild BSc
- Dipl. Ing. Dr. Wolfgang Witteveen
- Mag. Beate Wögerbauer
- Ing. Michael Zauner BSc
- DI (FH) Dr. Gerald Zauner
- Prof. (FH) Dipl.-Ing. Dr. Peter Zeller
- Elisabeth Zicha
- Prof. (FH) Dipl.-Ing. Dr. Gernot Zitzenbacher
Publikationen:
| 2011 | On the extension of global vibration modes with Ritz-vectors needed for local effects K. Sherif, W. Witteveen, H. Irschik, H. Holl, K. Mayerhofer - On the extension of global vibration modes with Ritz-vectors needed for local effects - Proceedings of IMAC XXIX, Jacksonville, Florida, Vereinigte Staaten von Amerika, 2011 |
| 2011 | Is open innovation an effective method to embrace turbulent environments?" F. Schweitzer, O. Gassmann, K. Gaubinger - Is open innovation an effective method to embrace turbulent environments?" - Proceedings of the XXII ISPIM Conference, 12.-15. Juni, Hamburg, Hamburg, Deutschland, 2011 |
| 2011 | 3D-Analysis of Bending-Type Ultrasonic Transducers for Distance Measurement Applications M. Jungwirth, M. Rabl, M. Kaltenbacher, S. Rupitsch - 3D-Analysis of Bending-Type Ultrasonic Transducers for Distance Measurement Applications - Proceedings IEEE International Ultrasonics Symposium 2011, Orlando, Florida, Vereinigte Staaten von Amerika, 2011, pp. 4 |
| 2011 | Sustainable Product Design in Investment Goods Markets K. Gaubinger, M. Kretschmer, F. Schweitzer - Sustainable Product Design in Investment Goods Markets - Proceedings of the XXII ISPIM Conference, 12.-15. Juni, Hamburg, Hamburg, Deutschland, 2011 |
| 2011 | Establishing a sustainable oriented technology development framework for medium-sized companies of the supply industry K. Gaubinger, R. Zweimüller, F. Schweitzer - Establishing a sustainable oriented technology development framework for medium-sized companies of the supply industry - Proceedings of the XXII ISPIM Conference, 12.-15. Juni, Hamburg, Hamburg, Deutschland, 2011 |
| 2011 | Characterisation of defects in carbon fibre reinforced polymers (CFRP) M. Rodriguez-Hortala, D. Salaberger, S. Hernandez, J. Kastner, H. Degischer - Characterisation of defects in carbon fibre reinforced polymers (CFRP) - DGM Verbundwerkstoffe und Werkstoffverbunde, Chemnitz, Deutschland, 2011, pp. 208-215 |
| 2011 | Evaluation of CT data from Fibre Reinforced Polymers to determine fibre length distribution D. Salaberger, K. Arunachalam Kannappan, J. Kastner, J. Reussner, T. Auinger - Evaluation of CT data from Fibre Reinforced Polymers to determine fibre length distribution - INTERNATIONAL POLYMER PROCESSING, Vol. 26, No. 3, 2011, pp. 283-291 |
| 2011 | Oropharyngeal morphology in the basal tortoise Manouria emys emys with comments on form and function of the testudinid tongue E. Heiss, N. Natchev, D. Salaberger - Oropharyngeal morphology in the basal tortoise Manouria emys emys with comments on form and function of the testudinid tongue - JOURNAL OF MORPHOLOGY, Vol. 272, No. 272, 2011 |
| 2011 | Fly ashes from biomass incineration - Analyses of their composition with IC, ICP-OES, SEM-EDX and XRD M. Kröppl, C. Lanzerstorfer, G. Zitzenbacher - Fly ashes from biomass incineration - Analyses of their composition with IC, ICP-OES, SEM-EDX and XRD - Tagungsband FFH 2011 (5. Forschungsforum der österreichischen Fachhochschulen), Wien (Favoriten), Österreich, 2011, pp. 244-247 |
| 2011 | Extraction of heavy metals from biomass fly ashes under acid conditions M. Kröppl, M. Ceras-Arrese, C. Lanzerstorfer - Extraction of heavy metals from biomass fly ashes under acid conditions - Abstract Book 14. Chemietage, Linz, Österreich, 2011, pp. 1 |
| 2011 | Wann gibt es Biosprit aus Stroh H. Kahr, A. Jäger - Wann gibt es Biosprit aus Stroh - Inform, Vol. 2, No. 3, 2011, pp. 15-20 |
| 2011 | Ein neues Multi-Feedstock-Bioraffineriekonzept A. Jäger, H. Steinmüller, J. Lindorfer, M. Mandl - Ein neues Multi-Feedstock-Bioraffineriekonzept - Tagungsband FFH 2011 (5. Forschungsforum der österreichischen Fachhochschulen), Wien (Favoriten), Österreich, 2011, pp. 30-33 |
| 2011 | Trace elemental characterization of fly ash M. Kröppl, I. Lahoz-Munoz, M. Zeiner - Trace elemental characterization of fly ash - Toxicological and Environmental Chemistry, Vol. 93, No. 5, 2011, pp. 886-894 |
| 2011 | Improvements in Bioethanol Production from straw H. Kahr, S. Helmberger, A. Jäger - Improvements in Bioethanol Production from straw - Tagungsband FFH 2011 (5. Forschungsforum der österreichischen Fachhochschulen), Wien (Favoriten), Österreich, 2011, pp. 34-37 |
| 2011 | Optimierung eines mehrstufigen Membranprozess zur Gewinnung von Aminosäuren und Milchsäure aus nachwachsenden Rohstoffen im technischen Maßstab T. Raab, A. Jäger, H. Steinmüller, M. Mandl, J. Ecker - Optimierung eines mehrstufigen Membranprozess zur Gewinnung von Aminosäuren und Milchsäure aus nachwachsenden Rohstoffen im technischen Maßstab - Tagungsband FFH 2011 (5. Forschungsforum der österreichischen Fachhochschulen), Wien (Favoriten), Österreich, 2011, pp. 26-29 |
| 2011 | Efficient Computer Based Optimization of Thermal Management in Electronic Systems M. Jungwirth, H. Weinzierl - Efficient Computer Based Optimization of Thermal Management in Electronic Systems - Proceedings of Thirteen International Conference on Computer Aided Systems Theory , Las Palmas, Spanien, 2011 |
| 2011 | Validation for the Determination of Extractable Metals in Ashes from Biomass Incinerators by ICP-OES M. Kröppl, M. Zeiner, C. Lanzerstorfer - Validation for the Determination of Extractable Metals in Ashes from Biomass Incinerators by ICP-OES - Journal of Chemistry and Chemical Engineering, Vol. 5, No. 6, 2011, pp. 479-486 |
| 2011 | Heatsink design for optimal thermal management D. Hofinger, M. Jungwirth - Heatsink design for optimal thermal management - Proceedings EuroSimE 2011, Linz, Österreich, 2011, pp. 4 |
| 2011 | Comparison of sample preparation methods for the ICP-AES determination of minor and major elements in clarified apple juices I. Juranovic-Cindric, M. Zeiner, M. Kröppl, G. Stingeder - Comparison of sample preparation methods for the ICP-AES determination of minor and major elements in clarified apple juices - MICROCHEMICAL JOURNAL, Vol. 99, No. 2, 2011 |
| 2011 | A new software tool for the process engineer for the simulation of the solidification process of steel for continuous slab casting machines C. Derndorfer, G. Xia - A new software tool for the process engineer for the simulation of the solidification process of steel for continuous slab casting machines - Metec InSteelCon 2011, Düsseldorf, Deutschland, 2011, pp. 6 |
| 2011 | Einteilung erneuerbarer Rohstoffe für die Bioenergieherstellung durch grundlegende chemische Charakterisierung K. Eisenhuber, K. Krennhuber, A. Jäger - Einteilung erneuerbarer Rohstoffe für die Bioenergieherstellung durch grundlegende chemische Charakterisierung - Tagungsband FFH 2011 (5. Forschungsforum der österreichischen Fachhochschulen), Wien (Favoriten), Österreich, 2011, pp. 419-420 |
| 2011 | Production of biogas from orange peels A. Jäger, D. Steindl, V. Steinmüller - Production of biogas from orange peels - Tagungsband FFH 2011 (5. Forschungsforum der österreichischen Fachhochschulen), Wien (Favoriten), Österreich, 2011, pp. 52-53 |
| 2011 | Characterization of ashes from biomass incineration and investigation of usability M. Kröppl - Characterization of ashes from biomass incineration and investigation of usability - Phd Thesis, TU Wien / Inst. f. Chem. Tech. u. Analytik, Österreich, 2011, pp. 1-154 |
| 2011 | Inverse Dynamics and Trajectory Tracking of Underactuated Multibody Systems S. Reichl - Inverse Dynamics and Trajectory Tracking of Underactuated Multibody Systems - Phd Thesis, Technische Universität Wien, Institut für Mechanik und Mechatronik, Österreich, 2011, pp. 219 |
| 2011 | Estimates for the asymptotic convergence factor of two intervals K. Schiefermayr - Estimates for the asymptotic convergence factor of two intervals - JOURNAL OF COMPUTATIONAL AND APPLIED MATHEMATICS, Vol. 236, No. 1, 2011, pp. 28-38 |
| 2011 | High resolution X-ray computed tomography for 3D-microstructure characterisation of a cellulose particle filled polymer foam J. Kastner, R. Kickinger, D. Salaberger - High resolution X-ray computed tomography for 3D-microstructure characterisation of a cellulose particle filled polymer foam - JOURNAL OF CELLULAR PLASTICS, Vol. 47, No. 1, 2011, pp. 567-578 |
| 2011 | Phase contrast imaging with high resolution cone beam X-ray computed tomography J. Kastner, B. Plank, D. Salaberger - Phase contrast imaging with high resolution cone beam X-ray computed tomography - International Symposium on Digital Industrial Radiology and Computed Tomography 2011, Berlin, Deutschland, 2011 |
| 2011 | Simulation aided study for optimising device parameters of an industrial X-ray computed tomography system for non-destructive testing and materials characterisation M. Reiter, B. Harrer, D. Salaberger, C. Heinzl, C. Gusenbauer, C. Kuhn, J. Kastner - Simulation aided study for optimising device parameters of an industrial X-ray computed tomography system for non-destructive testing and materials characterisation - International Symposium on Digital Industrial Radiology and Computed Tomography 2011, Berlin, Deutschland, 2011 |
| 2011 | Study of heat absorption in the thermoforming process for of transparent and filled polystyrene J. F. Pühringer, G. Zitzenbacher, C. Spreitzer - Study of heat absorption in the thermoforming process for of transparent and filled polystyrene - PPS-27 (Proceedings), Marrakesh, Marokko, Marokko, 2011, pp. 118 |
| 2011 | Influence of surface roughness on the external coefficient of friction of polymer pellets in single screw plasticizing units. G. Zitzenbacher, K. Liu, C. Kneidinger - Influence of surface roughness on the external coefficient of friction of polymer pellets in single screw plasticizing units. - PPS-27 (Proceedings), Marrakesh, Marokko, Marokko, 2011, pp. 4 |
| 2011 | Study of heat transfer in dispersive mixers at high screw speeds. M. Olbrich, G. Zitzenbacher, C. Hochenauer - Study of heat transfer in dispersive mixers at high screw speeds. - PPS-27 (Proceedings), Marrakesh, Marokko, Marokko, 2011, pp. 4 |
| 2011 | Application of polymeric materials for solar thermal collectors C. Hochenauer, B. Hunter, G. Zitzenbacher, M. Danner - Application of polymeric materials for solar thermal collectors - Tagungsband FFH 2011 (5. Forschungsforum der österreichischen Fachhochschulen), Wien (Favoriten), Österreich, 2011, pp. 2 |
| 2011 | Thermal modelling of flat plate solar collectors C. Hochenauer, B. Hunter, M. Danner, G. Zitzenbacher - Thermal modelling of flat plate solar collectors - Tagungsband FFH 2011 (5. Forschungsforum der österreichischen Fachhochschulen), Wien (Favoriten), Österreich, 2011 |
| 2011 | Fast Estimation of Optimal Specimen Placements in 3D X-ray Computed Tomography C. Heinzl, J. Kastner, A. Amirkhanov, E. Gröller, C. Gusenbauer - Fast Estimation of Optimal Specimen Placements in 3D X-ray Computed Tomography - International Symposium on Digital Industrial Radiology and Computed Tomography 2011, Berlin, Deutschland, 2011 |
| 2011 | Projection-Based Metal-Artifact Reduction for Industrial 3D X-ray Computed Tomography A. Amirkhanov, C. Heinzl, M. Reiter, J. Kastner, E. Gröller - Projection-Based Metal-Artifact Reduction for Industrial 3D X-ray Computed Tomography - IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS, Vol. 17, No. 12, 2011, pp. 2193-2202 |
| 2011 | Röntgen-Computertomografie der Verformungsporen in Warmzugproben aus Baustahlbrammen M. Hochegger, B. Harrer, H. Degischer, S. Ilie - Röntgen-Computertomografie der Verformungsporen in Warmzugproben aus Baustahlbrammen - Materialographie Metalle - Keramik -Polymere, Karlsruhe, Deutschland, 2011, pp. 1-6 |
| 2011 | Zerstörungsfreie Charakterisierung von heterogenen Werkstoffen bis in den sub-µm-Bereich mittels Kegelstrahl-Röntgen-Computertomografie B. Plank, B. Harrer, D. Salaberger, J. Kastner - Zerstörungsfreie Charakterisierung von heterogenen Werkstoffen bis in den sub-µm-Bereich mittels Kegelstrahl-Röntgen-Computertomografie - Tagungsband FFH 2011 (5. Forschungsforum der österreichischen Fachhochschulen), Wien (Favoriten), Österreich, 2011, pp. 232-235 |
| 2011 | Designcontrolling-Toolbox zur Steuerung kreativer Potenziale im Produktinnovationsprozess K. Gaubinger, W. Girkinger, M. Kolar - Designcontrolling-Toolbox zur Steuerung kreativer Potenziale im Produktinnovationsprozess - Ideenmanagement, Vol. 2011, No. 3, 2011, pp. 81-86 |
| 2011 | Active thermography as a quantitative method for non-destructive evaluation of porous carbon fiber reinforced polymers G. Mayr, B. Plank, J. Sekelja, G. Hendorfer - Active thermography as a quantitative method for non-destructive evaluation of porous carbon fiber reinforced polymers - NDT & E INTERNATIONAL, Vol. 44, No. 7, 2011, pp. 537-543 |
| 2011 | A lower bound for the norm of the minimal residual polynomial K. Schiefermayr - A lower bound for the norm of the minimal residual polynomial - CONSTRUCTIVE APPROXIMATION, Vol. 33, No. 3, 2011, pp. 425-432 |
| 2011 | Model based prediction of required cut size diameter for fractionation of fly ash from a grate-fired wood chip incineration plant C. Lanzerstorfer - Model based prediction of required cut size diameter for fractionation of fly ash from a grate-fired wood chip incineration plant - FUEL PROCESSING TECHNOLOGY, Vol. 92, No. 5, 2011, pp. 1095-1100 |
| 2011 | Effiziente Berechnung von Kontaktproblemen mit lokalen Ritz-Ansatzvektoren k. sherif, W. Witteveen, H. Holl, H. Irschik, K. Mayrhofer - Effiziente Berechnung von Kontaktproblemen mit lokalen Ritz-Ansatzvektoren - Proceedings SIRM 2011, Darmstadt, Deutschland, 2011 |
| 2011 | Tools zur Qualitätsoptimierung von Gebäuden H. C. Leindecker - Tools zur Qualitätsoptimierung von Gebäuden - 13. International FM&REM Congress Proceedings, Kufstein, Österreich, 2011, pp. 101-106 |
| 2011 | Study on the Correlation of the elongation modulus at elevated temperatures and the temperature dependent flexural modulus from DMA measurements of a PP homopolymer J. F. Pühringer, C. Maier BSc, G. Zitzenbacher - Study on the Correlation of the elongation modulus at elevated temperatures and the temperature dependent flexural modulus from DMA measurements of a PP homopolymer - Advances in Polymer Science and Technology 2, Linz, Österreich, 2011, pp. 62 |
| 2011 | Entwicklung einer Methode zur Simulation von Kurzzeitwärmebehandlungen an Mikrokerbschlagproben für die Prüfung der Zähigkeit von hochfesten Schweißzusätzen T. Schlagradl, R. Schneider, G. Posch, R. Schnitzer - Entwicklung einer Methode zur Simulation von Kurzzeitwärmebehandlungen an Mikrokerbschlagproben für die Prüfung der Zähigkeit von hochfesten Schweißzusätzen - Berg- und Hüttenmännische Monatshefte, Vol. 156, No. 3, 2011, pp. 93-98 |
| 2011 | Entwicklung einer Methode zur Simulation von Kurzzeitwärmebehandlungen an Mikrokerbschlagproben für die Prüfung der Zähigkeit von hochfesten Schweißzusätzen T. Schlagradl, R. Schneider, G. Posch, R. Schnitzer - Entwicklung einer Methode zur Simulation von Kurzzeitwärmebehandlungen an Mikrokerbschlagproben für die Prüfung der Zähigkeit von hochfesten Schweißzusätzen - 18. Internationaler Studententag der Metallurgie, Leoben, Österreich, 2011, pp. 71-79 |
| 2011 | Analytisches Berechnungsmodell für die verfahrenstechnische Auslegung von Maddock- und Wendelnutenscherteilen in der Kunststoffverarbeitung G. Zitzenbacher, M. Olbrich, C. Hochenauer - Analytisches Berechnungsmodell für die verfahrenstechnische Auslegung von Maddock- und Wendelnutenscherteilen in der Kunststoffverarbeitung - Tagungsband FFH 2011 (5. Forschungsforum der österreichischen Fachhochschulen), Wien (Favoriten), Österreich, 2011, pp. 4 |
| 2011 | Digitale Shearografie & Aktive Thermografie - Neue Methoden der zerstörungsfreien Prüfung in der Luftfahrtindustrie J. Gruber, G. Mayr, G. Hendorfer, J. Sekelja, B. Plank - Digitale Shearografie & Aktive Thermografie - Neue Methoden der zerstörungsfreien Prüfung in der Luftfahrtindustrie - Tagungsband FFH 2011 (5. Forschungsforum der österreichischen Fachhochschulen), Wien (Favoriten), Österreich, 2011, pp. 248-251 |
| 2011 | Computergestützte Evaluierung des Prozessverhaltens von dispersiven Mischelementen in Einschneckenplastifiziereinheiten M. Olbrich, G. Zitzenbacher, C. Hochenauer - Computergestützte Evaluierung des Prozessverhaltens von dispersiven Mischelementen in Einschneckenplastifiziereinheiten - Tagungsband FFH 2011 (5. Forschungsforum der österreichischen Fachhochschulen), Wien (Favoriten), Österreich, 2011 |
| 2011 | Untersuchung der Eignung von Metall- Keramikpulvermischungen für generativ gefertigte Werkzeuge C. Voit, A. Huskic, Z. Simicevic - Untersuchung der Eignung von Metall- Keramikpulvermischungen für generativ gefertigte Werkzeuge - RTejournal - Forum für Rapid Technologie, Vol. 8, No. 14, 2011 |
| 2011 | Metallographische Untersuchungen zur Findung der Generierparameter einer Metall-Keramik- Mischung für das Selektives Laser Sintern (SLS) C. Voit, A. Huskic - Metallographische Untersuchungen zur Findung der Generierparameter einer Metall-Keramik- Mischung für das Selektives Laser Sintern (SLS) - Materialographie Metalle - Keramik -Polymere, Karlsruhe, Deutschland, 2011 |
| 2011 | Neubewertung potentieller Fermentations-Inhibitoren bei der Herstellung von Bioethanol der 2. Generation K. Krennhuber, A. Jäger - Neubewertung potentieller Fermentations-Inhibitoren bei der Herstellung von Bioethanol der 2. Generation - Tagungsband FFH 2011 (5. Forschungsforum der österreichischen Fachhochschulen), Wien (Favoriten), Österreich, 2011 |
| 2011 | Friction between WPC Bulk Polymers and Metal Surfaces at high pressures AND HIGH Velocity C. Kneidinger, G. Zitzenbacher, M. Olbrich, K. Steinbrecher - Friction between WPC Bulk Polymers and Metal Surfaces at high pressures AND HIGH Velocity - Symposium für Polymerblends und Nanocomposites mit biobasierten Komponenten, Halle an der Saale, Deutschland, 2011, pp. 1-9 |
| 2011 | LQG Datenbank H. C. Leindecker - LQG Datenbank - Tagungsband Thermografie Forum Eugendorf 2011, Eugendorf, Österreich, 2011, pp. 17 |
| 2011 | Optimization of a Multiphysic Device - a Comparison of a Finite-Element- and a Signal-based Simulation M. Jungwirth, B. Hansbauer BSc - Optimization of a Multiphysic Device - a Comparison of a Finite-Element- and a Signal-based Simulation - Proceedings COMSOL Conference 2011, Stuttgart, Deutschland, 2011 |
| 2011 | Comparison of Austenitic High-Mn-Steels with Different Mn- and C-Contents Regarding their Processing Properties S. Hofer, M. Hartl, G. Schestak, R. Schneider, E. Arenholz, L. Samek - Comparison of Austenitic High-Mn-Steels with Different Mn- and C-Contents Regarding their Processing Properties - Berg- und Hüttenmännische Monatshefte, Vol. 156, No. 3, 2011, pp. 99-104 |
| 2011 | Performance of Different Tool Steels for the Cutting of an CP1000 Advanced High Strength Steel J. Schneckenleitner, R. Schneider, G. Rabler, C. Walch, E. Heinl, J. Mauser, A. Hechtl - Performance of Different Tool Steels for the Cutting of an CP1000 Advanced High Strength Steel - Berg- und Hüttenmännische Monatshefte, Vol. 156, No. 3, 2011, pp. 105-111 |
| 2011 | Aufbau und Inbetriebnahme einer Versuchs-ESU-Anlage R. Schneider, A. Paar, P. Zeller, G. Reiter, W. Schützenhöfer, P. Würzinger - Aufbau und Inbetriebnahme einer Versuchs-ESU-Anlage - Berg- und Hüttenmännische Monatshefte, Vol. 156, No. 3, 2011 |
| 2011 | Comparison of Metaheuristic Algorithms for Simulation Based OPF Computation S. Hutterer, F. Auinger, M. Affenzeller - Comparison of Metaheuristic Algorithms for Simulation Based OPF Computation - Proceedings EuroSimE 2011, Linz, Österreich, 2011 |
| 2011 | Heuristic Power Scheduling of Electric Vehicle Battery Charging based on Discrete Event Simulation S. Hutterer, M. Affenzeller, F. Auinger - Heuristic Power Scheduling of Electric Vehicle Battery Charging based on Discrete Event Simulation - Extended Abstracts - 13th International Conference on Computer Aided Systems Theory, Eurocast 2011, Las Palmas de Gran Canaria, Spanien, 2011 |
| 2011 | Datenbank zur Qualitätsoptimierung von Gebäuden H. C. Leindecker - Datenbank zur Qualitätsoptimierung von Gebäuden - Tagungsband FFH 2011 (5. Forschungsforum der österreichischen Fachhochschulen), Wien (Favoriten), Österreich, 2011, pp. 276-279 |
| 2011 | Comparison of Austenitic High-Mn-Steels with Different Mn- and C-Contents Regarding their Processing Properties S. Hofer, M. Hartl, G. Schestak, R. Schneider, L. Samek, E. Arenholz - Comparison of Austenitic High-Mn-Steels with Different Mn- and C-Contents Regarding their Processing Properties - 18. Internationaler Studententag der Metallurgie, Leoben, Österreich, 2011, pp. 21-30 |
| 2011 | Influence of glass fibre content in polypropylene on the abrasion wear in a rectangular extrusion slit die B. Edlinger, G. Schaffler, C. Burgstaller, G. Zitzenbacher, C. Kneidinger - Influence of glass fibre content in polypropylene on the abrasion wear in a rectangular extrusion slit die - Advances in Polymer Science and Technology 2, Linz, Österreich, 2011, pp. 1 |
| 2011 | Influence of pellet shape and size on friction of polymer pellets in single screw plasticizing units K. Liu, G. Zitzenbacher, C. Kneidinger, D. Heim, B. Edlinger, G. Schaffler - Influence of pellet shape and size on friction of polymer pellets in single screw plasticizing units - Advances in Polymer Science and Technology 2, Linz, Österreich, 2011 |
| 2011 | A new rheological measuring die to determine the influence of the flow channel surface on wall slippage G. Metzbauer BSc, J. F. Pühringer, G. Zitzenbacher, P. Reven, C. Kneidinger, D. Heim - A new rheological measuring die to determine the influence of the flow channel surface on wall slippage - Advances in Polymer Science and Technology 2, Linz, Österreich, 2011, pp. 61 |
| 2011 | Numerical and experimental determination of the influence of dispersive mixers on single screw pressure and temperature performance M. Olbrich, G. Zitzenbacher, C. Hochenauer - Numerical and experimental determination of the influence of dispersive mixers on single screw pressure and temperature performance - Advances in Polymer Science and Technology 2, Linz, Österreich, 2011 |
| 2011 | Model-based Nonlinear Control of 2-WMR G. Grabmair - Model-based Nonlinear Control of 2-WMR - Research and Education in Robotics - EUROBOT 2011, -, Tschechische Republik, 2011 |
| 2011 | Tools zur Qualitätsoptimierung H. C. Leindecker - Tools zur Qualitätsoptimierung - Tagungsband 15.Internationale Passivhaustagung 2011, Innsbruck, Österreich, 2011, pp. 605-606 |
| 2011 | Qualitätssicherungsmaßnahmen der Innenraumluft im Passivhaus am Beispiel Radon H. C. Leindecker - Qualitätssicherungsmaßnahmen der Innenraumluft im Passivhaus am Beispiel Radon - Tagungsband 15.Internationale Passivhaustagung 2011, Innsbruck, Österreich, 2011, pp. 607-608 |
| 2011 | Yeast adaption on the substrate straw D. Steindl, H. Kahr, S. Helmberger, A. Jäger - Yeast adaption on the substrate straw - Tagungsband FFH 2011 (5. Forschungsforum der österreichischen Fachhochschulen), Wien (Favoriten), Österreich, 2011, pp. 2 |
| 2011 | Atomic force microscopy as a supporting tool in brain tumor diagnosis M. Plöderl, R. Silye, G. Zauner, S. Hutterer, K. Schilcher - Atomic force microscopy as a supporting tool in brain tumor diagnosis - Advances in Single-Molecule Research for Biology & Nanoscience, Linz, Österreich, 2011, pp. 1 |
| 2011 | Atomic force microscopy and brain tumor diagnosis M. Plöderl, R. Silye, G. Zauner, S. Hutterer, K. Schilcher - Atomic force microscopy and brain tumor diagnosis - ISPM 2011, München, Deutschland, 2011, pp. 100 |
| 2011 | Atomic Force microscopy, A New Supporting Tool in Brain Tumor Diagnosis M. Plöderl, G. Zauner, R. Silye, S. Hutterer, K. Schilcher - Atomic Force microscopy, A New Supporting Tool in Brain Tumor Diagnosis - Nanoscale 2011, Santa Barbara, Vereinigte Staaten von Amerika, 2011, pp. 82 |
| 2011 | The Use of a High Temperature Wind Tunnel for MT-SOFC Testing---Part II: Use of Computational Fluid Dynamics Software in Order to Study Previous Measurements V. Lawlor , C. Hochenauer, S. Griesser, G. Zauner, G. Buchinger, D. Meissner, A. Olabi, K. Klein, S. Kuehn, S. Cordiner, A. Mariani - The Use of a High Temperature Wind Tunnel for MT-SOFC Testing---Part II: Use of Computational Fluid Dynamics Software in Order to Study Previous Measurements - Journal of Fuel Cell Science and Technology, Vol. 8, No. 6, 2011, pp. 1019-1031 |
| 2011 | Simulations-basiertes heuristisches Sampling zur Integration erzeuger- und verbraucherseitiger unsicherer Einflüsse S. Hutterer, F. Auinger, M. Affenzeller - Simulations-basiertes heuristisches Sampling zur Integration erzeuger- und verbraucherseitiger unsicherer Einflüsse - ComForEn 2011 - Kommunikation für Energienetze der Zukunft, Wels, Österreich, 2011 |
| 2011 | Cationic amphipathic peptides accumulate sialylated proteins and lipids in the plasma membrane of eukaryotic host cells J. Weghuber - Cationic amphipathic peptides accumulate sialylated proteins and lipids in the plasma membrane of eukaryotic host cells - BIOCHIMICA ET BIOPHYSICA ACTA-BIOMEMBRANES, Vol. 1808, No. 10, 2011, pp. 2581-2590 |
| 2011 | Adjuvating the adjuvant: facilitated delivery of an immunomodulatory oligonucleotide to TLR9 by a cationic antimicrobial peptide in dendritic cells J. Weghuber - Adjuvating the adjuvant: facilitated delivery of an immunomodulatory oligonucleotide to TLR9 by a cationic antimicrobial peptide in dendritic cells - VACCINE, Vol. 29, No. 3, 2011, pp. 426-436 |
| 2011 | Wheeled Mobile Autonomous Robot for Eurobot 2011 R. Edlinger, M. Zauner, W. Rokitansky - Wheeled Mobile Autonomous Robot for Eurobot 2011 - 2nd International Conference on Robotics in Education, Vienna, Österreich, 2011, pp. 147-150 |
| 2011 | Electronic Platform for Small Robots in Education M. Zauner, R. Edlinger, W. Rokitansky - Electronic Platform for Small Robots in Education - 2nd International Conference on Robotics in Education, Vienna, Österreich, 2011, pp. 125-128 |
| 2011 | High resolution cone beam X-ray computed tomography of 3D-microstructures of cast Al-alloys J. Kastner, B. Harrer, H. Degischer - High resolution cone beam X-ray computed tomography of 3D-microstructures of cast Al-alloys - MATERIALS CHARACTERIZATION, Vol. 62, No. 1, 2011, pp. 99-107 |
| 2011 | Inverse polynomial images and inequalities for polynomials minimal with respect to the maximum norm K. Schiefermayr - Inverse polynomial images and inequalities for polynomials minimal with respect to the maximum norm - Habilitation Thesis, Johannes Kepler Universität Linz, Österreich, 2011 |
| 2011 | Determination of the leaching yield of selected elements from wood ashes M. Kröppl, T. Pullisaar, C. Lanzerstorfer, M. Zeiner - Determination of the leaching yield of selected elements from wood ashes - Proceedings CEBC 2011, Graz, Österreich, 2011, pp. 160 |
| 2011 | Area wise application of contact constraints in reduced mechanical systems W. Witteveen - Area wise application of contact constraints in reduced mechanical systems - Proceedings of IMAC XXIX, Jacksonville, Florida, Vereinigte Staaten von Amerika, 2011 |
| 2011 | POD based computation of Joint Interface Modes W. Witteveen, K. Sherif - POD based computation of Joint Interface Modes - Proceedings of IMAC XXIX, Jacksonville, Florida, Vereinigte Staaten von Amerika, 2011 |
| 2011 | X-ray Microtomography: characterisation of structures and defect analysis B. Harrer, J. Kastner - X-ray Microtomography: characterisation of structures and defect analysis in Fabrication and Characterization in the Micro-Nano Range - Springer Verlag, 2011, pp. 119-150 |
| 2011 | Strahlungsabsorption von Polystyrol-Halbzeugen im Thermoformprozess J. F. Pühringer, G. Zitzenbacher, C. Spreitzer - Strahlungsabsorption von Polystyrol-Halbzeugen im Thermoformprozess - Tagungsband FFH 2011 (5. Forschungsforum der österreichischen Fachhochschulen), Wien (Favoriten), Österreich, 2011, pp. 300-301 |
| 2010 | Lean-Innovation-Toolbox für technologieorientierte KMU K. Gaubinger, W. Girkinger - Lean-Innovation-Toolbox für technologieorientierte KMU - Tagungsband des 4. Forschungsforums der österreichischen Fachhochschulen, Pinkafeld, Österreich, 2010, pp. 186-191 |
| 2010 | Implementierung eines Produktmanagement-Benchmarkingsystems für Industriegüterunternehmen K. Gaubinger, M. Rabl, F. Schweitzer - Implementierung eines Produktmanagement-Benchmarkingsystems für Industriegüterunternehmen - Tagungsband des 4. Forschungsforum der österreichischen Fachhochschulen, Pinkafeld, Österreich, 2010, pp. 198-203 |
| 2010 | Produktmanagement Implementierungsleitfaden für mittelständisch strukturierte Industriegüterunternehmen H. Freudenthaler, K. Gaubinger - Produktmanagement Implementierungsleitfaden für mittelständisch strukturierte Industriegüterunternehmen - Tagungsband des 4. Forschungsforum der österreichischen Fachhochschulen, Pinkafeld, Österreich, 2010, pp. 487-488 |
| 2010 | Thermographische Materialprüfung an Bauteilen aus der Flugzeugindustrie G. Hendorfer - Thermographische Materialprüfung an Bauteilen aus der Flugzeugindustrie in Energieeffiziente Mobilität - Shaker Verlag, 2010 |
| 2010 | Subsurface Defect Characterization in Pulsed Thermography by Means of Wavelet Analysis G. Zauner, G. Mayr, G. Hendorfer - Subsurface Defect Characterization in Pulsed Thermography by Means of Wavelet Analysis - 2nd Int. Symposium on NDT in Aerospace, Hamburg, D, Deutschland, 2010 |
| 2010 | Stroh zu Gas A. Jäger - Stroh zu Gas - Bauernzeitung , Vol. 61, No. 16, 2010, pp. 63-64 |
| 2010 | Konzept zum Einsatz von Stroh in Biogasanlagen C. Lanzerstorfer, A. Jäger, A. Eder - Konzept zum Einsatz von Stroh in Biogasanlagen - Proceedings Fachhochschulkonferenz 2010, Pinkafeld, Österreich, 2010, pp. 271-276 |
| 2010 | Extraction of nutrients from biomass ashes with varying extraction times M. Kröppl, C. Lanzerstorfer, M. Zeiner - Extraction of nutrients from biomass ashes with varying extraction times - Proceedings 1st International Conference on Processing Technologies for the Forest and Biobased Products Industries, Kuchl, Österreich, 2010, pp. 135-139 |
| 2010 | Chancen und Potenziale der Bioethanolproduktion aus Stroh A. Jäger, H. Kahr, A. Eder, S. Helmberger, C. Lanzerstorfer - Chancen und Potenziale der Bioethanolproduktion aus Stroh - Proceedings 11. Symposium Energieinnovation, Graz, Österreich, 2010 |
| 2010 | Bioethanol als Kraftstoff in Österrreich H. Kahr, S. Helmberger, A. Jäger - Bioethanol als Kraftstoff in Österrreich in Energieeffiziente Mobilität - Shaker Verlag, 2010, pp. 15-24 |
| 2010 | Industrielle Einsetzbarkeit automatisch generiertem Steuerungscodes aus Matlab/Simulink Modellen am Beispiel eines komplexen Satellitenteststendes F. Auinger, R. Froschauer - Industrielle Einsetzbarkeit automatisch generiertem Steuerungscodes aus Matlab/Simulink Modellen am Beispiel eines komplexen Satellitenteststendes - Industrielles Symposium Mechatronik 2010, Linz, Österreich, 2010, pp. 63-76 |
| 2010 | OPTIMIERUNG VON HEFESTÄMMEN ZUR ETHANOL-PRODUKTION DER 2. GENERATION A. Jäger, S. Helmberger, H. Kahr - OPTIMIERUNG VON HEFESTÄMMEN ZUR ETHANOL-PRODUKTION DER 2. GENERATION - Proceedings 11. Symposium Energieinnovation, Graz, Österreich, 2010 |
| 2010 | Determination of Copper in Clarified Apple Juices M. Zeiner, I. Juranovic-Cindric, M. Kröppl, G. Stingeder - Determination of Copper in Clarified Apple Juices - JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY, Vol. 58, No. 6, 2010, pp. 3617-3620 |
| 2010 | Biogas Production and Its Use as Local “(Bio-)gas Fuel Station A. Jäger, A. Eder, H. Kahr, P. Lanzerstorfer - Biogas Production and Its Use as Local “(Bio-)gas Fuel Station in Energieeffiziente Mobilität - Shaker Verlag, 2010, pp. 25-35 |
| 2010 | Energie sparen durch Simulation M. Jungwirth, W. Baumgartinger, M. Kaltenbacher - Energie sparen durch Simulation in Energieeffiziente Mobilität - Shaker Verlag, 2010, pp. 45-54 |
| 2010 | Evaluierung von FlexRay zur Vernetzung industrieller Automatisierungssysteme R. Froschauer - Evaluierung von FlexRay zur Vernetzung industrieller Automatisierungssysteme - Industrielles Symposium Mechatronik 2010, Linz, Österreich, 2010, pp. 5 |
| 2010 | Untersuchung der Vorhydrolyse von Lignocelluloserohstoffen mittels Steam Explosion J. Lindorfer, H. Steinmüller, A. Jäger, A. Eder - Untersuchung der Vorhydrolyse von Lignocelluloserohstoffen mittels Steam Explosion - CHEMIE INGENIEUR TECHNIK, Vol. 82, No. 8, 2010, pp. 1169-1176 |
| 2010 | Qualitätsoptimierung durch Nutzerzufriedenheit H. C. Leindecker - Qualitätsoptimierung durch Nutzerzufriedenheit - Proceedings of e-nova 2010, Pinkafeld, Österreich, 2010, pp. 215-220 |
| 2010 | Simulation und Prozessbeschreibung beim Thermoformen von Kunststoffen J. F. Pühringer, G. Zitzenbacher - Simulation und Prozessbeschreibung beim Thermoformen von Kunststoffen - Tagungsband des 4. Forschungsforum der österreichischen Fachhochschulen, Pinkafeld, Österreich, 2010, pp. 298-303 |
| 2010 | Deposition of N, F and O-doped Amorphous Carbon-Silicon Coatings in an Industrial DC-PACVD-System D. Heim, C. Forsich, T. Müller, A. Gebeshuber - Deposition of N, F and O-doped Amorphous Carbon-Silicon Coatings in an Industrial DC-PACVD-System - 12th International Conference on Plasma Surface Engineering, Garmisch-Partenkirchen, Deutschland, 2010 |
| 2010 | Comparative Visualization for Parameter Studies of Dataset Series C. Heinzl, M. M. Malik, E. Gröller - Comparative Visualization for Parameter Studies of Dataset Series - IEEE Transactions on Visualization and Computer Graphics (TVCG), Vol. 16, No. 5, 2010, pp. 8 |
| 2010 | Monitoring und Controlling von Photovoltaik-Anlagen H. C. Leindecker, D. Neyer, F. Vilsecker, S. Schinnerl - Monitoring und Controlling von Photovoltaik-Anlagen - 12. International FM & REM Congress Proceedings, Kufstein, Österreich, 2010, pp. 242-247 |
| 2010 | The Use of a High Temperature Wind Tunnel for MT-SOFC Testing---Part I: Detailed Experimental Temperature Measurement of an MT-SOFC Using an Avant-Garde High Temperature Wind Tunnel and Various Measurement Techniques V. Lawlor, G. Zauner, C. Hochenauer, A. Mariani, S. Griesser, J. Carton, K. Klein, S. Kuehn, A. Olabi, S. Cordiner, D. Meissner, G. Buchinger - The Use of a High Temperature Wind Tunnel for MT-SOFC Testing---Part I: Detailed Experimental Temperature Measurement of an MT-SOFC Using an Avant-Garde High Temperature Wind Tunnel and Various Measurement Techniques - Journal of Fuel Cell Science and Technology, Vol. 7, No. 6, 2010, pp. 1016-1023 |
| 2010 | Hochhaus-Sanierung zum Passivhaus H. C. Leindecker - Hochhaus-Sanierung zum Passivhaus - Tagungsband FFH 2010, Pinkafeld, Österreich, 2010, pp. 503-504 |
| 2010 | The Use of CFD to Investigate the Properties of MT-SOFCs with Various Fuel & Oxidant Manifolding Techniques. V. Lawlor, C. Hochenauer, A. Mariani, S. Griesser, S. Kuehn, K. Klein, A. Olabi, J. Carton, M. Olbrich, S. Cordiner, D. Meissner, G. Buchinger - The Use of CFD to Investigate the Properties of MT-SOFCs with Various Fuel & Oxidant Manifolding Techniques. - SEEP2010, Bari Italy, Italien, 2010, pp. 10 |
| 2010 | Biomass ashes - Distribution of plant nutrients in the different ash fractions M. Kröppl, C. Lanzerstorfer - Biomass ashes - Distribution of plant nutrients in the different ash fractions - EMEC 11, Portoroz, Slowenien, 2010, pp. 141 |
| 2010 | Field Experience with GPS based Train Control System B. Stadlmann, S. Mairhofer, G. Hanis - Field Experience with GPS based Train Control System - Proceedings ENC-GNSS 2010, Braunschweig, Deutschland, 2010, pp. 7 |
| 2010 | Hurt yourself to hurt your enemy: new insights on the function of the bizarre antipredator mechanism in the salamandrid Pleurodeles waltl E. Heiss, D. Salaberger - Hurt yourself to hurt your enemy: new insights on the function of the bizarre antipredator mechanism in the salamandrid Pleurodeles waltl - JOURNAL OF ZOOLOGY, Vol. 280, No. 2, 2010, pp. 156-162 |
| 2010 | Amorphous carbon-silicon-coatings on nitrided and post-oxidized steels deposited by DC-PACVD D. Heim, C. Forsich, C. Übleis, A. Gebeshuber, T. Müller - Amorphous carbon-silicon-coatings on nitrided and post-oxidized steels deposited by DC-PACVD - 1st Austrian Symposium on Carbon Based, Leoben, Österreich, 2010 |
| 2010 | Upscaling of an a-C:H:Si Triplex Process in an Industrial DC PACVD System C. Forsich, D. Heim, T. Müller, A. Gebeshuber - Upscaling of an a-C:H:Si Triplex Process in an Industrial DC PACVD System - 37th International Conference on Metallurgical Coatings and Thin Films, San Diego, Vereinigte Staaten von Amerika, 2010 |
| 2010 | Morphological characterization of the human corpus callosum using AFM M. Plöderl, R. Silye, G. Zauner, K. Schilcher - Morphological characterization of the human corpus callosum using AFM - Advances in Single-Molecule Research for Biology & Nanoscience , Linz, Österreich, 2010 |
| 2010 | Video Aided E-Learning: Maximizing the Benefits J. D. Hallewell Haslwanter, F. Daschil, C. Derndorfer - Video Aided E-Learning: Maximizing the Benefits - Proceedings of the International Conference on Interactive Computer-Aided Learning (ICL 2010), Hasselt, Belgien, 2010, pp. 440-449 |
| 2010 | Overview: A Simulation Based Metaheuristic Optimization Approach to Optimal Power Dispatch Related to Smart Electric Grids S. Hutterer, F. Auinger, M. Affenzeller, G. Steinmauerer - Overview: A Simulation Based Metaheuristic Optimization Approach to Optimal Power Dispatch Related to Smart Electric Grids - Life System Modeling and Intelligent Computing (LNCS 6329), Wuxi, China, 2010 |
| 2010 | Hocheffiziente Berücksichtigung des Kontaktes von FEM-Modellen in der Mehrkörpersimulation M. Breitfuss, H. Dannbauer, W. Witteveen - Hocheffiziente Berücksichtigung des Kontaktes von FEM-Modellen in der Mehrkörpersimulation - Tagungsband SIMVEC 2010, Baden Baden, Germany, Deutschland, 2010 |
| 2010 | Regelung des Bandlaufes im Einlaufspeicher einer Beizanlage M. Egger, K. Ardreas Clemens - Regelung des Bandlaufes im Einlaufspeicher einer Beizanlage - Stahl und Eisen, Vol. 130, No. 9, 2010, pp. 77-83 |
| 2010 | Rolling Friction of Low Resistance Tires M. Egger - Rolling Friction of Low Resistance Tires - SAE 2101, Linz, Österreich, 2010 |
| 2010 | Inverse Computations of Causative Vibrations in an AOD Converter S. Reichl, G. Wimmer, T. Reiter, M. Egger, W. Steiner - Inverse Computations of Causative Vibrations in an AOD Converter - Technical Report, Simulia, Österreich, 2010 |
| 2010 | Untersuchung des Zinkabriebs beim Tiefziehen von verzinkten Feinblechen M. Kendel, A. Huskic - Untersuchung des Zinkabriebs beim Tiefziehen von verzinkten Feinblechen - 29. Verformungskundliches Kolloquium, Planneralm, Österreich, 2010, pp. 97-102 |
| 2010 | Monte Carlo Simulation for the evaluation of various influence factor for on projections in computed tomography M. Reiter, M. Mantler, B. Chyba - Monte Carlo Simulation for the evaluation of various influence factor for on projections in computed tomography - Powder Diffraction Journal Vol. 25, Vol. 25, No. 2, 2010 |
| 2010 | Produktdesign in Investitionsgütermärkten: Quantifizierung des Nutzens anhand direkter Nutzenstiftung beim Endkunden M. Kretschmer, K. Gaubinger, F. Schweitzer - Produktdesign in Investitionsgütermärkten: Quantifizierung des Nutzens anhand direkter Nutzenstiftung beim Endkunden - Design - Kosten und Nutzen, Dresden, Deutschland, 2010 |
| 2010 | Energieeffiziente Mobilität J. Kastner, G. Zauner, T. Kern, L. Höfler - Energieeffiziente Mobilität in Energieeffiziente Mobilität - Shaker Verlag, 2010 |
| 2010 | Model-Driven Engineering of Networked Industrial Automation Systems M. Wenger, R. Froschauer, M. Rooker, G. Ebenhofer, A. Zoitl, T. Strasser - Model-Driven Engineering of Networked Industrial Automation Systems - Proc. of 8th IEEE Conference on Industrial Informatics (INDIN'10), Osaka, Japan, 2010 |
| 2010 | Model-Driven Communication Routing in Industrial Automation and Control Systems A. Schimmel, A. Schimmel, M. Rooker, A. Zoitl, G. Ebenhofer - Model-Driven Communication Routing in Industrial Automation and Control Systems - Proc. of 8th IEEE Conference on Industrial Informatics (INDIN'10), Osaka, Japan, 2010 |
| 2010 | Simulating Evolution in Model-based Product Line Engineering W. Heider, R. Froschauer, P. Grünbacher, R. Rabiser, D. Dhungana - Simulating Evolution in Model-based Product Line Engineering - INFORMATION AND SOFTWARE TECHNOLOGY, Vol. 52, No. 7, 2010 |
| 2010 | Geometric properties of inverse polynomial images K. Schiefermayr - Geometric properties of inverse polynomial images - PROCEEDINGS APPROXIMATION THEORY, San Antonio, Texas, Vereinigte Staaten von Amerika, 2010, pp. 277-287 |
| 2010 | Simulationsbasiertes Design von Energieversorgungssystemen M. Jungwirth, D. Hofinger - Simulationsbasiertes Design von Energieversorgungssystemen - Industrielles Symposium Mechatronik 2010, Linz, Österreich, 2010, pp. 258-263 |
| 2010 | A Comparison of Model Order Reduction Methods used in different FE Software Tools M. Jungwirth, D. Hofinger, H. Weinzierl - A Comparison of Model Order Reduction Methods used in different FE Software Tools - Proceedings EUROSIME 2010, Bordeaux, France, Frankreich, 2010, pp. 5 |
| 2010 | Multiphysikalische Simulation eines Kühlsystems mit MATLAB H. Fenzl, A. Eder, M. Jungwirth - Multiphysikalische Simulation eines Kühlsystems mit MATLAB - Industrielles Symposium Mechatronik 2010, Linz, Österreich, 2010, pp. 107 |
| 2010 | Industrielle Computertomografie J. Kastner - Industrielle Computertomografie - Industrielle Computertomografie 2010, Wels, Österreich, 2010 |
| 2010 | FRONTICS - A Communication Framework for Networked Automation and Control Systems R. Froschauer, A. Zoitl, M. Rooker - FRONTICS - A Communication Framework for Networked Automation and Control Systems - Proc. of the 10th IFAC Workshop on Intelligent Manufacturing Systems, Lisbon, Spanien, 2010 |
| 2010 | Porositätsbestimmung in kohlefaserverstärkten Kunststoffen mittels Röntgen-Computertomografie B. Plank, J. Kastner, J. Sekelja, D. Salaberger - Porositätsbestimmung in kohlefaserverstärkten Kunststoffen mittels Röntgen-Computertomografie - Tagungsband des 4. Forschungsforum der österreichischen Fachhochschulen, Pinkafeld, Österreich, 2010, pp. 321-328 |
| 2010 | Methode zur 3D Charakterisierung von Fasern in verstärkten Polymeren D. Salaberger, K. Arunachalam Kannappan, J. Kastner - Methode zur 3D Charakterisierung von Fasern in verstärkten Polymeren - Industrielle Computertomografie 2010, Wels, Österreich, 2010, pp. 51-58 |
| 2010 | Optimal Control Methods for the Computation of Excitation Signals in Multibody Systems S. Reichl, W. Steiner, M. Steinbatz - Optimal Control Methods for the Computation of Excitation Signals in Multibody Systems - 1st Joint International Conference on Multibody System Dynamics, Lappeenranta, Finnland, 2010, pp. 10 |
| 2010 | Inegration von Leichtbau-Berechnungsmethoden in die Produktentwicklung von Landmaschinen S. Reichl, W. Steiner, M. Steinbatz, M. Hofer - Inegration von Leichtbau-Berechnungsmethoden in die Produktentwicklung von Landmaschinen in Energieeffiziente Mobilität - Shaker Verlag, 2010, pp. 141-149 |
| 2010 | Untersuchung und Evaluierung von Gleichstromunterbrecherprinzipien im Bereich Elektromobilität W. Hauer, P. Zeller - Untersuchung und Evaluierung von Gleichstromunterbrecherprinzipien im Bereich Elektromobilität in Energieeffiziente Mobilität - Shaker Verlag, 2010, pp. 62-71 |
| 2010 | Optimales Scheduling von Ladevorgängen einer E-Flotte S. Hutterer, F. Auinger - Optimales Scheduling von Ladevorgängen einer E-Flotte in Energieeffiziente Mobilität - Shaker Verlag, 2010, pp. 36-44 |
| 2010 | Mechanical Design and System Architecture of a Tracked Vehicle Robot for Urban Search and Rescue Operations R. Edlinger, M. Zauner - Mechanical Design and System Architecture of a Tracked Vehicle Robot for Urban Search and Rescue Operations in Lecture Notes in Communications in Computer and Information Science (CCIS) - Springer Verlag, 2010, pp. 12 |
| 2010 | Simulationsbasierte Optimierung mit Metaheuristiken für Optimale Leistungsverteilung im Rahmen von Smart Electric Grids S. Hutterer, M. Affenzeller - Simulationsbasierte Optimierung mit Metaheuristiken für Optimale Leistungsverteilung im Rahmen von Smart Electric Grids in Energieeffiziente Mobilität - Shaker Verlag, 2010, pp. 75-82 |
| 2010 | A Modular and Scalable Electronic System for Mobile and Autonomous Robots M. Zauner, R. Edlinger - A Modular and Scalable Electronic System for Mobile and Autonomous Robots in Lecture Notes in Communications in Computer and Information Science (CCIS) - Springer Verlag, 2010, pp. 9 |
| 2010 | ROBOT EXPLORATION CONTROLLED BY MODULAR ELECTRONIC SYSTEM WITH COMMUNICATION TO THE 2D-MAPPING R. Edlinger, M. Zauner - ROBOT EXPLORATION CONTROLLED BY MODULAR ELECTRONIC SYSTEM WITH COMMUNICATION TO THE 2D-MAPPING - Österreichische Computer Gesellschaft, Vol. 36, No. 2010, 2010, pp. 7 |
| 2010 | Simulative Parameteroptimierung für Metrologie an Multi-Materialbauteilen mit industrieller Röntgen Computertomografie M. Reiter, C. Heinzl, D. Salaberger, D. Weiss, J. Kastner - Simulative Parameteroptimierung für Metrologie an Multi-Materialbauteilen mit industrieller Röntgen Computertomografie - Proceedings Industrielle Computertomografie Fachtagung 2010, Wels, Österreich, 2010, pp. 163-173 |
| 2010 | Energy Yields of Photovoltaics compared to Small Wind Turbines C. Hochenauer, G. Gahleitner - Energy Yields of Photovoltaics compared to Small Wind Turbines - Energy Yields of Photovoltaics compared to Small Wind Turbines, Bari, Italien, 2010 |
| 2010 | Porositätsbestimmung in der Flugzeugindustrie mittels Röntgen-Computertomografie B. Plank, J. Sekelja, G. Mayr, J. Kastner - Porositätsbestimmung in der Flugzeugindustrie mittels Röntgen-Computertomografie - Proceedings Industrielle Computertomografie Fachtagung 2010, Wels, Österreich, 2010, pp. 25-34 |
| 2010 | Anwendung der Sub-µm CT zur Charakterisierung von Holzwerkstoffen G. Standfest, S. Kranzer, B. Plank, A. Petutschnigg, M. Dunky - Anwendung der Sub-µm CT zur Charakterisierung von Holzwerkstoffen - Proceedings Industrielle Computertomografie Fachtagung 2010, Wels, Österreich, 2010, pp. 65-70 |
| 2010 | High Resolution X-ray CT for Polymer Materials Science B. Plank, D. Salaberger, J. Kastner - High Resolution X-ray CT for Polymer Materials Science - 2nd Int. Symposium on NDT in Aerospace, Hamburg, D, Deutschland, 2010, pp. 3 |
| 2010 | Sub-Mikrometer-Computertomographie für die Charakterisierung von Holzwerkstoffen G. Standfest, D. Salaberger, B. Plank, A. Petutschnigg, M. Dunky - Sub-Mikrometer-Computertomographie für die Charakterisierung von Holzwerkstoffen - Holztechnologie, Vol. 51, No. 4, 2010, pp. 44-49 |
| 2010 | 3D Microstructure Characterization of Wood Based Panels G. Standfest, S. Kranzer, D. Salaberger, B. Plank, A. Petutschnigg, M. Dunky - 3D Microstructure Characterization of Wood Based Panels - Proceedings 1st International Conference on Processing Technologies for the Forest and Biobased Products Industries, Kuchl, Österreich, 2010, pp. 6 |
| 2010 | Comparative study of high resolution cone beam X-ray computed tomography methods and discussion of temperature influence on Nanotom stability D. Salaberger, B. Plank, B. Harrer, J. Kastner, O. Brunke, H. Degischer - Comparative study of high resolution cone beam X-ray computed tomography methods and discussion of temperature influence on Nanotom stability - Book of Abstracts: High Resolution X-ray CT Symposium, Dresden, Deutschland, 2010, pp. 37 |
| 2010 | Lebenszyklusanalyse eines Gebäudes T. Schrag, H. C. Leindecker, C. Wartha, W. Gollner, E. Heiduk, E. Stocker, S. Schinnerl - Lebenszyklusanalyse eines Gebäudes - Proceedings FFH 2010, Pinkafeld, Österreich, 2010, pp. 263-270 |
| 2010 | Development of a Plastic Solar Thermal Collector C. Hochenauer, G. Zitzenbacher, M. Danner, B. Hunter, P. Orgill - Development of a Plastic Solar Thermal Collector - PMI 2010 conference book, Ghent, Belgien, 2010, pp. 8 |
| 2010 | Ermittlung der tribologischen Eigenschaften von Kunststoffgranulaten in Plastifiziersystemen für die Kunststoffverarbeitung C. Kneidinger, G. Zitzenbacher, A. Kögler - Ermittlung der tribologischen Eigenschaften von Kunststoffgranulaten in Plastifiziersystemen für die Kunststoffverarbeitung - Proceedings FFH 2010, Pinkafeld, Österreich, 2010, pp. 522-523 |
| 2010 | Study on parameter variation of an industrial computed tomography simulation tool concerning dimensional measurement deviations M. Reiter, C. Heinzl, D. Salaberger, D. Weiss, J. Kastner - Study on parameter variation of an industrial computed tomography simulation tool concerning dimensional measurement deviations - Proc. of 10th European Conference on Non-Destructive Testing, Moskau, Russland, 2010 |
| 2010 | Bildgebende Methode zur Bestimmung der optischen Konstanten von dünnen Schichten bei hohen Temperaturen durch Analyse der thermischen Strahlungsemission G. Zauner, G. Hendorfer - Bildgebende Methode zur Bestimmung der optischen Konstanten von dünnen Schichten bei hohen Temperaturen durch Analyse der thermischen Strahlungsemission - Proceedings FFH 2010, Pinkafeld, Österreich, 2010 |
| 2010 | Optical characterization of growing thin films at hight temperatures by analysis of near infrared emissivity variations using CCD thermal imaging G. Zauner, G. Hendorfer - Optical characterization of growing thin films at hight temperatures by analysis of near infrared emissivity variations using CCD thermal imaging - Proceedings of QIRT 2010, Quebec, Kanada, 2010 |
| 2010 | Saliera - Das Salzfass von Benvenuto Cellini M. Reiter, J. Kastner - Saliera - Das Salzfass von Benvenuto Cellini - Report, FH OÖ Fakultät Wels, Österreich, 2010, pp. 81 |
| 2010 | Effect of Recession on Consumer Attitudes towards Environmentally-Friendly Products F. Schweitzer, M. Kwong, K. Gaubinger - Effect of Recession on Consumer Attitudes towards Environmentally-Friendly Products - Proceedings of the 2010 Global Marketing Conference at Tokyo, Tokio, Japan, 2010, pp. 717-718 |
| 2010 | CT Data Evaluation of Fibre Reinforced Polymers to Determine Fibre Length Distribution D. Salaberger, K. Arunachalam Kannappan, J. Kastner, J. Reussner, T. Auinger - CT Data Evaluation of Fibre Reinforced Polymers to Determine Fibre Length Distribution - PPS26-2010, Banff, Canada, Kanada, 2010 |
| 2010 | Cálirea În Suprafatá A Otelurilor De Prelucrári La Rece-O Alternativá De Treatment Terminc Cu Deformare Minimá Si Economii De Energie? R. Schneider, C. Schüller - Cálirea În Suprafatá A Otelurilor De Prelucrári La Rece-O Alternativá De Treatment Terminc Cu Deformare Minimá Si Economii De Energie? - Proceedings of the International Conference on Reduction Of Energy Consumption In Heat And Thermochemical Treatment Technologies And Installations, Poiana Brasov, Rumänien, 2010, pp. 36-48 |
| 2010 | Untersuchung einer silbertauschierten Gürtelschnalle aus Mautern auf technischer Basis S. Müller, D. Salaberger - Untersuchung einer silbertauschierten Gürtelschnalle aus Mautern auf technischer Basis - Archäologie Österreichs, Vol. 21, No. 1, 2010, pp. 60-65 |
| 2010 | Computed Tomography and Pulsed Thermography of Carbon Reinforced CARBON/COPPER Components for Thermonuclear Fusion J. Kastner, B. Harrer, H. Traxler - Computed Tomography and Pulsed Thermography of Carbon Reinforced CARBON/COPPER Components for Thermonuclear Fusion - Proc. of 10th European Conference on Non-Destructive Testing, Moskau, Russland, 2010 |
| 2010 | Structural Analysis of Polymeric Foams by Sub-µm X-RAY Computed Tomogaphy J. Kastner, D. Salaberger, R. Kickinger - Structural Analysis of Polymeric Foams by Sub-µm X-RAY Computed Tomogaphy - Proc. of 10th European Conference on Non-Destructive Testing, Moskau, Russland, 2010 |
| 2010 | Uncertainty Visualization of Computed Tomography Datasets from Industrial Components C. Heinzl, J. Kastner, E. Gröller - Uncertainty Visualization of Computed Tomography Datasets from Industrial Components - Proc. of 10th European Conference on Non-Destructive Testing, Moskau, Russland, 2010 |
| 2010 | Microfocus Computed X-ray Tomography of Segragations in High Strength Aluminium Alloys B. Harrer, J. Kastner, H. Degischer - Microfocus Computed X-ray Tomography of Segragations in High Strength Aluminium Alloys - Proc. of 10th European Conference on Non-Destructive Testing, Moskau, Russland, 2010 |
| 2010 | Comparative study of micro- and Sub-µm computed tomography with synchrotron tomography applied to Fe- and Al-alloys J. Kastner, B. Harrer, G. Requena, O. Brunke - Comparative study of micro- and Sub-µm computed tomography with synchrotron tomography applied to Fe- and Al-alloys - NDT & E INTERNATIONAL, Vol. 43, No. 10, 2010, pp. 599-605 |
| 2010 | Artefaktreduktion mittels Dual Viewing für Röntgencomputertomographie von Multimaterialbauteilen C. Heinzl, M. Reiter, J. Kastner, E. Gröller - Artefaktreduktion mittels Dual Viewing für Röntgencomputertomographie von Multimaterialbauteilen - DGZFP-Jahrestagung 2010, Erfurt, Deutschland, 2010 |
| 2010 | VALU: Video Aided E-Learning and Understanding J. D. Hallewell Haslwanter, F. Daschil, C. Derndorfer, T. Koniarek - VALU: Video Aided E-Learning and Understanding - Tagungsband Internationales Forum Mechatronik 2010, Winterthur, Schweiz, 2010 |
| 2010 | Radial shrinkage and ultrasound acoustic emissions of fresh versus pre-dried Norway spruce sapwood S. Rosner, J. Konnerth, B. Plank, D. Salaberger, C. Hansmann - Radial shrinkage and ultrasound acoustic emissions of fresh versus pre-dried Norway spruce sapwood - TREES-STRUCTURE AND FUNCTION, Vol. 24, No. 5, 2010, pp. 931-940 |
| 2010 | Thermal wave interference A. Gleiter, G. Mayr - Thermal wave interference - INFRARED PHYSICS & TECHNOLOGY, Vol. 53, No. 4, 2010, pp. 288-291 |
| 2010 | Characterization of defects in curved carbon fiber reinforced plastics using pulsed thermography G. Mayr, G. Hendorfer - Characterization of defects in curved carbon fiber reinforced plastics using pulsed thermography - Quantitative InfraRed Thermography Journal, Vol. 7, No. 1, 2010, pp. 3-16 |
| 2010 | Porosity Determination by Pulsed Thermography in Reflection Mode G. Mayr, G. Hendorfer - Porosity Determination by Pulsed Thermography in Reflection Mode - Proceedings of QIRT 2010, Quebec, Kanada, 2010, pp. 933-940 |
| 2010 | Thermographische Untersuchungen an metallischen Proben in Kombination mit induktiver Erwärmung G. Hendorfer, G. Mayr, F. Puchberger, B. Harrer - Thermographische Untersuchungen an metallischen Proben in Kombination mit induktiver Erwärmung - Industrielles Symposium Mechatronik 2010, Linz, Österreich, 2010, pp. 47-57 |
| 2010 | Efficient Topology Optimization of Large Dynamic Finite Element Systems Using Fatigue K. Sherif, W. Witteveen, K. Puchner, H. Irschik - Efficient Topology Optimization of Large Dynamic Finite Element Systems Using Fatigue - AIAA Journal, Vol. 48, No. 7, 2010, pp. 1339-1347 |
| 2010 | Computation of Distributed Forces in Modally Reduced Mechanical Systems W. Witteveen - Computation of Distributed Forces in Modally Reduced Mechanical Systems - Proceedings of IMAC XXVIII, Society of Experimental Mechanics Inc., Jacksonville, Florida, Vereinigte Staaten von Amerika, 2010 |
| 2010 | Metal & reticulated vitreous carbon foams as bipolar flow plate material for proton exchange membrane fuel cells J. Carton, A. Olabi, V. Lawlor - Metal & reticulated vitreous carbon foams as bipolar flow plate material for proton exchange membrane fuel cells - SEEP2010, Bari Italy, Italien, 2010, pp. 77-83 |
| 2010 | Study to Characterise the Performance of Micro Tubular Solid Oxide Fuel Cells by the Invention of an Avant GStudy to Characterise the Performance of Micro Tubular Solid Oxide Fuel Cells by the Inventiarde Experimental Apparatus and Computational Modelling V. Lawlor - Study to Characterise the Performance of Micro Tubular Solid Oxide Fuel Cells by the Invention of an Avant GStudy to Characterise the Performance of Micro Tubular Solid Oxide Fuel Cells by the Inventiarde Experimental Apparatus and Computational Modelling - Phd Thesis, Dublin City University, Irland, 2010, pp. 1-242 |
| 2010 | Darstellung von Schädigungsmechanismen in Baustahlbrammen mittels Röntgen-Computertomografie M. Hochegger, B. Harrer, S. Illie, H. Degischer - Darstellung von Schädigungsmechanismen in Baustahlbrammen mittels Röntgen-Computertomografie - Industrielle Computertomografie 2010, Wels, Österreich, 2010 |
| 2010 | Vermessung der Laserbohrungen in faserverstärktem Graphit mittels Optischer Kohärenztomographie M. Wurm, C. Hofer, H. Traxler, A. Zabernig, B. Harrer - Vermessung der Laserbohrungen in faserverstärktem Graphit mittels Optischer Kohärenztomographie - Industrielle Computertomografie 2010, Wels, Österreich, 2010 |
| 2010 | In-situ Zugversuche an Sphärogussproben im Synchrotron-Strahl J. Crespo-Casanova, H. Degischer, C. Ladron, E. Maire, K. Track, B. Harrer - In-situ Zugversuche an Sphärogussproben im Synchrotron-Strahl - Industrielle Computertomografie 2010, Wels, Österreich, 2010 |
| 2010 | Rissfortschritt in Sphärogussproben durch in-situ Zugversuche im Synchrotron-Strahl J. Crespo-Casanova, H. Degischer, C. Ladron, E. Maire, K. Track, B. Harrer - Rissfortschritt in Sphärogussproben durch in-situ Zugversuche im Synchrotron-Strahl - Tagung Werkstoffprüfung 2010, Neu-Ulm, Deutschland, 2010 |
| 2010 | Visual Optimality and Stability Analysis of 3DCT Scan Positions C. Heinzl, A. Amirkhanov, M. Reiter, E. Gröller - Visual Optimality and Stability Analysis of 3DCT Scan Positions - IEEE Transactions on Visualization and Computer Graphics (TVCG), Vol. 16, No. 6, 2010 |
| 2010 | Reference concentrations of major, minor and trace elements in apple juices M. Zeiner, I. Juranovic-Cindric, M. Kröppl, G. Stingeder - Reference concentrations of major, minor and trace elements in apple juices - Proceedings 5th Central European Congress on Food, Bratislava, Slowakei, 2010 |
| 2010 | Röntgen-Computertomografie von Werkstoffen für den Leichtbau J. Kastner, B. Harrer, D. Salaberger - Röntgen-Computertomografie von Werkstoffen für den Leichtbau in Energieeffiziente Mobilität - Shaker Verlag, 2010 |
| 2010 | Investigation of the mobility of nutritive and harmful components from wood biomass ashes by extraction experiments M. Kröppl, C. Lanzerstorfer, M. Zeiner - Investigation of the mobility of nutritive and harmful components from wood biomass ashes by extraction experiments - Proceedings Fachhochschulkonferenz 2010, Pinkafeld, Österreich, 2010, pp. 512 |
| 2010 | Defect and porosity determination of fibre reinforced polymers by x-ray Computed Tomography J. Kastner, B. Plank, D. Salaberger, J. Sekelja - Defect and porosity determination of fibre reinforced polymers by x-ray Computed Tomography - 2nd Int. Symposium on NDT in Aerospace, Hamburg, D, Deutschland, 2010 |
| 2010 | Solare Stromversorgung für die ländliche Bevölkerung in Entwicklungsländern P. Zeller, M. Rabl - Solare Stromversorgung für die ländliche Bevölkerung in Entwicklungsländern - Proceedings FFH 2010, Pinkafeld, Österreich, 2010, pp. 6 |
| 2010 | SIMULATION OF MODALLY REDUCED ROTATING SYSTEMS WITH EQUIVALENT BEARING FORCES W. Witteveen, H. Holl - SIMULATION OF MODALLY REDUCED ROTATING SYSTEMS WITH EQUIVALENT BEARING FORCES - Proceedings of the 8th IFtoMM International Conference on Rotordynamics, Seoul, Südkorea, 2010 |
| 2010 | Surface hardening of cold-work tool steels - an energy saving and low distortion heat treatment alternative? R. Schneider, C. Schüller, R. Grunwald - Surface hardening of cold-work tool steels - an energy saving and low distortion heat treatment alternative? - Proceedings of the International Conference on Reduction Of Energy Consumption In Heat And Thermochemical Treatment Technologies And Installations, Poiana Brasov, Rumänien, 2010, pp. 61-66 |
| 2010 | Comportamento de aços ferramenta em tratamentos térmicos de ciclos curtos R. Schneider, R. Mesquita, C. Schüller - Comportamento de aços ferramenta em tratamentos térmicos de ciclos curtos - Proceedings of Encontro da Cadeia de Ferramentas, Moldes e Matrizes - Moldes 2010, Sao Paulo, Sao Paulo, Brasilien, 2010, pp. 160-169 |
| 2009 | Baubiologische Messtechniken (Datenbank LQG) H. C. Leindecker, F. Heisinger - Baubiologische Messtechniken (Datenbank LQG) - Technical Report, FH OÖ F&E GmbH, Österreich, 2009, pp. 105 |
| 2009 | Altbaumodernisierung von großvolumigen Wohngebäuden (Datenbank LQG) H. C. Leindecker, J. Rammerstorfer - Altbaumodernisierung von großvolumigen Wohngebäuden (Datenbank LQG) - Technical Report, FH OÖ F&E GmbH, Österreich, 2009, pp. 126 |
| 2009 | A MICRO TUBULAR SOFC AND STACK TESTING APPERATUS: TO PROVIDE A MEANS OF DEVELOPING HIGHLY EFFICIENT PORTABLE AND AUXILARY POWER PACKS FOR THE FUTURE V. Lawlor, A. Mariani, C. Hochenauer, G. Zauner, S. Griesser, D. Meissner, A. Olabi, S. Cordiner, G. Buchinger - A MICRO TUBULAR SOFC AND STACK TESTING APPERATUS: TO PROVIDE A MEANS OF DEVELOPING HIGHLY EFFICIENT PORTABLE AND AUXILARY POWER PACKS FOR THE FUTURE - Proceedings of SEEP 2009, Dublin, Irland, 2009, pp. 2-7 |
| 2009 | Micro-tubular SOFCs to Measure the Effects of Cross Flow on Mass Transfer Rates Around the Perimeter of a Cylindrical Electrode V. Lawlor, D. Meissner, C. Hochenauer, S. Griesser, S. Cordiner, A. Mariani, G. Zauner, A. Olabi, G. Buchinger - Micro-tubular SOFCs to Measure the Effects of Cross Flow on Mass Transfer Rates Around the Perimeter of a Cylindrical Electrode - ECS Transactions, Vol. 25, No. 2, 2009, pp. 1283-1293 |
| 2009 | Herstellung und Charakterisierung von mikrotubulären Festoxidbrennstoffzellen G. Buchinger - Herstellung und Charakterisierung von mikrotubulären Festoxidbrennstoffzellen - Phd Thesis, Montanuniversität Leoben, Österreich, 2009, pp. 1-280 |
| 2009 | Micro-tubular SOFC: Towards a power pack for automotive and auxiliary power supply use V. Lawlor, G. Zauner, A. Mariani, C. Hochenauer, J. Carton, S. Griesser, K. Klein, S. Kuehn, D. Meissner, A. Olabi, S. Cordiner, G. Buchinger - Micro-tubular SOFC: Towards a power pack for automotive and auxiliary power supply use - Elevent Grove Fuel Cell Symposiun, London, Vereinigtes Königreich von Großbritannien und Nordirland, 2009, pp. 1 |
| 2009 | Detektierbarkeit von Heterogenitäten in Fe - Basis - und Aluminiumlegierungen mittels Röntgen - Computertomographie B. Harrer - Detektierbarkeit von Heterogenitäten in Fe - Basis - und Aluminiumlegierungen mittels Röntgen - Computertomographie - Phd Thesis, Technische Universität Wien, Inst. f. Werkstoffwissenschaft u. Werkstofftechnologie, Österreich, 2009, pp. 1-229 |
| 2009 | INVESTIGATION OF THE SUITABILITY OF UNUSED TANKS C. Hochenauer, V. Lawlor, E. Spiegl, B. Linimayr - INVESTIGATION OF THE SUITABILITY OF UNUSED TANKS - Proceedings of SEEP 2009, Dublin, Irland, 2009 |
| 2009 | Monitoring of copper in clarified apple juices M. Zeiner, I. Juranovic-Cindric, M. Kröppl, G. Stingeder - Monitoring of copper in clarified apple juices - EuroAnalysis 2009, Innsbruck, Österreich, 2009 |
| 2009 | Life Cycle Assessment als Werkzeug einer ökologischen Produktentwicklung C. Möltner, F. Schweitzer, K. Gaubinger - Life Cycle Assessment als Werkzeug einer ökologischen Produktentwicklung - Proceedings FFH 2009, Villach, Österreich, 2009, pp. 342-348 |
| 2009 | Inverse polynomial images consisting of an interval and an arc K. Schiefermayr - Inverse polynomial images consisting of an interval and an arc - COMPUTATIONAL METHODS AND FUNCTION THEORY, Vol. 9, No. 2, 2009, pp. 407-420 |
| 2009 | Development of Bending-Type Ultrasonic Transducers with Rotational Symmetry M. Rabl, M. Jungwirth, P. Zeller - Development of Bending-Type Ultrasonic Transducers with Rotational Symmetry - SENSOR+TEST Kongress 2009, Nürnberg, Deutschland, 2009, pp. 247-252 |
| 2009 | Ganzheitliche Optimierung von Gebäuden T. Schrag, H. C. Leindecker, E. Heiduk, W. Gollner, C. Wartha, E. Stocker - Ganzheitliche Optimierung von Gebäuden - Proceedings of e-nova 2009, Pinkafeld, Österreich, 2009, pp. 39-47 |
| 2009 | Towards an optamised Micro-tubular SOFC reactor core design. V. Lawlor, C. Hochenauer, G. Zauner, S. Griesser, A. Olabi, D. Meissner, G. Buchinger - Towards an optamised Micro-tubular SOFC reactor core design. - Tagungsband des 3. Forschungsforums der österreichischen Fachhochschulen, Fachhochschule Kärnten, Villach, Österreich, 2009, pp. 288-293 |
| 2009 | Review of the micro-tubular solid oxide fuel cell (part I: Stack design issues and research activities) V. Lawlor, S. Griesser, G. Buchinger, A. Olabi, S. Cordiner, D. Meissner - Review of the micro-tubular solid oxide fuel cell (part I: Stack design issues and research activities) - Journal of Power Sources, Vol. 153, No. 2, 2009, pp. 387-399 |
| 2009 | Monte-Carlo Simulations for Evaluation of different influences on projections of computed tomography B. Chyba, M. Mantler, M. Reiter - Monte-Carlo Simulations for Evaluation of different influences on projections of computed tomography - Denver X-Ray Conference 2009, Denver, Vereinigte Staaten von Amerika, 2009, pp. 4 |
| 2009 | A STUDY TO INVESTIGATE METHODS TO MEASURE THE TEMPERATURE OF A MT-SOFC IN A HIGH TEMPERATURE WIND TUNNEL. V. Lawlor, G. Zauner, A. Mariani, C. Hochenauer, S. Griesser, J. Carton, S. Kuehn, K. Klein, D. Meissner, A. Olabi, S. Cordiner, G. Buchinger - A STUDY TO INVESTIGATE METHODS TO MEASURE THE TEMPERATURE OF A MT-SOFC IN A HIGH TEMPERATURE WIND TUNNEL. - Third European Fuel Cell Technology and Applications Conference - Piero Lunghi Conference, Rome Italy, Italien, 2009, pp. 2 |
| 2009 | Can Microtome cuts give additional Information to Viscosity-Crystallinity Curves? J. F. Pühringer, G. Eder - Can Microtome cuts give additional Information to Viscosity-Crystallinity Curves? - Advances in Polymer Science and Technology 1, Linz, Österreich, 2009, pp. 101-102 |
| 2009 | Determination of the Parameters Needed to Describe the Heating Step in the Thermoforming Process J. F. Pühringer, G. Zitzenbacher, B. Priller - Determination of the Parameters Needed to Describe the Heating Step in the Thermoforming Process - Advances in Polymer Science and Technology 1, Linz, Österreich, 2009, pp. 115-116 |
| 2009 | Forschung und Enwicklung J. Kastner - Forschung und Enwicklung in 15 Jahre Fachhochschulen in Österreich (Editors: H. Holzinger, W. Jungwirth) - Facultas, 2009, pp. 172-190 |
| 2009 | Simulation des Aufheizprozesses beim Muffenformen an Kunststoffrohren J. F. Pühringer, G. Zitzenbacher - Simulation des Aufheizprozesses beim Muffenformen an Kunststoffrohren - Internationales Forum Mechatronik 2009, Linz, Österreich, 2009, pp. 6 |
| 2009 | Integral Curve versus Separate Bell. New Aspects on the Construction Modes of Crumhorns. D. Salaberger, B. Darmstädter - Integral Curve versus Separate Bell. New Aspects on the Construction Modes of Crumhorns. - Conference on Interdisciplinary Musicology (CIM09), Paris, Frankreich, 2009 |
| 2009 | Influence of Thermal Material Properties on the Heating Step of Pipe Belling J. F. Pühringer, G. Zitzenbacher - Influence of Thermal Material Properties on the Heating Step of Pipe Belling - Proceedings of Europes and Africas Regional Meeting 2009, Polymer Processing Society (PPS), Larnaca, Zypern, 2009, pp. 6 |
| 2009 | Measuring the Frictional Behaviour of Polymer Bulk Solids on Screw Surfaces with a New Developed Test Apparatus G. Zitzenbacher, C. Kneidinger, A. Kögler, H. Hager - Measuring the Frictional Behaviour of Polymer Bulk Solids on Screw Surfaces with a New Developed Test Apparatus - Advances in Polymer Science and Technology 1, Linz, Österreich, 2009, pp. 85 |
| 2009 | Interferenz thermischer Wellen A. Gleiter, G. Mayr - Interferenz thermischer Wellen - Tagungsband des Thermographie Kolloquiums, Stuttgart, Deutschland, 2009, pp. 8 |
| 2009 | Information changes and time reversal for diffusion-related periodic fields P. Burgholzer, F. Camacho-Gonzales, D. Sponseiler, G. Mayr, G. Hendorfer - Information changes and time reversal for diffusion-related periodic fields - Progress in biomedical optics and imaging, San Jose, Vereinigte Staaten von Amerika, 2009, pp. 10 |
| 2009 | An Integrated Train Protection and Information System for Regional Lines B. Stadlmann, R. Widmann - An Integrated Train Protection and Information System for Regional Lines - Proceedings of the IEEE 2nd International Symposium on Logistics and Industrial Informatics (Lindi 2009), Linz, Österreich, 2009, pp. 42-46 |
| 2009 | Tracking of flat belts M. Egger - Tracking of flat belts - CHoPS2009, Brisbane, Australien, 2009, pp. 8 |
| 2009 | Bioethanol aus Stroh, Beitrag zum Klimaschutz A. Jäger, C. Lanzerstorfer, A. Eder - Bioethanol aus Stroh, Beitrag zum Klimaschutz - 3. Forschungsforum der Österreichischen Fachhochschulen, Villach, Österreich, 2009, pp. 282-287 |
| 2009 | Trace Elemental Characterization of Fly ash by ICP-OES M. Kröppl, I. Lahoz-Munoz - Trace Elemental Characterization of Fly ash by ICP-OES - XIII Italian-Hungarian Symposium on Spectrochemistry: Environmental Contamination and Food Safety, Las Palmas, Spanien, 2009, pp. 112 |
| 2009 | Ermittlung der Reibungsdaten von Kunststoffschüttgütern zur Simulation des Förderverhaltens von Einschneckenplastifiziereinheiten C. Kneidinger, G. Zitzenbacher - Ermittlung der Reibungsdaten von Kunststoffschüttgütern zur Simulation des Förderverhaltens von Einschneckenplastifiziereinheiten - Internationales Forum Mechatronik 2009, Linz, Österreich, 2009, pp. 5 |
| 2009 | Evaluation of Different Methods to Compute Excitation Signals Based on Measured Targets in Agricultural Machines S. Reichl, W. Steiner, M. Steinbatz, M. Hofer - Evaluation of Different Methods to Compute Excitation Signals Based on Measured Targets in Agricultural Machines - PAMM Vol. 9, Danzig, Polen, 2009, pp. 2 |
| 2009 | Practical Approaches for Inverse Calculations of Drive Signals in a Virtual Test Rig with Regard to Agricultural Machines S. Reichl, W. Steiner, M. Steinbatz, M. Hofer - Practical Approaches for Inverse Calculations of Drive Signals in a Virtual Test Rig with Regard to Agricultural Machines - ECCOMAS: European Community on Computational Methods in Applied Sciences, Warschau, Polen, 2009, pp. 8 |
| 2009 | Praktische Ansätze zur inversen Berechnung von Drivesignalen für Landmaschinen auf dem virtuellen Prüfstand S. Reichl, W. Steiner, M. Steinbatz, M. Hofer - Praktische Ansätze zur inversen Berechnung von Drivesignalen für Landmaschinen auf dem virtuellen Prüfstand - Internationales Forum Mechatronik 2009, Linz, Österreich, 2009, pp. 55-65 |
| 2009 | Engineering of Communication Links with AADL in IEC 61499 Automation and Control Systems R. Froschauer, A. Schimmel, F. Auinger, A. Zoitl - Engineering of Communication Links with AADL in IEC 61499 Automation and Control Systems - Proceedings of 7th International IEEE Conference on Industrial Informatics 2009, Cardiff (UK), Vereinigtes Königreich von Großbritannien und Nordirland, 2009, pp. 6 |
| 2009 | Development and Adaptation of IEC 61499 Automation and Control Systems with Runtime Variability Models R. Froschauer, A. Zoitl, P. Grünbacher - Development and Adaptation of IEC 61499 Automation and Control Systems with Runtime Variability Models - Proceedings of 7th International IEEE Conference on Industrial Informatics 2009, Cardiff (UK), Vereinigtes Königreich von Großbritannien und Nordirland, 2009, pp. 6 |
| 2009 | Computation and Visualization of Fabrication Artifacts M. M. Malik, C. Heinzl, E. Gröller - Computation and Visualization of Fabrication Artifacts - Journal of WSCG, Vol. 17, No. 1, 2009, pp. 17-24 |
| 2009 | Application of Statistical Analysis for Uncertainty Visualization of Computed Tomography Data from Multi Material Components C. Heinzl, J. Kastner, E. Gröller - Application of Statistical Analysis for Uncertainty Visualization of Computed Tomography Data from Multi Material Components - Denver X-Ray Conference 2009, Denver, Vereinigte Staaten von Amerika, 2009, pp. 8 |
| 2009 | Analyse und Visualisierung von industriellen CT Daten C. Heinzl - Analyse und Visualisierung von industriellen CT Daten - Phd Thesis, Technische Universität Wien, Institut für Computergraphik und Algorithmen, Österreich, 2009, pp. 110 |
| 2009 | Computertomographie von Multimaterialbauteilen und Auswertung mittels statistischer Analyse C. Heinzl, J. Kastner, E. Gröller - Computertomographie von Multimaterialbauteilen und Auswertung mittels statistischer Analyse - Proceedings FFH 2009, Villach, Österreich, 2009, pp. 8 |
| 2009 | Genauigkeitsoptimierung der Röntgen-Computertomographie für die Geometriebestimmung und Visualisierung der Messunsicherheit J. Kastner, C. Heinzl - Genauigkeitsoptimierung der Röntgen-Computertomographie für die Geometriebestimmung und Visualisierung der Messunsicherheit - DGZfP-Berichtsband BB 115 - CD, Münster, Deutschland, 2009, pp. 8 |
| 2009 | Direct determination of selected trace elements in apple juice by ICP-OES M. Zeiner, I. Juranovic-Cindric, M. Kröppl, S. Hann, G. Stingeder - Direct determination of selected trace elements in apple juice by ICP-OES - Direct determination of selected trace elements in apple juice by ICP-OES, Rom, Italien, 2009, pp. 72 |
| 2009 | The need of high resolution μ-X-ray CT in dendrochronology and in wood identification M. Grabner, D. Salaberger - The need of high resolution μ-X-ray CT in dendrochronology and in wood identification - 6th International Symposium on Image and Signal Processing and Analysis, Salzburg, Österreich, 2009, pp. 349-352 |
| 2009 | Investigation of the mobility of ions in fly ash and bottom ash from wood combustion by extraction experiments M. Kröppl, C. Lanzerstorfer, M. Zeiner - Investigation of the mobility of ions in fly ash and bottom ash from wood combustion by extraction experiments - EuroAnalysis 2009, Innsbruck, Österreich, 2009 |
| 2009 | Aluminium content of clarified apple juices M. Zeiner, I. Juranovic-Cindric, M. Kröppl, G. Stingeder - Aluminium content of clarified apple juices - 13. Österreichische Chemietage , Wien, Österreich, 2009 |
| 2009 | Coefficient of Friction between Bulk Polymers and Different Metal Surfaces at High Pressures C. Kneidinger, G. Zitzenbacher, A. Kögler - Coefficient of Friction between Bulk Polymers and Different Metal Surfaces at High Pressures - Proceedings of Europes and Africas Regional Meeting 2009, Polymer Processing Society (PPS), Larnaca, Zypern, 2009, pp. 4 |
| 2009 | Quality of life in green buildings F. Schweitzer, H. C. Leindecker, K. Gaubinger - Quality of life in green buildings - WASET Conference Proceedings, Paris, Frankreich, 2009, pp. 876-882 |
| 2009 | Simulation Based Design of Powersupply Systems M. Jungwirth, D. Hofinger - Simulation Based Design of Powersupply Systems - Proceedings of International Conference Computer Aided Systems Theory EUROCAST 2009, Las Palmas, Spanien, 2009, pp. 161-163 |
| 2009 | Microstructural Changes During Short-Cycle Heat Tratments of Cold-Work Tool Steels R. Schneider, R. Grunwald, C. Schüller - Microstructural Changes During Short-Cycle Heat Tratments of Cold-Work Tool Steels - New challenges in Heat Treatment and Surface Hardening, Dubrovnik, Kroatien, 2009 |
| 2009 | Biogas aus vorbehandeltem Stroh C. Lanzerstorfer, A. Jäger, A. Eder - Biogas aus vorbehandeltem Stroh - biogas 09, Wels, Österreich, 2009, pp. 51-58 |
| 2009 | Dertermination of Hardness-Impact Toughness Relationship for Short-Cycle Heat Treated Steels R. Schneider - Dertermination of Hardness-Impact Toughness Relationship for Short-Cycle Heat Treated Steels - 17. Conference on Materials and Technology, Portoroz, Slowenien, 2009 |
| 2009 | Designmanagement Performacne in der österreichischen mittelständischen Sachgüterindustrie K. Gaubinger, M. Kolar - Designmanagement Performacne in der österreichischen mittelständischen Sachgüterindustrie - 3. Forschungsforum der Österreichischen Fachhochschulen, Villach, Österreich, 2009, pp. 551-552 |
| 2009 | Störungstheoretische Berechnung modaler Dämpfungen für große FE-Strukturen W. Steiner - Störungstheoretische Berechnung modaler Dämpfungen für große FE-Strukturen - Internationales Forum Mechatronik 2009, Linz, Österreich, 2009 |
| 2009 | Improvement of X-Ray image acquisition using a GPU based 3DCT simulation tool M. Reiter, M. M. Malik, C. Heinzl, D. Salaberger, E. Gröller, H. Lettenbauer, J. Kastner - Improvement of X-Ray image acquisition using a GPU based 3DCT simulation tool - Proccedings of 8th International Conference for Quality Control by Artificial Vision, Wels, Österreich, 2009 |
| 2009 | Wavelet based subsurface defect characterization in pulsed phase thermography for non-destructive evaluation G. Zauner, G. Mayr, G. Hendorfer - Wavelet based subsurface defect characterization in pulsed phase thermography for non-destructive evaluation - Proceedings of SPIE - Wavelet Applications Volume 7248, San Jose / USA, Vereinigte Staaten von Amerika, 2009, pp. 8 |
| 2009 | Absolventenverein "Alumni-Club FH-Campus Wels" Ein Forum für Dialog und Kooeration C. Schiller-Ripota - Absolventenverein "Alumni-Club FH-Campus Wels" Ein Forum für Dialog und Kooeration in 15 Jahre Fachhochschulen in Österreich (Editors: H. Holzinger, W. Jungwirth) - Facultas, 2009, pp. 159 |
| 2009 | Comparative defect evaluation of aircraft components by active thermography G. Zauner, G. Mayr, G. Hendorfer - Comparative defect evaluation of aircraft components by active thermography - Proceedings of SPIE Machine Vision Applications Volume 7251, San Jose / USA, Vereinigte Staaten von Amerika, 2009, pp. 8 |
| 2009 | Bildsegmentierung mittels Multiresolution-Bildverarbeitung zur Detektion von Graphiteinschlüssen in 3D-Computertomographie Aufnahmen G. Zauner, B. Harrer - Bildsegmentierung mittels Multiresolution-Bildverarbeitung zur Detektion von Graphiteinschlüssen in 3D-Computertomographie Aufnahmen - Tagungsband des 3. Forschungsforums der österreichischen Fachhochschulen, Fachhochschule Kärnten, Villach, Österreich, 2009, pp. 5 |
| 2009 | Optimization of Bending-Type Ultrasonic Transducers with Rotational Symmetry using COMSOL Multiphysics M. Jungwirth, M. Rabl - Optimization of Bending-Type Ultrasonic Transducers with Rotational Symmetry using COMSOL Multiphysics - Proceedings COMSOL Conference 2009, Milan, Italien, 2009, pp. 5 |
| 2009 | Charakterisierung von Porositäten in Sintermetallen mit 3D-Röntgencomputertomografie - Anwendungsbeispiel selektives Lasersintern B. Plank, J. Kastner, R. Schneider, R. Busch - Charakterisierung von Porositäten in Sintermetallen mit 3D-Röntgencomputertomografie - Anwendungsbeispiel selektives Lasersintern - DGZfP-Berichtsband BB 115 - CD, Münster, Deutschland, 2009, pp. 810-816 |
| 2009 | Porosity determination in CFRP by means of pulsed thermography combined with effective thermal diffusivity models G. Mayr, G. Hendorfer, B. Plank, J. Sekelja - Porosity determination in CFRP by means of pulsed thermography combined with effective thermal diffusivity models - American Institute of Physics Conference Proceedings, Kingston, Vereinigte Staaten von Amerika, 2009, pp. 8 |
| 2009 | Adhesion and Homogeneity of a-C:H:Si Films Deposited in a Modified Plasma Nitriding System for Industrial Application C. Forsich, D. Heim, T. Müller - Adhesion and Homogeneity of a-C:H:Si Films Deposited in a Modified Plasma Nitriding System for Industrial Application - 36th International Conference on Metallurgical Coatings and Thin Films 2009, San Diego, Vereinigte Staaten von Amerika, 2009 |
| 2009 | Active Thermography for Quantitative Analysis of Defects in Composites G. Hendorfer - Active Thermography for Quantitative Analysis of Defects in Composites - MP Materials Testing, Vol. 51, No. 6, 2009, pp. 405-411 |
| 2009 | Entwicklung eines autonom agierenden Roboters für den Katastropheneinsatz R. Edlinger, A. Poelzleithner - Entwicklung eines autonom agierenden Roboters für den Katastropheneinsatz - Tagungsband des 3. Forschungsforums der österreichischen Fachhochschulen, Fachhochschule Kärnten, Villach, Österreich, 2009, pp. 217-222 |
| 2009 | RoboCup Rescue 2009 - Robot League Team R. Edlinger, A. Poelzleithner, W. Rokitansky, M. Zauner, B. Fahringer, J. Hieslmair, T. Fink, T. Hatheier, H. Kneidinger - RoboCup Rescue 2009 - Robot League Team - Technical Report, FH OÖ Fakultät Wels, Österreich, 2009, pp. 14 |
| 2009 | Lebenszyklusoptimierung von 3 Seiten: LCC, LCA, TQA T. Schrag, W. Gollner, E. Heiduk, H. C. Leindecker, C. Wartha, E. Stocker - Lebenszyklusoptimierung von 3 Seiten: LCC, LCA, TQA - ökosan 09, Weiz, Österreich, 2009, pp. 127-130 |
| 2009 | Einsatz einer SBRIO zur Steuerung eines Rescue-Roboters R. Edlinger - Einsatz einer SBRIO zur Steuerung eines Rescue-Roboters - Virtuelle Instrumente in der Praxis, Fürstenfeldbruck/Germany, Deutschland, 2009, pp. 7 |
| 2008 | Simulation eines industriellen 3D Röntgen Computertomographen zur verbesserten Geometriebestimmung M. Reiter, S. Kunzmann, H. Lettenbauer, B. Chyba, M. Mantler, J. Kastner - Simulation eines industriellen 3D Röntgen Computertomographen zur verbesserten Geometriebestimmung - DACH Jahrestagung 2008 DGZFP , St. Gallen, Schweiz, 2008, pp. 10-20 |
| 2008 | SimCT - Modellierung und Simulation eines industriellen Röntgen 3D Computertomographie Systems M. Reiter, S. Kunzmann, H. Lettenbauer, M. Mantler, J. Kastner - SimCT - Modellierung und Simulation eines industriellen Röntgen 3D Computertomographie Systems - Proceedings of FFH2008 Fachhochschul Forschungs Forum, Wels, Österreich, 2008, pp. 998-999 |
| 2008 | Unternehmenserfolg durch marktorientierte Produktinnovationen K. Gaubinger - Unternehmenserfolg durch marktorientierte Produktinnovationen in Praxisorientiertes Innovations- und Produktmanagement (Editors: K. Gaubinger, T. Werani, M. Rabl) - Gabler Verlag, 2008, pp. 3-16 |
| 2008 | Geometriebestimmung von Multimaterialbauteilen und reproduzierbare Oberflächenextraktion C. Heinzl, J. Kastner, E. Gröller - Geometriebestimmung von Multimaterialbauteilen und reproduzierbare Oberflächenextraktion - Proceedings Industrielle Computertomografie Fachtagung 2008, Wels, Österreich, 2008, pp. 151-156 |
| 2008 | Prozessmodell des integrierten Innovations- und Produktmanagements K. Gaubinger - Prozessmodell des integrierten Innovations- und Produktmanagements in Praxisorientiertes Innovations- und Produktmanagement (Editors: K. Gaubinger, T. Werani, M. Rabl) - Gabler Verlag, 2008, pp. 17-30 |
| 2008 | Fallstudie TAB-Austria: Namensfindung für innovatives Touchscreen-Terminal K. Gaubinger - Fallstudie TAB-Austria: Namensfindung für innovatives Touchscreen-Terminal in Praxisorientiertes Innovations- und Produktmanagement (Editors: K. Gaubinger, T. Werani, M. Rabl) - Gabler Verlag, 2008, pp. 91-100 |
| 2008 | Management von Produktprogrammen und Dienstleistungen K. Gaubinger - Management von Produktprogrammen und Dienstleistungen in Praxisorientiertes Innovations- und Produktmanagement (Editors: K. Gaubinger, T. Werani, M. Rabl) - Gabler Verlag, 2008, pp. 191-200 |
| 2008 | Produkt- und Markttestverfahren für Industriegüter F. Schweitzer, K. Gaubinger - Produkt- und Markttestverfahren für Industriegüter in Praxisorientiertes Innovations- und Produktmanagement (Editors: K. Gaubinger, T. Werani, M. Rabl) - Gabler Verlag, 2008, pp. 261-278 |
| 2008 | Determination of diameter, length and three-dimensional distribution D. Salaberger, J. Kastner, W. Stadlbauer, G. Zitzenbacher, R. Freytag - Determination of diameter, length and three-dimensional distribution - Proceedings of PPS-24, Salerno, Italien, 2008, pp. 1 |
| 2008 | Fallstudie Engel Austria GmbH: Markteinführung einer neuen Spritzgießmaschinengeneration F. Schweitzer, G. Liebig, K. Gaubinger - Fallstudie Engel Austria GmbH: Markteinführung einer neuen Spritzgießmaschinengeneration in Praxisorientiertes Innovations- und Produktmanagement (Editors: K. Gaubinger, T. Werani, M. Rabl) - Gabler Verlag, 2008, pp. 279-288 |
| 2008 | Fallstudie Palfinger AG: Markterprobung der High-Performance Kranreihe M. Kolar, K. Gaubinger - Fallstudie Palfinger AG: Markterprobung der High-Performance Kranreihe in Praxisorientiertes Innovations- und Produktmanagement (Editors: K. Gaubinger, T. Werani, M. Rabl) - Gabler Verlag, 2008, pp. 289-302 |
| 2008 | Marketingmanagement – Aufgaben entlang des Produktlebenszyklus K. Gaubinger - Marketingmanagement – Aufgaben entlang des Produktlebenszyklus in Praxisorientiertes Innovations- und Produktmanagement (Editors: K. Gaubinger, T. Werani, M. Rabl) - Gabler Verlag, 2008, pp. 303-316 |
| 2008 | Fallstudie Fronius International GmbH: Lifecyclemanagement eines Technologieführers G. Pichler, G. Binder, K. Gaubinger - Fallstudie Fronius International GmbH: Lifecyclemanagement eines Technologieführers in Praxisorientiertes Innovations- und Produktmanagement (Editors: K. Gaubinger, T. Werani, M. Rabl) - Gabler Verlag, 2008, pp. 317-328 |
| 2008 | Organisatorische Integration des Innovationsmanagements ins Unternehmen K. Gaubinger - Organisatorische Integration des Innovationsmanagements ins Unternehmen in Praxisorientiertes Innovations- und Produktmanagement (Editors: K. Gaubinger, T. Werani, M. Rabl) - Gabler Verlag, 2008, pp. 347-360 |
| 2008 | Fallstudie Homag-Group AG: Neu-Positionierung des Produktmanagements H. Lippmann, K. Gaubinger - Fallstudie Homag-Group AG: Neu-Positionierung des Produktmanagements in Praxisorientiertes Innovations- und Produktmanagement (Editors: K. Gaubinger, T. Werani, M. Rabl) - Gabler Verlag, 2008, pp. 361-370 |
| 2008 | Fallstudie Pöttinger Maschinenfabrik GmbH: Organisation des Innovationsmanagements M. Baldinger, B. Wimmer, K. Gaubinger - Fallstudie Pöttinger Maschinenfabrik GmbH: Organisation des Innovationsmanagements in Praxisorientiertes Innovations- und Produktmanagement (Editors: K. Gaubinger, T. Werani, M. Rabl) - Gabler Verlag, 2008, pp. 371-380 |
| 2008 | Produktentwicklung "Vitaldrink" K. Zehethofer, K. Gaubinger - Produktentwicklung "Vitaldrink" - Report, science2business, Österreich, 2008, pp. 22 |
| 2008 | Multiskalare Tomografie von Diamant verstärkten Metallmatrix Verbundwerkstoffen für Kühlungszwecke M. Schöbel, B. Harrer, H. Degischer - Multiskalare Tomografie von Diamant verstärkten Metallmatrix Verbundwerkstoffen für Kühlungszwecke - Praktische Metallografie, Jena, Deutschland, 2008, pp. 337-342 |
| 2008 | Influence and effects of gas flow on the deposition of SiOCN films in an industrial scale DC glow discharge plasma system T. Müller, A. Gebeshuber, D. Heim, C. Forsich - Influence and effects of gas flow on the deposition of SiOCN films in an industrial scale DC glow discharge plasma system - Asian-European International Conference on Plasma Surface Engineering 2008, München, Deutschland, 2008, pp. 1 |
| 2008 | Röntgen-Computertomografieuntersuchungen an der Saliera und an Holzblasinstrumenten aus der Renaissance D. Salaberger, J. Kastner - Röntgen-Computertomografieuntersuchungen an der Saliera und an Holzblasinstrumenten aus der Renaissance - Proceedings of FFH2008 Fachhochschul Forschungs Forum, Wels, Österreich, 2008, pp. 341-346 |
| 2008 | Target Costing, W. Girkinger, K. Gaubinger - Target Costing, in :Praxisorientiertes Innovations- und Produktmanagement - Gabler Verlag, 2008, pp. 143-154 |
| 2008 | An upper bound for the logarithmic capacity of two intervals K. Schiefermayr - An upper bound for the logarithmic capacity of two intervals - COMPLEX VARIABLES AND ELLIPTIC EQUATIONS, Vol. 53, No. 1, 2008, pp. 65-75 |
| 2008 | Managing the Life-cycle of Industrial Automation Systems with Product Line Variability Models R. Froschauer, D. Dhungana, P. Grünbacher - Managing the Life-cycle of Industrial Automation Systems with Product Line Variability Models - Proceedings of the 34th EUROMICRO Conference on Software Engineering and Advanced Applications, Parma, Italien, 2008, pp. 8 |
| 2008 | Runtime Adaptation of IEC 61499 Applications Using Domain-specific Variability Models R. Froschauer, D. Dhungana, P. Grünbacher - Runtime Adaptation of IEC 61499 Applications Using Domain-specific Variability Models - Proceedings of the 2nd International Workshop on Dynamic Software Product Lines (DSPL 2008), Limerick, Irland, 2008, pp. 6 |
| 2008 | Influence of the deposition temperature on mechanical and tribological properties of a-C:H:Si coatings on nitrided and postoxidized steel deposited by DC-PACVD C. Forsich, D. Heim, T. Müller - Influence of the deposition temperature on mechanical and tribological properties of a-C:H:Si coatings on nitrided and postoxidized steel deposited by DC-PACVD - SURFACE & COATINGS TECHNOLOGY, Vol. 203, No. 203, 2008, pp. 521-525 |
| 2008 | Energieeffizienz und Behaglichkeit in Gebäuden H. C. Leindecker - Energieeffizienz und Behaglichkeit in Gebäuden - Geäudetechnik - Energieeffizienz oder/und Behaglichkeit, Wels, Österreich, 2008, pp. 8-53 |
| 2008 | Erste Ergebnisse der 3D- Röntgencomputertomographischen Untersuchungen an Blasinstrumenten der Sammlung alter Musikinstrumente B. Darmstädter, D. Salaberger - Erste Ergebnisse der 3D- Röntgencomputertomographischen Untersuchungen an Blasinstrumenten der Sammlung alter Musikinstrumente in Technologische Studien, 2008, pp. 108-139 |
| 2008 | A lower bound for the minimum deviation of the Chebyshev polynomial K. Schiefermayr - A lower bound for the minimum deviation of the Chebyshev polynomial - EAST JOURNAL ON APPROXIMATIONS, Vol. 14, No. 2, 2008, pp. 223-233 |
| 2008 | Entwicklung eine Produktmanagement-Benchmarking-Frameworks für mittelständische Industriegüterunternehmen K. Gaubinger, M. Rabl - Entwicklung eine Produktmanagement-Benchmarking-Frameworks für mittelständische Industriegüterunternehmen - Proceedings of FFH2008 Fachhochschul Forschungs Forum, Wels, Österreich, 2008, pp. 108-113 |
| 2008 | Strategische Designmanagement-Toolbox K. Gaubinger, M. Kolar - Strategische Designmanagement-Toolbox - Proceedings of FFH2008 Fachhochschul Forschungs Forum, Wels, Österreich, 2008, pp. 132-137 |
| 2008 | Online Fluid-Monitoring using an electromechanical Cantilever M. Jungwirth - Online Fluid-Monitoring using an electromechanical Cantilever - Proceedings EUROSIME 2008, Freiburg, Deutschland, 2008, pp. 141-146 |
| 2008 | Modal computation of jointed structures W. Witteveen - Modal computation of jointed structures - Phd Thesis, Johannes Kepler Universität Linz, Österreich, 2008 |
| 2008 | Passivhaus - Grundlagen H. C. Leindecker - Passivhaus - Grundlagen - FH Science Day 2008, Linz, Linz, Österreich, 2008, pp. 59-64 |
| 2008 | Intelligentes Fassadensystem mit Glaslamellen H. C. Leindecker, D. Neyer - Intelligentes Fassadensystem mit Glaslamellen - e-nova 2008, Pinkafeld, Österreich, 2008, pp. 49-57 |
| 2008 | Optical characterization of thin layers grown on metal components F. Mayrhofer, G. Zauner, G. Hendorfer - Optical characterization of thin layers grown on metal components - Photonics Europe - Optical Sensors 7003A, Strasbourg, Frankreich, 2008, pp. 12 |
| 2008 | Anwendung der Computertomographie auf Komponenten der Kernfusionstechnik H. Traxler, B. Harrer, T. Friedrich, B. Schedler, J. Kastner - Anwendung der Computertomographie auf Komponenten der Kernfusionstechnik - Proceedings Industrielle Computertomografie Fachtagung 2008, Wels, Österreich, 2008, pp. 29-36 |
| 2008 | Röntgen-Computertomographie zur Charakterisierung von Heterogenitäten in Eisenwerkstoffen B. Harrer, B. Plank, D. Moore, J. Kastner, H. Degischer - Röntgen-Computertomographie zur Charakterisierung von Heterogenitäten in Eisenwerkstoffen - Proceedings Industrielle Computertomografie Fachtagung 2008, Wels, Österreich, 2008, pp. 89-95 |
| 2008 | Pulsed Thermography of CFC Monoblock Divertor Components H. Traxler, S. Gerzoskovitz, L. Sigl, B. Harrer, J. Kastner - Pulsed Thermography of CFC Monoblock Divertor Components - 25th Symposion on Fusion Technology -SOFT 2008, Rostock, Deutschland, 2008, pp. 8 |
| 2008 | Röntgen-Computertomographie zur Quantifizierung von Porenstrukturen in Sintereisen B. Harrer, C. Gierl, H. Danninger, R. Schneider, J. Kastner - Röntgen-Computertomographie zur Quantifizierung von Porenstrukturen in Sintereisen - Welser Werkstoff-Kolloquium 2008, Wels, Österreich, 2008, pp. 27-32 |
| 2008 | Opportunities in the Detection of Inhomogeneities in Steel by Computed Tomography B. Harrer, J. Kastner, W. Winkler, H. Degischer - Opportunities in the Detection of Inhomogeneities in Steel by Computed Tomography - The 17th World Conference on Non-destructive Testing and Exhibition, Shanghai, China, 2008, pp. 7 |
| 2008 | Monte Carlo Simulation of Projections in Computed Tomography B. Chyba, M. Mantler, M. Reiter - Monte Carlo Simulation of Projections in Computed Tomography - Powder Diffraction Journal Vol. 23, Vol. 23, No. 2, 2008, pp. 150-153 |
| 2008 | Method for three-dimensional evaluation and visualization of the distribution of fibres in glass-fibre reinforced injection molded parts by µ-X-ray computed tomography F. Pfeifer, J. Kastner, R. Freytag - Method for three-dimensional evaluation and visualization of the distribution of fibres in glass-fibre reinforced injection molded parts by µ-X-ray computed tomography - "WCNDT Shanghai 2008", Shanghai, China, 2008, pp. 8 |
| 2008 | Pipeline zur dreidimensionalen Auswertung und Visualisierung der Faserverteilung in glasfaserverstärkten Kunststoffteilen aus µ-Röntgen-Computertomografiedaten J. Kastner, F. Pfeifer, C. Heinzl, R. Freytag - Pipeline zur dreidimensionalen Auswertung und Visualisierung der Faserverteilung in glasfaserverstärkten Kunststoffteilen aus µ-Röntgen-Computertomografiedaten - DACH Jahrestagung 2008 DGZFP , St. Gallen, Schweiz, 2008, pp. 8 |
| 2008 | Computertomographie zur Visualisierung von Wasser auf Textilien C. Schuster, D. Salaberger, J. Kastner - Computertomographie zur Visualisierung von Wasser auf Textilien - Proceedings Industrielle Computertomografie Fachtagung 2008, Wels, Österreich, 2008, pp. 128-136 |
| 2008 | Optische Kohärenztomografie und Röntgen-CT für die Charakterisierung von Kunststoffsystemen D. Stifter, J. Kastner, E. Schlotthauer, E. Breuer, K. Wiesauer - Optische Kohärenztomografie und Röntgen-CT für die Charakterisierung von Kunststoffsystemen - Proceedings Industrielle Computertomografie Fachtagung 2008, Wels, Österreich, 2008, pp. 23-29 |
| 2008 | Statistical analysis of Multi-Material Components using Dual Energy CT C. Heinzl, J. Kastner, T. Möller, E. Gröller - Statistical analysis of Multi-Material Components using Dual Energy CT - Proceedings of Vision, Modeling, and Visualization 2008, Konstanz, Germany, Deutschland, 2008, pp. 10 |
| 2008 | A finite element based stability test for equilibria of flexible structures in circular orbits W. Steiner - A finite element based stability test for equilibria of flexible structures in circular orbits - INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, Vol. 43, No. 7, 2008, pp. 650-659 |
| 2008 | Emissionsminderung bei Eisenerz-Sinteranlagen C. Lanzerstorfer, A. Fleischanderl, T. Plattner, W. Ehler, E. Zwittag - Emissionsminderung bei Eisenerz-Sinteranlagen - VDI Bericht 2035, Nürnberg, Deutschland, 2008, pp. 161-170 |
| 2008 | Biomass ash and heavy metals C. Lanzerstorfer, S. Lacher, C. Hinterstoisser - Biomass ash and heavy metals - Proceedings Central European Biomass Conference 2008, Graz, Österreich, 2008, pp. 130 |
| 2008 | Advantages of decentralized Bioethanol Production C. Lanzerstorfer, A. Jäger - Advantages of decentralized Bioethanol Production - 4.European Bioethanol technolgy Meeting Detmold, Detmold, Deutschland, 2008, pp. 11 |
| 2008 | Possibilities of a decentralized Bioethanol production A. Jäger, C. Lanzerstorfer, A. Eder, S. Fahrnik - Possibilities of a decentralized Bioethanol production - Proceedings Central European Biomass Conference 2008, Graz, Österreich, 2008, pp. 141 |
| 2008 | Ausstattung, Ressourcen und Kooperationen des Fachbereichs Werkstofftechnik R. Schneider - Ausstattung, Ressourcen und Kooperationen des Fachbereichs Werkstofftechnik - Welser Werkstoff-Kolloquium 2008, Wels, Österreich, 2008, pp. 4-9 |
| 2008 | Biogas - Quo Vadis A. Jäger, C. Lanzerstorfer - Biogas - Quo Vadis - Inform, Vol. 1, No. 8, 2008, pp. 12-15 |
| 2008 | Untersuchung der Induktionshärtbarkeit eines hochlegierten Kaltarbeitsstahles R. Schneider, R. Grunwald - Untersuchung der Induktionshärtbarkeit eines hochlegierten Kaltarbeitsstahles - Welser Werkstoff-Kolloquium 2008, Wels, Österreich, 2008, pp. 33-38 |
| 2008 | Charakterisierung des Umform- und Rekristallisationsverhaltes höchstfester Karosseriestähle G. Schestak, M. Hartl, R. Schneider, E. Arenholz - Charakterisierung des Umform- und Rekristallisationsverhaltes höchstfester Karosseriestähle - Welser Werkstoff-Kolloquium 2008, Wels, Österreich, 2008, pp. 39-44 |
| 2008 | Experimentelle Bestimmung der spezifischen elektrischen Leitfähigkeit hoch CaF2-haltiger Schlacken - Teil II: Ergebnise aus Labor und indutrieller Praxis J. Korp, R. Schneider, P. Presoly, W. Krieger - Experimentelle Bestimmung der spezifischen elektrischen Leitfähigkeit hoch CaF2-haltiger Schlacken - Teil II: Ergebnise aus Labor und indutrieller Praxis - Berg- und Hüttenmännische Monatshefte, Vol. 153, No. 5, 2008, pp. 175-181 |
| 2008 | Heat treatment of corrosion resistant tool steels for plastic moulding R. Schneider, J. Perko, G. Reithofer - Heat treatment of corrosion resistant tool steels for plastic moulding - Materiali in Technologije, Vol. 42, No. 5, 2008, pp. 29-31 |
| 2008 | Heat treatment of hot work tool steels - Size matters! G. Reithofer, R. Schneider - Heat treatment of hot work tool steels - Size matters! - Materiali in Technologije, Vol. 42, No. 5, 2008, pp. 32-33 |
| 2008 | Electrical Conductivity and Corresponding Specific Energy Consumption of MgO-containing ESR-Slags P. Presoly, J. Korp, R. Schneider - Electrical Conductivity and Corresponding Specific Energy Consumption of MgO-containing ESR-Slags - 9th European Electric Steelmaking Conference, Krakow, Polen, 2008, pp. 10 |
| 2008 | Charakterisierung von Porositäten in Sintermetallen mit 3D-Röntgencomputertomographie zur Ermittlung optimaler Fertigungsparameter beim selektiven Laserschmelzen B. Plank - Charakterisierung von Porositäten in Sintermetallen mit 3D-Röntgencomputertomographie zur Ermittlung optimaler Fertigungsparameter beim selektiven Laserschmelzen - Master/Diploma Thesis, FH OÖ Fakultät Wels, Österreich, 2008, pp. 161 |
| 2008 | Laufverhalten von Flachbändern M. Egger - Laufverhalten von Flachbändern - Stahleisen GmbH, 2008 |
| 2008 | Nitrierhärtetiefe - Messicherheit und Streubereich der Messmethode R. Grunwald, R. Schneider - Nitrierhärtetiefe - Messicherheit und Streubereich der Messmethode - Protokoll zur 74. Sitzung des UA für Wärmebehandlung und Härtereitechnik, Wels, Österreich, 2008, pp. 15 |
| 2008 | Heating Simulation of the Pipe Belling Process J. Pühringer, G. Zitzenbacher - Heating Simulation of the Pipe Belling Process - Proceedings of Americas Regional Meeting, Polymer Processing Society (PPS), Charleston, Vereinigte Staaten von Amerika, 2008, pp. 2 |
| 2008 | Friction of Polymer Pellets at Screw Surfaces C. Kneidinger, G. Zitzenbacher, H. Hager - Friction of Polymer Pellets at Screw Surfaces - Proceedings of Americas Regional Meeting, Polymer Processing Society (PPS), Charleston, Vereinigte Staaten von Amerika, 2008, pp. 1-2 |
| 2008 | Investigation of polymer and polymer/fibre composite materials with optical coherence tomography D. Stifter, E. Schlotthauer, K. Wiesauer, J. Kastner, M. Wurm - Investigation of polymer and polymer/fibre composite materials with optical coherence tomography - MEASUREMENT SCIENCE & TECHNOLOGY, Vol. 19, No. 74011, 2008, pp. 1-8 |
| 2008 | Röntgen-Computertomografieuntersuchungen an der Saliera und an Holzblasinstrumenten aus der Renaissance D. Salaberger, J. Kastner - Röntgen-Computertomografieuntersuchungen an der Saliera und an Holzblasinstrumenten aus der Renaissance in Tagungsband 2. Forschungsforum der österreichischen Fachhochschulen (Editors: J. Kastner) - Shaker Verlag, 2008, pp. 341-346 |
| 2008 | Design and manufacturing aspects of a vaginal speculum of antiquity as investigated by computed tomographies K. D. Bouzakis, K. Efstathiou, D. Salaberger, J. Kastner - Design and manufacturing aspects of a vaginal speculum of antiquity as investigated by computed tomographies - JOURNAL OF ARCHAEOLOGICAL SCIENCE, Vol. 35, No. 1, 2008, pp. 633-642 |
| 2008 | Articulation despite damaged Articulationes: Syngnathia in Historic Skulls D. Schamall, M. Teschler-Nikola, S. Tangl, D. Salaberger - Articulation despite damaged Articulationes: Syngnathia in Historic Skulls - 17. European Meeting of the Paleopathology Association, Kopenhagen, Dänemark, 2008, pp. 1 |
| 2008 | Service level performance of MRP, KANBAN, CONWIP and DBR due to parameter stability and environmental robustness H. Jodlbauer, A. Huber - Service level performance of MRP, KANBAN, CONWIP and DBR due to parameter stability and environmental robustness - INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, Vol. 46, No. 8, 2008, pp. 2179-2195 |
| 2008 | Deformation of continuously cast Carbon Steels in the Range of γ-α Transformation M. Hochegger, J. Six, H. Degischer, S. Ilie, B. Harrer - Deformation of continuously cast Carbon Steels in the Range of γ-α Transformation - Thermomechanical Processing of Steel, Padua, Italien, 2008, pp. 10 |
| 2008 | Size and depth determination of defects in plastic materials, especially in CFRP, by means of shearography G. Hendorfer, C. Reiter, G. Mayr - Size and depth determination of defects in plastic materials, especially in CFRP, by means of shearography - American Institute of Physics Conference Proceedings, Vol. 975, Chicago, Vereinigte Staaten von Amerika, 2008 |
| 2008 | RFID Based Location in Closed Rooms - Implementation of a location algorithm B. Stadlmann - RFID Based Location in Closed Rooms - Implementation of a location algorithm - Proceedings of the 5th International Conference on Informatics in Control, Automation and Robotics - ICINCO 2008, Funchal, Madeira, Portugal, 2008, pp. 135-140 |
| 2008 | Basic Train Control System for Regional Branch Lines - Field Test Report B. Stadlmann - Basic Train Control System for Regional Branch Lines - Field Test Report - Computers in Railways XI, Toledo, Spanien, 2008, pp. 253-262 |
| 2008 | High Dynamic Range Imaging for Contrast Enhancement of X-ray Images C. Heinzl, J. Kastner, E. Gröller - High Dynamic Range Imaging for Contrast Enhancement of X-ray Images - Proceedings of IEEE Workshop on X-Ray Micro Imaging of Materials, Devices, and Organisms, Dresden, Deutschland, 2008, pp. 8 |
| 2008 | Trabecular Bone Structures in G. Dvorak, R. Gruber, D. Salaberger, G. Zanoni - Trabecular Bone Structures in - JOURNAL OF DENTAL RESEARCH, Vol. 87, No. 9, 2008, pp. 866-870 |
| 2008 | Numerical Simulation and Experimental Validation to Design an Optimised Micro-Tubular Solid Oxide Fuel Cell Reactor. V. Lawlor, C. Hochenauer, G. Buchinger, S. Griesser, A. Olabi, D. Meissner - Numerical Simulation and Experimental Validation to Design an Optimised Micro-Tubular Solid Oxide Fuel Cell Reactor. - Tagungsband 2. Forschungsforum der österreichischen Fachhochschulen, Wels, Österreich, 2008, pp. 327-334 |
| 2008 | Towards a micro-tubular SOFC reactor with C.F.D, validation, experiments and a high temperature wind tunnel. V. Lawlor, C. Hochenauer, G. Buchinger, S. Griesser, A. Olabi, D. Meissner - Towards a micro-tubular SOFC reactor with C.F.D, validation, experiments and a high temperature wind tunnel. - Proceedings of the 11th annual Sir Bernard Crossland Symposium, Limerick, Irland, 2008, pp. 157 |
| 2008 | Development Of A High Temperature Wind Tunnel And Numerical Simulations To Optimise The Layout Of A SOFC Micro-Tube Reactor V. Lawlor, G. Buchinger, C. Hochenauer, S. Griesser, A. Olabi, D. Meissner - Development Of A High Temperature Wind Tunnel And Numerical Simulations To Optimise The Layout Of A SOFC Micro-Tube Reactor - Proceedings of AGMET 2008: energy and the Irish climate; harnessing the Irish climate for energy, Dublin, Irland, 2008, pp. 24 |
| 2008 | Ideengewinnung und -bewertung im Front-End des Innovationsprozesses M. Rabl, K. Gaubinger - Ideengewinnung und -bewertung im Front-End des Innovationsprozesses in Praxisorientiertes Innovations- und Produktmanagement (Contributions to Book: Part/Chapter/Section 3), (Editors: K. Gaubinger, T. Werani, M. Rabl) - Gabler Verlag, 2008, pp. 59-74 |
| 2008 | Kreativitätstechniken M. Rabl - Kreativitätstechniken in :Praxisorientiertes Innovations- und Produktmanagement (Contributions to Book: Part/Chapter/Section 3), - Gabler Verlag, 2008, pp. 75-90 |
| 2008 | Quality Function Deployment M. Rabl - Quality Function Deployment in :Praxisorientiertes Innovations- und Produktmanagement (Contributions to Book: Part/Chapter/Section 4), - Gabler Verlag, 2008, pp. 127-142 |
| 2008 | Fallstudie Fill Maschinen- und Anlagenbau M. Rabl, K. Gaubinger, M. Gamisch - Fallstudie Fill Maschinen- und Anlagenbau in :Praxisorientiertes Innovations- und Produktmanagement - Gabler Verlag, 2008, pp. 167-176 |
| 2008 | Durchführung von Entwicklungsprojekten und Simultaneous Engineering M. Rabl - Durchführung von Entwicklungsprojekten und Simultaneous Engineering in Praxisorientiertes Innovations- und Produktmanagement (Contributions to Book: Part/Chapter/Section 6), (Editors: K. Gaubinger, T. Werani, M. Rabl) - Gabler Verlag, 2008, pp. 227-238 |
| 2008 | Ablaufoptimierung durch Virtual- und Rapid Prototyping M. Rabl, M. Steinbatz - Ablaufoptimierung durch Virtual- und Rapid Prototyping in Praxisorientiertes Innovations- und Produktmanagement (Contributions to Book: Part/Chapter/Section 6), (Editors: K. Gaubinger, T. Werani, M. Rabl) - Gabler Verlag, 2008, pp. 239-250 |
| 2008 | Fallstudie Rosenbauer International AG Feuerlöschsysteme M. Rabl, K. Gaubinger, S. Hofbauer, H. Heissl - Fallstudie Rosenbauer International AG Feuerlöschsysteme in Praxisorientiertes Innovations- und Produktmanagement (Contributions to Book: Part/Chapter/Section 6), (Editors: K. Gaubinger, T. Werani, M. Rabl) - Gabler Verlag, 2008, pp. 251-260 |
| 2008 | Organisationsformen des Produktmanagements M. Rabl - Organisationsformen des Produktmanagements in :Praxisorientiertes Innovations- und Produktmanagement (Contributions to Book: Part/Chapter/Section 9), - Gabler Verlag, 2008, pp. 329-346 |
| 2008 | Decentralized integrated biogas and bioethanol production C. Lanzerstorfer, A. Jäger - Decentralized integrated biogas and bioethanol production - Zucker Industrie, Vol. 133, No. 10, 2008, pp. 642-645 |
| 2008 | Kombination von Biogasanlage und Bioethanolanlage C. Lanzerstorfer, A. Jäger, A. Eder - Kombination von Biogasanlage und Bioethanolanlage - biogas 08, Graz, Österreich, 2008, pp. 68-77 |
| 2008 | Messsystem zur ortsaufgelösten optischen Charakterisierung dünner Schichten F. Mayrhofer, G. Zauner, G. Hendorfer, G. Darilion, T. Müller - Messsystem zur ortsaufgelösten optischen Charakterisierung dünner Schichten - Proceedings of FFH2008 Fachhochschul Forschungs Forum, Wels, Österreich, 2008, pp. 9999 |
| 2008 | Simulation of an industrial X-ray cone beam computed-tomography system M. Reiter, D. Weiss, H. Lettenbauer, J. Kastner - Simulation of an industrial X-ray cone beam computed-tomography system - Proceedings of IEEE Workshop on X-Ray Micro Imaging of Materials, Devices, and Organisms, Dresden, Deutschland, 2008 |
| 2008 | High Resolution X-ray computed tomography for qualitative and quantitative characterisation of fibre reinforced polymers J. Kastner, D. Salaberger - High Resolution X-ray computed tomography for qualitative and quantitative characterisation of fibre reinforced polymers - International Symposium on NDT in Aerospace, Fürth, Deutschland, 2008, pp. 323-329 |
| 2008 | Finite element modelling of the feline antebrachium - comparison of stress in the intact bones and after extramedullary bridging of a mid-diaphyseal fracture G. Mahr, C. Hinterhofer, J. Kastner - Finite element modelling of the feline antebrachium - comparison of stress in the intact bones and after extramedullary bridging of a mid-diaphyseal fracture - Vet. Med. Austria, Vol. 95, No. 95, 2008, pp. 219-225 |
| 2008 | Modellierung der Transportvorgänge in Schubschneckenplastifiziereinheiten G. Zitzenbacher - Modellierung der Transportvorgänge in Schubschneckenplastifiziereinheiten - Verlag Dr. Müller, 2008 |
| 2008 | Bioethanolproduktion an Biogasanlagenstandorten A. Jäger, C. Lanzerstorfer, A. Eder - Bioethanolproduktion an Biogasanlagenstandorten - Proceedings FH Science Day 2008, Linz, Österreich, 2008, pp. 83-86 |
| 2008 | Stability Analysis of an Orbiting Plate with Finite Elements W. Steiner - Stability Analysis of an Orbiting Plate with Finite Elements - PAMM, Bremen, Deutschland, 2008, pp. 923-924 |
| 2008 | Polypropylen-Blasfolien mit langkettenverzweigtem HMS-PP: Verarbeitungsstabilität, mechanische Eigenschaften und Strukturentwicklung. T. Auinger, M. Stadlbauer, E. Pachner, W. Stadlbauer, G. Zitzenbacher - Polypropylen-Blasfolien mit langkettenverzweigtem HMS-PP: Verarbeitungsstabilität, mechanische Eigenschaften und Strukturentwicklung. - Welser Werkstoff-Kolloquium 2008, Wels, Österreich, 2008, pp. 10-14 |
| 2008 | Herstellung von kreidegefüllten PE-LLD-Regranulat-Blasfolien mittels Compoundverarbeitung, Masterbatcheinmischung und Direktextrusion G. Zitzenbacher, W. Stadlbauer, W. Schubert - Herstellung von kreidegefüllten PE-LLD-Regranulat-Blasfolien mittels Compoundverarbeitung, Masterbatcheinmischung und Direktextrusion - Tagungsband 2. Forschungsforum der österreichischen Fachhochschulen, Wels, Österreich, 2008, pp. 366-371 |
| 2008 | Contributions to Stability Problems in Satellite Dynamics W. Steiner - Contributions to Stability Problems in Satellite Dynamics - Habilitation Thesis, Technische Universität Wien, Österreich, 2008, pp. 103 |
| 2008 | Extrusion of Chalk-filled PE-LLD-Regranulate Blown Films by Applying Different Processing Methods G. Zitzenbacher, W. Stadlbauer, W. Schubert, P. Reven, J. Pühringer - Extrusion of Chalk-filled PE-LLD-Regranulate Blown Films by Applying Different Processing Methods - Proceedings of PPS-24, Salerno, Italien, 2008, pp. 4 |
| 2008 | Active Thermography for Quantitative Analysis of Defects in Composites G. Hendorfer, G. Mayr - Active Thermography for Quantitative Analysis of Defects in Composites - International Symposium on NDT in Aerospace, Fürth, Deutschland, 2008, pp. 67-76 |
| 2008 | Bestimmung der für die Strahlungserwärmung von Kunststoffhalbzeugen beim Thermoformen relevanten Materialeigenschaften J. F. Pühringer, G. Zitzenbacher - Bestimmung der für die Strahlungserwärmung von Kunststoffhalbzeugen beim Thermoformen relevanten Materialeigenschaften - Welser Werkstoff-Kolloquium 2008, Wels, Österreich, 2008, pp. 15-20 |
| 2008 | Fatigue Analysis of a Reconstructed Femur. Effects of Prosthetic Materials S. Reichl, W. Steiner, R. Mootanah - Fatigue Analysis of a Reconstructed Femur. Effects of Prosthetic Materials - Proceeding of the 8th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Sheraton Hotel and SPA, Porto, Portugal, Portugal, 2008, pp. 6 |
| 2008 | Eigenschaften und Anwendungen von Si-hältigen Kohlenstoffschichten C. Forsich, D. Heim, T. Müller - Eigenschaften und Anwendungen von Si-hältigen Kohlenstoffschichten - Welser Werkstoff-Kolloquium 2008, Wels, Österreich, 2008, pp. 8 |
| 2008 | Influence of the Deposition Temperature on Mechanical and Tribological Properties of a-C:H:Si Coatings on Nitrided and Postoxidized Steel Deposited by DC-PACVD, Surface and Coatings Technology C. Forsich, D. Heim, T. Müller - Influence of the Deposition Temperature on Mechanical and Tribological Properties of a-C:H:Si Coatings on Nitrided and Postoxidized Steel Deposited by DC-PACVD, Surface and Coatings Technology - 35th International Conference on Metallurgical Coatings and Thin Films 2008, San Diego, Vereinigte Staaten von Amerika, 2008, pp. 1 |
| 2008 | Tribological Behavior of Amorphous Carbon-Silicon-Coatings on Nitrided and Post-Oxidized Steels Deposited by DC-PACVD D. Heim, C. Forsich, T. Müller - Tribological Behavior of Amorphous Carbon-Silicon-Coatings on Nitrided and Post-Oxidized Steels Deposited by DC-PACVD - 11th International Conference on Plasma Surface Engineering, Garmisch-Partenkirchen, Deutschland, 2008 |
| 2008 | Influence of Pre-Treatment and Roughness on Tribological Properties of a-C:H:Si Coatings Deposited on Nitrided and Postoxidized Steel by Means of DC-PACVD C. Forsich, D. Heim, T. Müller - Influence of Pre-Treatment and Roughness on Tribological Properties of a-C:H:Si Coatings Deposited on Nitrided and Postoxidized Steel by Means of DC-PACVD - 12th Joint Vacuum Conference, Balaton, Ungarn, 2008 |
| 2008 | PACVD zur Abscheidung Si-hältiger Kohlenstoffschichten C. Forsich, D. Heim, D. Müller - PACVD zur Abscheidung Si-hältiger Kohlenstoffschichten - Proceedings FH Science Day 2008, Linz, Österreich, 2008 |
| 2008 | Schnelle und zerstörungsfreie Werkstoffprüfung bei Metallen durch Anwendung der Induktionsthermographie G. Mayr, G. Hendorfer, F. Puchberger, B. Harrer, B. Dietermayr - Schnelle und zerstörungsfreie Werkstoffprüfung bei Metallen durch Anwendung der Induktionsthermographie - Tagungsband des 2. Forschungsforums der österreichischen Fachhochschulen, Wels, Österreich, 2008, pp. 347-353 |
| 2008 | Characterization of Defects in Curved CFRP Samples using Pulsed Thermography and 3D Finite Element Simulation G. Mayr, B. Dietermayr, G. Hendorfer, J. Sekelja - Characterization of Defects in Curved CFRP Samples using Pulsed Thermography and 3D Finite Element Simulation - Proceedings of 9th International Conference on Quantitative Infrared Thermography, Krakau, Polen, 2008, pp. 447-454 |
| 2008 | Analyse innovationsstarker KMUs in Oberösterreich F. Schweitzer - Analyse innovationsstarker KMUs in Oberösterreich - Report, Johannes-Kepler-Universität, Österreich, 2008, pp. 1-20 |
| 2007 | Lateral Running of flat belts: The Angled, Conical Pulley M. Egger - Lateral Running of flat belts: The Angled, Conical Pulley - IFToMM 2007, BESANCON, Frankreich, 2007, pp. 4 |
| 2007 | Dokumentation und Analyse von Messdaten mit Digitalspeicher-Oszilloskopen der Serie TDS1000 und TDS200 von Tektronix K. Kellermayr - Dokumentation und Analyse von Messdaten mit Digitalspeicher-Oszilloskopen der Serie TDS1000 und TDS200 von Tektronix - Report, FH OÖ Fakultät Wels, Österreich, 2007, pp. 25 |
| 2007 | Electrical conductivity of new MgO contentaining ESR slags and its effect om energy consumption J. Korp, R. Schneider, R. Hasenhündl, P. Presoly - Electrical conductivity of new MgO contentaining ESR slags and its effect om energy consumption - Electrical conductivity of new MgO containing ESR slags and its effect on energy consumption, Rosario , Argentinien, 2007, pp. 333-342 |
| 2007 | Deposition of SiOCN and Si-C:H Films in an Industrial Pulsed dc PACVD System C. Forsich, D. Heim - Deposition of SiOCN and Si-C:H Films in an Industrial Pulsed dc PACVD System - 34th International Conference on Metallurgical Coatings and Thin Films 2007, San Diego, Vereinigte Staaten von Amerika, 2007, pp. 1 |
| 2007 | A self-rechargeable and flexible polymer solar battery G. Dennler, R. Koeppe, N. S. Sariciftci, D. Meissner - A self-rechargeable and flexible polymer solar battery - SOLAR ENERGY, Vol. 81, No. 8, 2007, pp. 947-957 |
| 2007 | Operating micro-tubular SOFCs containing nickel based anodes with blends of methane and hydrogen G. Buchinger, J. Kraut, T. Raab, S. Griesser, V. Lawlor, J. Haiber, R. Hiesgen, W. Sitte, D. Meissner - Operating micro-tubular SOFCs containing nickel based anodes with blends of methane and hydrogen - Proceedings: 2007 International Conference on Clean Electrical Power, Capri, Italien, 2007, pp. 450-455 |
| 2007 | Stability of micro tubular SOFCs operated with synthetic wood gases and wood gas components G. Buchinger, P. Hinterreiter, T. Raab, S. Griesser, V. Lawlor, K. Klein, S. Kuehn, W. Sitte, D. Meissner - Stability of micro tubular SOFCs operated with synthetic wood gases and wood gas components - Proceedings: 2007 International Conference on Clean Electrical Power, Capri, Italien, 2007, pp. 444-449 |
| 2007 | Improving the Power Densities and Lifetime of Micro-Tubular SOFCs G. Buchinger, T. Raab, S. Griesser, V. Lawlor, S. Potzmann, S. Kuehn, K. Klein, W. Sitte, D. Meissner - Improving the Power Densities and Lifetime of Micro-Tubular SOFCs - Proceedings ot the 2nd European Fuel Cell Technology and Applications Conference, Rom, Italien, 2007, pp. 1 |
| 2007 | Design of a Micro-Tubular SOFC Rector with CFD and Validations V. Lawlor, G. Buchinger, C. Hochenauer, P. Dawson, T. Raab, S. Griesser, A. Olabi, B. Corcoran, D. Meissner - Design of a Micro-Tubular SOFC Rector with CFD and Validations - Proceedings ot the 2nd European Fuel Cell Technology and Applications Conference, Rom, Italien, 2007, pp. 1 |
| 2007 | ELIE: Content Produktion für e-Learning Engineering-Bereich A. Auinger, J. D. Hallewell Haslwanter, C. Stary, F. Auinger, C. Derndorfer - ELIE: Content Produktion für e-Learning Engineering-Bereich - Proceedings of the International Conference on Interactive Mobile and Computer Aided Learning, Amman, Jordanien, Jordanien, 2007, pp. 10 |
| 2007 | Content Production for E-Learning in Engineering A. Auinger, C. Stary, J. D. Hallewell Haslwanter, F. Auinger, C. Derndorfer - Content Production for E-Learning in Engineering - International Journal of Emerging Technologies in Learning, Vol. 2, No. 2, 2007, pp. 8 |
| 2007 | Observation of current distribution in arc chutes with a Hall probe matrix C. Danninger, P. Zeller, M. Rabl - Observation of current distribution in arc chutes with a Hall probe matrix - Proceedings of the IEEE Sensors 2004, Vienna, Austria, 24/10/2004-27/10/2004, Golden / Colorado, Vereinigte Staaten von Amerika, 2007, pp. 613-614 |
| 2007 | Störungstheoretische Erfassung modaler Dämpfungen für lokal gedämpfte Systeme B. Sieberer, W. Hinterberger, P. Fischer, W. Steiner - Störungstheoretische Erfassung modaler Dämpfungen für lokal gedämpfte Systeme - Schwingungsdämpfung VDI-Berichte 2003, Wiesloch, Deutschland, 2007, pp. 147-178 |
| 2007 | Didaktische Aufbereitung technischer Inhalte unter Einbindung von E-Learning Umgebungen J. D. Hallewell Haslwanter, C. Derndorfer, F. Auinger - Didaktische Aufbereitung technischer Inhalte unter Einbindung von E-Learning Umgebungen - Konferenzbeiträge ifm2007 (Internationales Forum Mechatronik), Winterthur, Schweiz, 2007, pp. 373-388 |
| 2007 | Chancen und Risiken automatischer Überprüfung von Übungen C. Derndorfer, J. D. Hallewell Haslwanter, J. Schulze - Chancen und Risiken automatischer Überprüfung von Übungen - Konferenzbeiträge ifm2007 (Internationales Forum Mechatronik), Winterthur, Schweiz, 2007, pp. 660-664 |
| 2007 | Innovationsprozesse in kleinen und mittleren Unternehmen K. Gaubinger, W. Girkinger - Innovationsprozesse in kleinen und mittleren Unternehmen - Tagungsband 1. Forschungsforum der österreichischen Fachhochschulen, Puch, Österreich, 2007, pp. 120-128 |
| 2007 | Planung von Innovationsaktivitäten in KMU: Ein prozessorientierter Ansatz K. Gaubinger, T. Werani - Planung von Innovationsaktivitäten in KMU: Ein prozessorientierter Ansatz in Planung in kleinen und mittleren Unternehmen (Editors: J. Meyer) - Springer Verlag, 2007, pp. 393-402 |
| 2007 | Hotbox am FH Campus Wels H. C. Leindecker - Hotbox am FH Campus Wels - Report, FH OÖ Fakultät Wels, Österreich, 2007, pp. 3 |
| 2007 | Entwicklung von mikrotubulären SOFCs G. Buchinger, S. Potzmann, T. Raab, S. Griesser, V. Lawlor, S. Kuehn, K. Klein, D. Meissner - Entwicklung von mikrotubulären SOFCs - Tagungsband des ersten Forschungsforum der österreichischen Fachhochschulen, Fachhochschule Salzburg, Campus Urstein, Österreich, 2007, pp. 1 |
| 2007 | Coupling of Biomass Gasification and Solid Oxide Fuel Cell (SOFC) - Technology S. Martini, M. Kleinhappl, C. Roschitz, H. Hofbauer, D. Meissner, G. Buchinger - Coupling of Biomass Gasification and Solid Oxide Fuel Cell (SOFC) - Technology - Proceedings ot the 15th European Biomass Conference & Exhibition, Berlin, Deutschland, 2007, pp. 1029-1033 |
| 2007 | 3D-Röntgen-Computertomografie für die zerstörungsfreie Werkstoffprüfung D. Salaberger, J. Kastner - 3D-Röntgen-Computertomografie für die zerstörungsfreie Werkstoffprüfung - Tagungsband des ersten Forschungsforum der österreichischen Fachhochschulen, Fachhochschule Salzburg, Campus Urstein, Österreich, 2007, pp. 1 |
| 2007 | EHD-Kontakt in der Mehrkörpersimulation für Dynamik und Lebensdaueranalysen von Motor Bauteilen M. Steinbatz - EHD-Kontakt in der Mehrkörpersimulation für Dynamik und Lebensdaueranalysen von Motor Bauteilen - Proceedings FH Science Day 2007, Wels, Österreich, 2007, pp. 33-37 |
| 2007 | Appliance of stereoscopy for bath level detection of steel casting pans C. Rittenschober, K. Niel, R. Rössler - Appliance of stereoscopy for bath level detection of steel casting pans - Proceedings Machine Vision Applications in Industrial Application XV, San Jose, CA, USA, Vereinigte Staaten von Amerika, 2007, pp. 8 |
| 2007 | Performance-Steigerung des Innovationsprozesses, Toolbox für das Innovationscontrolling W. Girkinger, K. Gaubinger - Performance-Steigerung des Innovationsprozesses, Toolbox für das Innovationscontrolling - Wissenschaftsmanagement, Vol. 2007, No. 3, 2007, pp. 26-28 |
| 2007 | Simulation of Flat Belt Running M. Egger - Simulation of Flat Belt Running - steel research, Vol. 78, No. 4, 2007, pp. 364-368 |
| 2007 | Inverse polynomial images which consists of two Jordan arcs -- An algebraic solution K. Schiefermayr - Inverse polynomial images which consists of two Jordan arcs -- An algebraic solution - JOURNAL OF APPROXIMATION THEORY, Vol. 148, No. 2, 2007, pp. 148-157 |
| 2007 | A scheduling problem for several parallel servers K. Schiefermayr, J. Weichbold - A scheduling problem for several parallel servers - MATHEMATICAL METHODS OF OPERATIONS RESEARCH, Vol. 66, No. 1, 2007 |
| 2007 | Fassadenintegrierte Photovoltaik H. C. Leindecker, J. Putzhammer - Fassadenintegrierte Photovoltaik - Technical Report, FH OÖ Fakultät Wels, Österreich, 2007, pp. 148 |
| 2007 | Planung von Innovationsaktivitäten in KMU: Ein prozessorientierter Ansatz K. Gaubinger - Planung von Innovationsaktivitäten in KMU: Ein prozessorientierter Ansatz in Planung in kleinen und mittleren Unternehmen (Editors: J. Meyer et al.), 2007, pp. 393-402 |
| 2007 | Soziale Kompetenz in der Fachhochschul-Ausbildung C. Schiller-Ripota - Soziale Kompetenz in der Fachhochschul-Ausbildung in Soziale Kompetenz: Theoretische Fundierung und Analyse des Status Quo in der oberreichischen Bildungs- und Wirtschaftslandschaft (Editors: M. Jabornegg), 2007, pp. 265-273 |
| 2007 | A model for clubfoot based on micro-CT data G. Windisch, D. Salaberger, W. Rosmarin, J. Kastner - A model for clubfoot based on micro-CT data - JOURNAL OF ANATOMY, Vol. 210, No. 6, 2007, pp. 761-766 |
| 2007 | Benchmark Tests of Single-Break and Double-Break Design Principles W. Hauer, P. Zeller, X. Zhou - Benchmark Tests of Single-Break and Double-Break Design Principles - Proceeding of the 53rd IEEE Holm conference on electrical contacts, Pittsburgh, PA, Vereinigte Staaten von Amerika, 2007, pp. 48-55 |
| 2007 | Messsystem zur Prozesskontrolle bei Wärmebehandlungsprozessen auf Basis einer CCD-Kamera F. Mayrhofer, G. Zauner, G. Hendorfer, G. Darilion - Messsystem zur Prozesskontrolle bei Wärmebehandlungsprozessen auf Basis einer CCD-Kamera - Tagungsband des ersten Forschungsforum der österreichischen Fachhochschulen, Fachhochschule Salzburg, Campus Urstein, Österreich, 2007, pp. 2 |
| 2007 | Solarauto und PV-Solaranlage der FH OÖ Campus Wels H. C. Leindecker - Solarauto und PV-Solaranlage der FH OÖ Campus Wels - Solarauto und PV-Solaranlage der FH OÖ Campus Wels, Eugendorf / Salzburg, Österreich, 2007, pp. 36 |
| 2007 | Energieeffizientes, gesundes Bauen und Wohnen - Ein Widerspruch? H. C. Leindecker - Energieeffizientes, gesundes Bauen und Wohnen - Ein Widerspruch? - Technical Report, FH OÖ Fakultät Wels, Österreich, 2007, pp. 2 |
| 2007 | Behaglichkeitsanalysen von Gebäuden durch die Kombination von thermischer Gebäudesimulation & CFD H. C. Leindecker, D. Neyer - Behaglichkeitsanalysen von Gebäuden durch die Kombination von thermischer Gebäudesimulation & CFD - Forschungsforum der österreichischen Fachhochschulen, Puch, Österreich, 2007, pp. 269-274 |
| 2007 | Modelling Real-time Constraints Regarding Reconfiguration Aspects for IEC 61499 Control Applications G. Grabmair, A. Zoitl, T. Strasser, R. Froschauer - Modelling Real-time Constraints Regarding Reconfiguration Aspects for IEC 61499 Control Applications - INDIN 2007 Conference Proceedings Vol. 2, Wien, Österreich, 2007, pp. 1135-1140 |
| 2007 | Zerstörungsfreie Werkstoffprüfung auf Basis der Aktiven Thermographie G. Mayr, G. Hendorfer, G. Zauner - Zerstörungsfreie Werkstoffprüfung auf Basis der Aktiven Thermographie - Tagungsband des ersten Forschungsforum der österreichischen Fachhochschulen, Fachhochschule Salzburg, Campus Urstein, Österreich, 2007, pp. 251-257 |
| 2007 | A fast and robust method for determining thermal diffusivity images in complex geometries G. Mayr, G. Hendorfer, G. Zauner, F. Puchberger - A fast and robust method for determining thermal diffusivity images in complex geometries - Proceedings of the 4th International Conference of Emerging Technologies in Non-destructive Testing, Stuttgart, Deutschland, 2007, pp. 179-185 |
| 2007 | Optische Kohärenztomografie und 3D-Röntgencomputertomografie J. Kastner, E. Schlotthauer, E. Breuer, D. Stifter - Optische Kohärenztomografie und 3D-Röntgencomputertomografie - MP Materials Testing, Vol. 49, No. 4, 2007, pp. 177-183 |
| 2007 | A Distrubted Energy Management Approach for Autonomous Power Supply Systems I. Hegny, R. Holzer, G. Grabmair, A. Zoitl, F. Auinger, E. Wahlmüller - A Distrubted Energy Management Approach for Autonomous Power Supply Systems - INDIN 2007 Conference Proceedings Vol. 2, Wien, Österreich, 2007, pp. 1111-1116 |
| 2007 | Mikro-Röntgencomputertomografie: Eine zerstörungsfreie Methode für die Archäologie J. Kastner, D. Salaberger, M. Grabner, M. Mehofer - Mikro-Röntgencomputertomografie: Eine zerstörungsfreie Methode für die Archäologie - Archäologie Österreichs, Vol. 18, No. 1, 2007, pp. 60-64 |
| 2007 | An Execution Environment for Real-Time Constrained Control Software based on IEC 61499 A. Zoitl, G. Grabmair, R. Smodic, T. Strasser - An Execution Environment for Real-Time Constrained Control Software based on IEC 61499 - INDIN 2007 Conference Proceedings Vol. 2, Wien, Österreich, 2007, pp. 1117-1122 |
| 2007 | Mikro- und Nano-Computertomographie für die dreidimensionale Charakterisierung von faserverstärkten Verbundwerkstoffen J. Kastner, D. Angermaier, E. Schlotthauer, G. Zitzenbacher, W. Stadlbauer - Mikro- und Nano-Computertomographie für die dreidimensionale Charakterisierung von faserverstärkten Verbundwerkstoffen - Proceedings of the Industrial Symposium Mechatronics 2007 on Sensorics, Linz, Österreich, 2007, pp. 71-79 |
| 2007 | Messung von Mikrobauteilen und reproduzierbare Oberflächenextraktion J. Kastner, D. Salaberger, C. Heinzl - Messung von Mikrobauteilen und reproduzierbare Oberflächenextraktion - PTB-Bericht Geometriebestimmung mit industrieller Computertomografie, Braunschweig, Deutschland, 2007, pp. 181-192 |
| 2007 | Quantitative Messung von Faserlängen und -verteilung in faserverstärkten Kunststoffteilen J. Kastner, D. Angermaier, G. Zitzenbacher, E. Schlotthauer, W. Stadlbauer - Quantitative Messung von Faserlängen und -verteilung in faserverstärkten Kunststoffteilen - DGZFP Jahrestagung 2007, Fürth, Deutschland, 2007, pp. 345-352 |
| 2007 | Innovationscontrolling,Toolbox für international tätige KMU W. Girkinger, K. Gaubinger - Innovationscontrolling,Toolbox für international tätige KMU - FOCUS CONSULTING, Vol. 2007, No. 2, 2007, pp. 10-13 |
| 2007 | Innovationsprozess in kleinen und mittleren Unternehmen W. Girkinger, K. Gaubinger - Innovationsprozess in kleinen und mittleren Unternehmen - Forschungsforum der österreichischen Fachhochschulen, Puch, Österreich, 2007, pp. 1 |
| 2007 | Surface Extraction from Multi-Material Components for Metrology using Dual Energy CT C. Heinzl, J. Kastner, E. Gröller - Surface Extraction from Multi-Material Components for Metrology using Dual Energy CT - IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS, Vol. 13, No. 6, 2007, pp. 1520-1528 |
| 2007 | Comparison of surface detection methods to evaluate cone-beam computed tomography data for three dimensional metrology C. Heinzl, J. Kastner, B. Georgi, H. Lettenbauer - Comparison of surface detection methods to evaluate cone-beam computed tomography data for three dimensional metrology - Proceedings of International Symposium on Digital industrial Radiology and Computed Tomography 2007, Lyon, Frankreich, 2007, pp. 8 |
| 2007 | Charakterisierung von Inhomogenitäten in metallischen Gusswerkstoffen mittels 3D-Röntgen-Computertomographie B. Harrer, J. Kastner, A. Kottar, H. Degischer - Charakterisierung von Inhomogenitäten in metallischen Gusswerkstoffen mittels 3D-Röntgen-Computertomographie - DGZFP Jahrestagung 2007, Fürth, Deutschland, 2007, pp. 10 |
| 2007 | Röntgen-Computertomographie zur Charakterisierung von Inhomogenitäten in Gussgefügen von Aluminium und Stahl B. Harrer, W. Winkler, E. Pissenberger, J. Kastner, H. Degischer - Röntgen-Computertomographie zur Charakterisierung von Inhomogenitäten in Gussgefügen von Aluminium und Stahl - Fortschritte in der Metallographie, Bremen, Deutschland, 2007, pp. 131-136 |
| 2007 | Charcterization of Fuel Cells and Fuel Cell Systems Using Three-Dimensional X-Ray Tomography S. Griesser, G. Buchinger, T. Raab, D. P. Claassen, D. Meissner - Charcterization of Fuel Cells and Fuel Cell Systems Using Three-Dimensional X-Ray Tomography - Journal of Fuel Cell Science and Technology, Vol. 4, No. 1, 2007, pp. 84-87 |
| 2007 | Monte-Carlo simulation of projections in computed tomography M. Mantler, B. Chyba, M. Reiter - Monte-Carlo simulation of projections in computed tomography - Denver X-Ray Conference 2007, Denver, Vereinigte Staaten von Amerika, 2007, pp. 6 |
| 2007 | Fatigue Analysis of a Reconstructed Femur. Effects of Prosthetic Materials S. Reichl - Fatigue Analysis of a Reconstructed Femur. Effects of Prosthetic Materials - Master/Diploma Thesis, FH OÖ Fakultät Wels, Österreich, 2007, pp. 145 |
| 2007 | Efficient Reduction of PM 10 / PN 2.5 emissions at Iron Ore Sinter Plants C. Lanzerstorfer, A. Fleischanderl, T. Plattner - Efficient Reduction of PM 10 / PN 2.5 emissions at Iron Ore Sinter Plants - Dustconf 2007, Maastricht, Niederlande, 2007, pp. 1-12 |
| 2007 | Pulsed Thermography applied to Components with Complex Shape G. Hendorfer, G. Mayr, E. Schlotthauer - Pulsed Thermography applied to Components with Complex Shape - American Institute of Physics Conference Proceedings, Vol. 975, Golden / Colorado, Vereinigte Staaten von Amerika, 2007, pp. 950-957 |
| 2007 | Thermal diffusivity as a probe for material properties and defect characterization G. Hendorfer, G. Mayr, G. Zauner, T. Nömaier, F. Puchberger - Thermal diffusivity as a probe for material properties and defect characterization - Thermo 2007, Budapest, Ungarn, 2007, pp. 10 |
| 2007 | Aktive Thermographie und Shearographie - Neue Methoden zur Porositätsbestimmung, Fehlererkennung und Spannungsanalyse G. Hendorfer - Aktive Thermographie und Shearographie - Neue Methoden zur Porositätsbestimmung, Fehlererkennung und Spannungsanalyse - Konferenzbeiträge ifm2007 (Internationales Forum Mechatronik), Winterthur, Schweiz, 2007, pp. 445-454 |
| 2007 | A New Calculation Model and Optimization Method for Maddock Mixers in Single Screw Plasticising Technology G. Zitzenbacher, R. Karlbauer, H. Thiel - A New Calculation Model and Optimization Method for Maddock Mixers in Single Screw Plasticising Technology - International Polymer Processing, Vol. 22, No. 1, 2007, pp. 73-81 |
| 2007 | A New Stress Calculation Model for the Prediction of Solid Bed Breakup in Single Screw Extruders. G. Zitzenbacher - A New Stress Calculation Model for the Prediction of Solid Bed Breakup in Single Screw Extruders. - Proceedings of the Europe/Africa Meeting 2007 of the Polymer Processing Society, Gothenburg, Sweden, Schweden, 2007, pp. 16 |
| 2007 | Effects of different alloying concepts of new hot work tool steels on the hardness profile after nitriding R. Schneider, H. Schweiger, G. Reiter, V. Strobl - Effects of different alloying concepts of new hot work tool steels on the hardness profile after nitriding - Surface Engineering, Vol. 23, No. 3, 2007, pp. 173-176 |
| 2007 | Simulation of the Induction Hardening of a High Alloyed Tool Steel with a Quench Dilatometer Compared with Real Induction Conditions R. Schneider, R. Grunwald - Simulation of the Induction Hardening of a High Alloyed Tool Steel with a Quench Dilatometer Compared with Real Induction Conditions - Proceedings of the 5th IFHTSE - Int. Conf. on Quenching and Control of Distortion, Berlin, Deutschland, 2007, pp. 225-232 |
| 2007 | Neue Stähle für den Formenbau und daraus resultierende Anforderungen an die Wärmebehandlung R. Schneider - Neue Stähle für den Formenbau und daraus resultierende Anforderungen an die Wärmebehandlung - Werkzeug- und Formenbau in Mitteleuropa - Mit Spezialwissen und Innovation zum Markterfolg, Kirchdorf, Österreich, 2007, pp. 1-21 |
| 2007 | Short- time hardening and tempering behaviour of a low alloy steel R. Schneider, M. Gillich, M. List, D. Heim - Short- time hardening and tempering behaviour of a low alloy steel - Proceedings of the 16th Congress of the Int. Fed. for heat treatment and surface engineering, Brisbane, Australien, 2007, pp. 92-93 |
| 2007 | Tastkopf und Tastkopfabgleich bei Messgeräten (Oszilloskopen) K. Kellermayr - Tastkopf und Tastkopfabgleich bei Messgeräten (Oszilloskopen) - Report, FH OÖ Fakultät Steyr, Logistikum, Österreich, 2007, pp. 1-8 |
| 2007 | Angewandte Simulation für Aktive Invertertechnologie D. Hofinger, M. Jungwirth - Angewandte Simulation für Aktive Invertertechnologie - Proceedings FH Science Day 2007, Wels, Österreich, 2007, pp. 51-58 |
| 2007 | Magnetic Field Sensor Using a Physical Model to Pre-Calculate the Magnetic Field M. Jungwirth - Magnetic Field Sensor Using a Physical Model to Pre-Calculate the Magnetic Field - Proceedings EUROSIME 2007, London, Vereinigtes Königreich von Großbritannien und Nordirland, 2007, pp. 6 |
| 2007 | Multiphysics Modelling of High-Frequency Inductive Devices M. Jungwirth, D. Hofinger - Multiphysics Modelling of High-Frequency Inductive Devices - Proceedings COMSOL Konferenz 2007, Grenoble, Frankreich, 2007, pp. 229-234 |
| 2007 | Konzeption und Realisierung mobiler und autonomer Roboter R. Edlinger - Konzeption und Realisierung mobiler und autonomer Roboter - Master/Diploma Thesis, FH OÖ Fakultät Wels, Österreich, 2007, pp. 134 |
| 2006 | Opperating Micro–tubular SOFCs with Hydrogen Chloride and Hydrogen Sulfide Containing Fuels and Synthetic Wood Gas G. Buchinger, P. Hinterreiter, T. Raab, S. Griesser, W. Sitte, D. Meissner, R. Claassen, D. Claassen - Opperating Micro–tubular SOFCs with Hydrogen Chloride and Hydrogen Sulfide Containing Fuels and Synthetic Wood Gas - Journal of Fuel Cell Science and Technology, Vol. 3, No. 1, 2006, pp. 280-283 |
| 2006 | Hochtemperatur-Brennstoffzellensysteme - Energieeffizienz ohne Wasserstoffinfrastruktur H. Wancura, S. Kuehn, G. Grimschitz, G. de Simone, G. Buchinger, T. Raab - Hochtemperatur-Brennstoffzellensysteme - Energieeffizienz ohne Wasserstoffinfrastruktur - Proceedings of the 9. Symposium Energieinnovation, Graz, Österreich, 2006, pp. 197 |
| 2006 | Multiskalen Bildverarbeitungsmethoden zur Rauschunterdr¨uckung an industriellen Computer-Tomographie Daten M. Reiter - Multiskalen Bildverarbeitungsmethoden zur Rauschunterdr¨uckung an industriellen Computer-Tomographie Daten - Master/Diploma Thesis, FH OÖ Fakultät Wels, Österreich, 2006, pp. 1-150 |
| 2006 | Silica coatings on steel substrates deposited by bipolar pulsed DC PACVD C. Forsich, D. Heim, T. Müller - Silica coatings on steel substrates deposited by bipolar pulsed DC PACVD - Tenth International Conference on Plasma Surface Engineering , Braunschweig, Deutschland, 2006, pp. 1 |
| 2006 | Grundlagen der Identifikation von Geschäftschancen: Situationsanalyse K. Gaubinger - Grundlagen der Identifikation von Geschäftschancen: Situationsanalyse in Praxisorientiertes Business-to-Business-Marketing: Grundlagen und Fallstudien aus Unternehmen (Editors: T. Werani, K. Gaubinger, H. Kindermann) - Gabler Verlag, 2006, pp. 57-70 |
| 2006 | Fallstudie ABATEC Electronic AG: Situationsanalyse eines High Tech Unternehmens K. Gaubinger - Fallstudie ABATEC Electronic AG: Situationsanalyse eines High Tech Unternehmens in Praxisorientiertes Business-to-Business-Marketing: Grundlagen und Fallstudien aus Unternehmen (Editors: T. Werani, K. Gaubinger, H. Kindermann) - Gabler Verlag, 2006, pp. 85-98 |
| 2006 | Fallstudie Format Werk GmbH: Kundenzufriedenheitsanalyse im Büroartikelmarkt D. Eyett, K. Gaubinger - Fallstudie Format Werk GmbH: Kundenzufriedenheitsanalyse im Büroartikelmarkt in Praxisorientiertes Business-to-Business-Marketing: Grundlagen und Fallstudien aus Unternehmen (Editors: T. Werani, K. Gaubinger, H. Kindermann) - Gabler Verlag, 2006, pp. 99-110 |
| 2006 | Fallstudie TYROLIT Schleifmittelwerke Swarovski K.G.: Marktexpansion in Osteuropa R. Daubeck, K. Gaubinger - Fallstudie TYROLIT Schleifmittelwerke Swarovski K.G.: Marktexpansion in Osteuropa in Praxisorientiertes Business-to-Business-Marketing: Grundlagen und Fallstudien aus Unternehmen (Editors: T. Werani, K. Gaubinger, H. Kindermann) - Gabler Verlag, 2006, pp. 211-222 |
| 2006 | Fallstudie Fill Maschinen- und Anlagenbau: Marketingaktivitäten im internationalen Anlagenbau K. Gaubinger - Fallstudie Fill Maschinen- und Anlagenbau: Marketingaktivitäten im internationalen Anlagenbau in Praxisorientiertes Business-to-Business-Marketing: Grundlagen und Fallstudien aus Unternehmen (Editors: T. Werani, K. Gaubinger, H. Kindermann) - Gabler Verlag, 2006, pp. 223-235 |
| 2006 | Fallstudie FREQUENTIS GmbH: FREQUENTIS Emergency Network für die Philippinen R. Daubeck, K. Gaubinger - Fallstudie FREQUENTIS GmbH: FREQUENTIS Emergency Network für die Philippinen in Praxisorientiertes Business-to-Business-Marketing: Grundlagen und Fallstudien aus Unternehmen (Editors: T. Werani, K. Gaubinger, H. Kindermann) - Gabler Verlag, 2006, pp. 249-262 |
| 2006 | Grundlagen des Marketing Controllings K. Gaubinger - Grundlagen des Marketing Controllings in Praxisorientiertes Business-to-Business-Marketing: Grundlagen und Fallstudien aus Unternehmen (Editors: T. Werani, K. Gaubinger, H. Kindermann) - Gabler Verlag, 2006, pp. 279-295 |
| 2006 | NET-Programming-Curriculum Inside-Out – It’s working now! J. Schulze, J. D. Hallewell Haslwanter, C. Derndorfer, M. Längrich, A. Meyer - NET-Programming-Curriculum Inside-Out – It’s working now! - Proceedings of the International Conference Interactive Computer Aided Learning ICL2006, Villach, Österreich, 2006, pp. 8 |
| 2006 | The optimal control of a general tandem queue J. Weichbold, K. Schiefermayr - The optimal control of a general tandem queue - PROBABILITY IN THE ENGINEERING AND INFORMATIONAL SCIENCES, Vol. 66, No. 2, 2006, pp. 307-327 |
| 2006 | Automatic control application recovery in distributed IEC 61499 based automation and control systems R. Froschauer, F. Auinger, T. Strasser, G. Grabmair - Automatic control application recovery in distributed IEC 61499 based automation and control systems - Proceedings of the IEEE Workshop on Distributed Intelligent Systems: Collective Intelligence and Its Applications (DIS'06), Prague, Tschechische Republik, 2006, pp. 103-108 |
| 2006 | MEROS® — Improved Dry-Type Gas-Cleaning Process for the Treatment of Sinter Off-gas A. Fleischanderl, C. Lanzerstorfer, R. Neuhold, G. Meierhofer - MEROS® — Improved Dry-Type Gas-Cleaning Process for the Treatment of Sinter Off-gas - Proceedings IS 06 (Iron&Steelmaking Conference 2006), Linz, Österreich, 2006, pp. 1-6 |
| 2006 | Besonderheiten der Unternehmensbewertung bei technologieorientierten Untenehmensgründungen W. Girkinger, V. Purtscher - Besonderheiten der Unternehmensbewertung bei technologieorientierten Untenehmensgründungen - ControllerNews, Vol. 2006, No. 4, 2006, pp. 22-27 |
| 2006 | Innovationscontrolling, Toolbox zur Steigerung des Unternehmenserfolges W. Girkinger, K. Gaubinger - Innovationscontrolling, Toolbox zur Steigerung des Unternehmenserfolges - INSIGHT, Vol. 2006, No. 1, 2006, pp. 40-41 |
| 2006 | An Event-based Communication Environment for Multi-Modal Traffic Information Systems T. J. Heistracher, R. Widmann, B. Stadlmann, J. Zellinger - An Event-based Communication Environment for Multi-Modal Traffic Information Systems - Proceedings of the 9th International IEEE Conference on Intelligent Transportation Systems (ITSC) 2006, Toronto, Kanada, 2006, pp. 1214-1219 |
| 2006 | Informationssystem Photovoltaik Experimentier Anlage am FH Campus Wels K. Kellermayr - Informationssystem Photovoltaik Experimentier Anlage am FH Campus Wels - Report, FH OÖ Fakultät Wels, Österreich, 2006, pp. 26 |
| 2006 | Bauphysik und Baubiologie - Grundlagen für das energieeffiziente Wohlfühlhaus H. C. Leindecker - Bauphysik und Baubiologie - Grundlagen für das energieeffiziente Wohlfühlhaus - Schönauer Expertentage, Großschönau, Österreich, 2006, pp. 93-111 |
| 2006 | Nondestructive testing of CFRP aerospace components G. Mayr, G. Zauner, G. Hendorfer - Nondestructive testing of CFRP aerospace components - Proceedings of Aeronautics Days 2006, Wien, Österreich, 2006, pp. 8 |
| 2006 | Aktive Thermographie und Shearographie G. Mayr, G. Zauner, G. Hendorfer, M. Haslhofer, R. Pree - Aktive Thermographie und Shearographie - Tagungsband Symposium Optosensorik in der Produktion,, Regensburg, Deutschland, 2006, pp. 117-123 |
| 2006 | Advanced applications of computed tomography by combination of different methods J. Kastner, D. Heim, D. Salaberger - Advanced applications of computed tomography by combination of different methods - Proceedings of European Conference on Non-Destructive Testing 2006, Berlin, Deutschland, 2006, pp. 12 |
| 2006 | Optical Crack Detection of Refractory Bricks F. Mayrhofer, K. Niel - Optical Crack Detection of Refractory Bricks - Proceedings of European Conference on Non-Destructive Testing 2006, Berlin, Deutschland, 2006, pp. 7 |
| 2006 | Robust surface detection for variance comparison C. Heinzl, R. Klingesberger, E. Gröller, J. Kastner - Robust surface detection for variance comparison - Proceedings of Eurographics/IEEE VGTC Symposium on Visualisation, Lissabon, Portugal, 2006, pp. 75-82 |
| 2006 | Stability Analysis of Relative Equilibria of Mechanical Systems with Cyclic Coordinates W. Steiner - Stability Analysis of Relative Equilibria of Mechanical Systems with Cyclic Coordinates - ARCHIVE OF APPLIED MECHANICS, Vol. 2006, No. 75, 2006, pp. 355-363 |
| 2006 | Charakterisierung der Graphitverteilung in Sphäroguss B. Tomic, B. Harrer, A. Kottar, H. Degischer, L. Zeipper, J. Kastner - Charakterisierung der Graphitverteilung in Sphäroguss - Fortschritte in der Metallographie, Leoben, Österreich, 2006, pp. 113-120 |
| 2006 | Application of wavelet analysis in active thermography for non-destructive testing of CFRP composites G. Zauner, G. Mayr, G. Hendorfer - Application of wavelet analysis in active thermography for non-destructive testing of CFRP composites - Wavelet Applications in Industrial Processing IV, Boston, Vereinigte Staaten von Amerika, 2006, pp. 12 |
| 2006 | Online Monitoring and Control of Thermochemical Heat Treatment Processes by Near Infrared Technology G. Darilion, F. Mayrhofer, G. Zauner - Online Monitoring and Control of Thermochemical Heat Treatment Processes by Near Infrared Technology - Proc. 15th IFHTSE and SMT 20, Vienna, Österreich, 2006, pp. 10 |
| 2006 | CCD-Kamera basiertes Nahinfrarot-Wärmebildsystem zur Prozesskontrolle in der Plasma-Wärmebehandlung G. Zauner, G. Hendorfer - CCD-Kamera basiertes Nahinfrarot-Wärmebildsystem zur Prozesskontrolle in der Plasma-Wärmebehandlung - Optosensorik in der industriellen Anwendung, Regensburg, Deutschland, 2006, pp. 5 |
| 2006 | Denoising of Computed Tomography Images using Multiresolution Based Methods G. Zauner, M. Reiter, J. Kastner - Denoising of Computed Tomography Images using Multiresolution Based Methods - Proceedings of European Conference on Non-Destructive Testing 2006, Berlin, Deutschland, 2006, pp. 9 |
| 2006 | Automation of Operational Train Control on Regional Branch Lines by a Basic Train Control System B. Stadlmann - Automation of Operational Train Control on Regional Branch Lines by a Basic Train Control System - Proceedings of the 9th International IEEE Conference on Intelligent Transportation Systems (ITSC) 2006, Toronto, Kanada, 2006, pp. 50-54 |
| 2006 | IO Module für die PC gestützte Messdatenerfassun K. Kellermayr - IO Module für die PC gestützte Messdatenerfassun - Report, FH OÖ Fakultät Wels, Österreich, 2006, pp. 1-11 |
| 2006 | Objektorientierte Programmierung - integrierte Anwendungen basierend auf Microsoft Office K. Kellermayr - Objektorientierte Programmierung - integrierte Anwendungen basierend auf Microsoft Office - Report, FH OÖ Fakultät Wels, Österreich, 2006, pp. 1-8 |
| 2006 | Übersicht zu Windows Scripting Host und Windows Management Instrumentierung K. Kellermayr - Übersicht zu Windows Scripting Host und Windows Management Instrumentierung - Report, FH OÖ Fakultät Wels, Österreich, 2006, pp. 1-10 |
| 2006 | Quantitative Determination of Porosity by Active Thermography G. Hendorfer, G. Mayr, G. Zauner, M. Haslhofer, R. Pree - Quantitative Determination of Porosity by Active Thermography - American Institute of Physics Conference Proceedings, Vol.894, Portland/ Oregon, Vereinigte Staaten von Amerika, 2006, pp. 702-708 |
| 2005 | Einfluss von Holzgaskomponenten auf die Leistung einer mikrotubulären SOFC-Brennstoffzelle G. Buchinger, P. Hinterreiter, T. Raab, S. Griesser, D. Meissner - Einfluss von Holzgaskomponenten auf die Leistung einer mikrotubulären SOFC-Brennstoffzelle - Proceedings of the 12. Symposium Nutzung Regenerativer Energiequellen und Wasserstofftechnik, Stralsund, Deutschland, 2005, pp. 31-35 |
| 2005 | Production of Microtubular SOFC Fuel Cells and Their Use in Stacks With Ultra Short Warm-Up Time T. Raab, S. Griesser, G. Buchinger, K. Koke, D. Meissner - Production of Microtubular SOFC Fuel Cells and Their Use in Stacks With Ultra Short Warm-Up Time - Proceedings of the 1st European Fuel Cell Technology and Applications Conference 2005, Rom, Italien, 2005, pp. 37 |
| 2005 | Operating micro-tubular SOFCs with wood-gas components G. Buchinger, P. Hinterreiter, T. Raab, S. Griesser, D. Meissner - Operating micro-tubular SOFCs with wood-gas components - Proceedings of the 1st European Fuel Cell Technology and Applications Conference 2005, Rom, Italien, 2005, pp. 64 |
| 2005 | Characterisation of fuel cells and fuel cell systems using 3D x-ray tomography S. Griesser, G. Buchinger, T. Raab, D. Meissner - Characterisation of fuel cells and fuel cell systems using 3D x-ray tomography - Proceedings of the 1st European Fuel Cell Technology and Applications Conference 2005, Rom, Italien, 2005, pp. 198 |
| 2005 | Charakterisierung von Brennstoffzellen und Brennstoffzellensystemen mit Computertomographie S. Griesser, G. Buchinger, T. Raab, R. Hiesgen, D. Meissner - Charakterisierung von Brennstoffzellen und Brennstoffzellensystemen mit Computertomographie - -Berichtsband of DGZfP-Jahrestagung 2005, Rostock, Deutschland, 2005, pp. 6 |
| 2005 | A complete solution for the optimal stochastic scheduling of a two-stage tandem queue with two flexible servers K. Schiefermayr, J. Weichbold - A complete solution for the optimal stochastic scheduling of a two-stage tandem queue with two flexible servers - JOURNAL OF APPLIED PROBABILITY, Vol. 42, No. 1, 2005, pp. 778-796 |
| 2005 | Some new properties of Jacobi's theta functions K. Schiefermayr - Some new properties of Jacobi's theta functions - JOURNAL OF COMPUTATIONAL AND APPLIED MATHEMATICS, Vol. 178, No. 2, 2005, pp. 419-424 |
| 2005 | Blower Door Test und Gebäudethermografie an der FH Wels H. C. Leindecker - Blower Door Test und Gebäudethermografie an der FH Wels - IBO-Magazin, Vol. 2005, No. 1, 2005, pp. 14-15 |
| 2005 | Öko-Energietechnik H. C. Leindecker - Öko-Energietechnik - 9. Internationale Passivhaustagung, Ludwigshafen, Deutschland, 2005, pp. 663-664 |
| 2005 | Haus der Zukunft an der FH Wels H. C. Leindecker - Haus der Zukunft an der FH Wels - Haus der Zukunft, Wels, Österreich, 2005, pp. 30 |
| 2005 | Wavelet coherence analysis applied to laser vibrometry measurements G. Zauner, C. Ramsauer, G. Hendorfer - Wavelet coherence analysis applied to laser vibrometry measurements - SPIE Optics East - Wavelets Applications in Industrial Processing V (vol. 6763), Boston, Vereinigte Staaten von Amerika, 2005, pp. 10 |
| 2005 | Multiscale segmentation method for small inclusion detection in 3D industrial computed tomography G. Zauner, B. Harrer, D. Angermaier, J. Kastner - Multiscale segmentation method for small inclusion detection in 3D industrial computed tomography - Optical Measurement Systems for Industrial Inspection , Munich, Deutschland, 2005, pp. 10 |
| 2005 | CCD based emissivity measurements for surface characterization in G. Zauner, G. Darilion, D. Heim, G. Hendorfer, T. Müller - CCD based emissivity measurements for surface characterization in - Optical Measurement Systems for Industrial Inspection , Munich, Deutschland, 2005, pp. 8 |
| 2005 | Multispectral thermal imaging with CCD camera system G. Zauner, G. Darilion, G. Hendorfer, D. Heim - Multispectral thermal imaging with CCD camera system - 2nd International Spectral Imaging Workshop, Villach, Österreich, 2005, pp. 8 |
| 2005 | Multiresolution denoising of CCD thermal images for improved spatial temperature resolution G. Zauner, G. Hendorfer - Multiresolution denoising of CCD thermal images for improved spatial temperature resolution - Wavelets in Industrial Applications, Boston, Vereinigte Staaten von Amerika, 2005, pp. 12 |
| 2005 | Online inspection of thermo-chemical heat treatment processes with CCD camera system G. Zauner, G. Darilion, R. Pree, D. Heim, G. Hendorfer - Online inspection of thermo-chemical heat treatment processes with CCD camera system - Two- and Three-Dimensional Methods for Inspection and Metrology III , Boston, Vereinigte Staaten von Amerika, 2005, pp. 9 |
| 2005 | CCD Kamera als innovatives Wärmebildsystem G. Zauner, G. Darilion, D. Heim, G. Hendorfer - CCD Kamera als innovatives Wärmebildsystem - Proceedings of FH Science Day 2005, Steyr, Österreich, 2005, pp. 168-173 |
| 2004 | Innovationscontrolling - "Controlling The Uncontrollable"? Teil II W. Girkinger, B. Lindorfer - Innovationscontrolling - "Controlling The Uncontrollable"? Teil II - Controller News, Vol. 2004, No. 5, 2004, pp. 150-153 |
| 2004 | Innovationscontrolling "Controlling The Uncontrollable"? Teil I W. Girkinger, B. Lindorfer - Innovationscontrolling "Controlling The Uncontrollable"? Teil I - Controller News, Vol. 2004, No. 4, 2004, pp. 127-131 |
| 2004 | Verdichtete Bebauungsstrukturen als kinderfreundliche Wohnumwelt in der Stadt H. C. Leindecker - Verdichtete Bebauungsstrukturen als kinderfreundliche Wohnumwelt in der Stadt - ISBN 3-8255-0460-3, published by Centaurus, Herbholzheim, 2004, pp. 208 |
| 2004 | Description of inverse polynomial images which consist of two Jordan arcs with the help of Jacobi's elliptic functions K. Schiefermayr - Description of inverse polynomial images which consist of two Jordan arcs with the help of Jacobi's elliptic functions - COMPUTATIONAL METHODS AND FUNCTION THEORY, Vol. 4, No. 2, 2004, pp. 355-390 |
| 2004 | Raumflugmechanik W. Steiner - Raumflugmechanik - Springer Verlag, 2004 |
| 2004 | Image processing of CCD-based dualband temperature maps G. Zauner, D. Heim, H. Störi, G. Hendorfer, K. Niel - Image processing of CCD-based dualband temperature maps - Digital Imaging in Media and Education, Hagenberg, Österreich, 2004, pp. 8 |
| 2004 | Processing of low-intensity CCD images for temperature mapping in industrial processes G. Zauner, D. Heim, G. Hendorfer, H. Störi, K. Niel - Processing of low-intensity CCD images for temperature mapping in industrial processes - Optical Metrology in Production Engineering, Strasbourg, Frankreich, 2004, pp. 10 |
| 2004 | CCD Cameras as thermal imaging devices in heat treatment processes G. Zauner, D. Heim, G. Hendorfer, H. Störi, K. Niel - CCD Cameras as thermal imaging devices in heat treatment processes - Machine Vision Applications in Industrial Inspection XII , San Jose, Vereinigte Staaten von Amerika, 2004, pp. 10 |
| 2003 | Temperature mapping in heat treatment processes with a standard color-video camera by means of image processing G. Zauner, D. Heim, G. Hendorfer, K. Niel - Temperature mapping in heat treatment processes with a standard color-video camera by means of image processing - SPIE Machine Vision Applications in Industrial Inspection XI, San Jose, Vereinigte Staaten von Amerika, 2003, pp. 10 |
| 2001 | Mobile communication for supervisory control and data acquisition K. Kellermayr - Mobile communication for supervisory control and data acquisition - TCMC2001, Graz, Österreich, 2001, pp. 5 |
| 2000 | Time domain evaluation of resonance antireflection (RAR) signals for ultrasonic density measurement M. Rabl - Time domain evaluation of resonance antireflection (RAR) signals for ultrasonic density measurement - IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, Vol. 47, No. 6, 2000, pp. 1530-1539 |
| 2000 | Analysis of SAW Interdigital Transducers as Waveguides with N Acoustic Regions M. Jungwirth - Analysis of SAW Interdigital Transducers as Waveguides with N Acoustic Regions - Proceedings 2001 IEEE International Ultrasonics Symposium, San Juan, Puerto Rico, Vereinigte Staaten von Amerika, 2000, pp. 121-125 |
| 2000 | Analysis of General Planar Waveguides with N Segments M. Jungwirth - Analysis of General Planar Waveguides with N Segments - Proceedings 2001 IEEE International Ultrasonics Symposium, San Juan, Puerto Rico, Vereinigte Staaten von Amerika, 2000, pp. 137-141 |
| 2000 | Technische Informatik K. Kellermayr - Technische Informatik - Springer Verlag, 2000, pp. 1-384 |
| 1999 | Improved Time Domain Diffraction Analysis for SAW Transducers of Arbitrary Shape M. Jungwirth - Improved Time Domain Diffraction Analysis for SAW Transducers of Arbitrary Shape - Proceedings IEEE International Ultrasonics Symposium, Lake Tahoe, Nevada, Vereinigte Staaten von Amerika, 1999, pp. 97-100 |
| 1995 | Integrated Computer Systems in Metalurgical Plants K. Kellermayr - Integrated Computer Systems in Metalurgical Plants - Automation 95, Helsinki, Finnland, 1995, pp. 245-256 |
| 1994 | Elastic Multibody Simulation of the Crankdrive with Nonlinear Oilfilm – Structure Interaction W. Witteveen - Elastic Multibody Simulation of the Crankdrive with Nonlinear Oilfilm – Structure Interaction - Master/Diploma Thesis, Johannes Kepler Universität Linz, Österreich, 1994 |
Projekte:
Patente:
| 2008 |
Method for detecting foreign matters G. Grabmair - Method for detecting foreign matters, 2008 ... |
| 2008 |
Verfahren zur Detektion eines Fremdkörpers G. Grabmair - Verfahren zur Detektion eines Fremdkörpers, 2008 ... |
| 2008 |
CONTROL METHOD AND CONTROL ELEMENT FOR A MECHANICAL-HYDRAULIC SYSTEM G. Grabmair, G. KEINTZEL , K. SCHLACHER - CONTROL METHOD AND CONTROL ELEMENT FOR A MECHANICAL-HYDRAULIC SYSTEM , 2008 ... |
| 2008 |
Solare Kondensationsanlage mit Kaskadenverdunstung R. Kraft, J. Kastner - Solare Kondensationsanlage mit Kaskadenverdunstung, 2008 ... |
| 2007 |
VERFAHREN ZUM MESSEN DER SCHLIESSKRAFT EINER SPRITZGIESSMASCHINE G. Grabmair, H. Bernha - VERFAHREN ZUM MESSEN DER SCHLIESSKRAFT EINER SPRITZGIESSMASCHINE, 2007 ... |
| 2007 |
Energy Bier A. Jäger - Energy Bier, 2007 ... |
| 2006 |
Prozess zur Herstellung einer Mischung, die zumindest ein Xanthphyll enthält. T. Eidenberger - Prozess zur Herstellung einer Mischung, die zumindest ein Xanthphyll enthält., 2006 ... |
| 2006 |
CONTROL METHOD AND CONTROL ELEMENT FOR A MECHANICAL-HYDRAULIC SYSTEM G. Grabmair, G. KEINTZEL , K. SCHLACHER - CONTROL METHOD AND CONTROL ELEMENT FOR A MECHANICAL-HYDRAULIC SYSTEM, 2006 ... |
| 2005 |
Marke Sündenbock A. Jäger - Marke Sündenbock, 2005 ... |
Kooperationen:
|
EUROCOPTER |
|
FACC - Fischer Advanced Composite Components |
|
Johannes-Kepler-Universität |
|
Keba AG |
|
Rosenbauer International AG Feuerlöschsysteme |
|
Software Competence Center Hagenberg (SCCH) |

