Forschungseinheit
Research Center Wels
Beschreibung:
Leitung:
Personen:
- Martin Aigner BSc
- Bernhard Berger B.Sc.
- DI (FH) Raimund Edlinger
- Bernhard Eichinger BSc
- Katharina Eisenhuber B.Sc.
- Christian Endtmayer BSc
- Simon Engler BSc
- Bakk. rer.nat Doris Christina Fleischer
- DI Dr. Christian Forsich
- Viktoria Franz BSc
- Mag. Iris Gabriel
- Kerstin Göttfried BSc
- DI (FH) Jürgen Gruber
- DI Christian Gusenbauer
- Dipl. Des. (FH) Susann Hahnwald
- DI (FH) Gerhard Hanis MSc
- DI (FH) Wolfgang Hauer
- DI (FH) Dr. Christoph Heinzl
- Mario Hettegger BSc
- DI (FH) Stephan Hutterer
- Thomas Iglseder BSc
- Mag. Dr. Heike Kahr
- Martin Kasper BSc
- DI (FH) Christian Kneidinger BSc MSc
- Christian Kohlberger BSc
- Thomas Koniarek BSc
- Dominik Kovacs BSc
- DI (FH) Klaus Krennhuber
- Andreas Lang BSc
- DI (FH) Keyan Liu MSc
- DI (FH) Stefan Mairhofer
- Thomas Obrlik
- DI (FH) Bernhard Plank
- Ulrich Pschebezin BSc
- DI (FH) Philipp Punzhuber
- Carlo Augusto Puppo Bigarella BSc
- Andreas Reh MSc
- Stefan Reif BSc
- Martin Richter B.Sc.
- Bernhard Markus Riedl BSc
- DI Tonja Schedenig
- Lukas Schlossinger
- Christopher Schüller
- Philipp Schuster BSc
- DI Zeljka Simicevic
- Mag. Elena Spitzer
- Ing. Harald Stadler B.Sc.
- Christoph Stallinger BSc
- Daniel Steindl BSc
- Katharina Steineder BSc
- Andrea Steininger
- DI (FH) Viktoria Steinmüller
- Ing. Josef Helmut Suchan
- Dr. Julian Weghuber
- DI (FH) Heinz Weinzierl
- Norbert Wolfgang Wild BSc
- Julia Katharina Wimberger BSc
Publikationen:
| 2012 | Optimal Scheduling of Electric Individual Traffic Under Probabilistic Conditions S. Hutterer, F. Auinger, M. Affenzeller - Optimal Scheduling of Electric Individual Traffic Under Probabilistic Conditions - Tagungsband FFH 2012, Graz, Österreich, 2012 |
| 2012 | Analytical and Numerical Methods for the Design of Maddock Mixers in Single Screw Plasticizing Technology M. Olbrich, G. Zitzenbacher, C. Hochenauer, C. Kneidinger, V. Lawlor - Analytical and Numerical Methods for the Design of Maddock Mixers in Single Screw Plasticizing Technology - MACROMOLECULAR SYMPOSIA, Vol. 311, No. 1, 2012, pp. 83-91 |
| 2012 | Optimal Specimen Placement in Cone Beam X-ray Computed Tomography C. Heinzl, J. Kastner, A. Amirkhanov, E. Gröller, C. Gusenbauer - Optimal Specimen Placement in Cone Beam X-ray Computed Tomography - NDT & E INTERNATIONAL, Vol. 99, No. 99, 2012, pp. 1-25 |
| 2011 | Improvements in Bioethanol Production from straw H. Kahr, S. Helmberger, A. Jäger - Improvements in Bioethanol Production from straw - Tagungsband FFH 2011 (5. Forschungsforum der österreichischen Fachhochschulen), Wien (Favoriten), Österreich, 2011, pp. 34-37 |
| 2011 | Cationic amphipathic peptides accumulate sialylated proteins and lipids in the plasma membrane of eukaryotic host cells J. Weghuber - Cationic amphipathic peptides accumulate sialylated proteins and lipids in the plasma membrane of eukaryotic host cells - BIOCHIMICA ET BIOPHYSICA ACTA-BIOMEMBRANES, Vol. 1808, No. 10, 2011, pp. 2581-2590 |
| 2011 | Entwicklung einer Methode zur Simulation von Kurzzeitwärmebehandlungen an Mikrokerbschlagproben für die Prüfung der Zähigkeit von hochfesten Schweißzusätzen T. Schlagradl, R. Schneider, G. Posch, R. Schnitzer - Entwicklung einer Methode zur Simulation von Kurzzeitwärmebehandlungen an Mikrokerbschlagproben für die Prüfung der Zähigkeit von hochfesten Schweißzusätzen - 18. Internationaler Studententag der Metallurgie, Leoben, Österreich, 2011, pp. 71-79 |
| 2011 | Study of heat transfer in dispersive mixers at high screw speeds. M. Olbrich, G. Zitzenbacher, C. Hochenauer - Study of heat transfer in dispersive mixers at high screw speeds. - PPS-27 (Proceedings), Marrakesh, Marokko, Marokko, 2011, pp. 4 |
| 2011 | Yeast adaption on the substrate straw D. Steindl, H. Kahr, S. Helmberger, A. Jäger - Yeast adaption on the substrate straw - Tagungsband FFH 2011 (5. Forschungsforum der österreichischen Fachhochschulen), Wien (Favoriten), Österreich, 2011, pp. 2 |
| 2011 | Projection-Based Metal-Artifact Reduction for Industrial 3D X-ray Computed Tomography A. Amirkhanov, C. Heinzl, M. Reiter, J. Kastner, E. Gröller - Projection-Based Metal-Artifact Reduction for Industrial 3D X-ray Computed Tomography - IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS, Vol. 17, No. 12, 2011, pp. 2193-2202 |
| 2011 | Atomic Force microscopy, A New Supporting Tool in Brain Tumor Diagnosis M. Plöderl, G. Zauner, R. Silye, S. Hutterer, K. Schilcher - Atomic Force microscopy, A New Supporting Tool in Brain Tumor Diagnosis - Nanoscale 2011, Santa Barbara, Vereinigte Staaten von Amerika, 2011, pp. 82 |
| 2011 | Utilization of wheat- and maize straw in biogas plants A. Jäger, S. Helmberger, A. Eder, P. Lanzerstorfer, C. Lanzerstorfer - Utilization of wheat- and maize straw in biogas plants - Proceedings Central European Biomass Conference Graz 2011, Graz, Österreich, 2011, pp. 150 |
| 2011 | Neubewertung potentieller Fermentations-Inhibitoren bei der Herstellung von Bioethanol der 2. Generation K. Krennhuber, A. Jäger - Neubewertung potentieller Fermentations-Inhibitoren bei der Herstellung von Bioethanol der 2. Generation - Tagungsband FFH 2011 (5. Forschungsforum der österreichischen Fachhochschulen), Wien (Favoriten), Österreich, 2011 |
| 2011 | Analytisches Berechnungsmodell für die verfahrenstechnische Auslegung von Maddock- und Wendelnutenscherteilen in der Kunststoffverarbeitung G. Zitzenbacher, M. Olbrich, C. Hochenauer - Analytisches Berechnungsmodell für die verfahrenstechnische Auslegung von Maddock- und Wendelnutenscherteilen in der Kunststoffverarbeitung - Tagungsband FFH 2011 (5. Forschungsforum der österreichischen Fachhochschulen), Wien (Favoriten), Österreich, 2011, pp. 4 |
| 2011 | Influence of pellet shape and size on friction of polymer pellets in single screw plasticizing units K. Liu, G. Zitzenbacher, C. Kneidinger, D. Heim, B. Edlinger, G. Schaffler - Influence of pellet shape and size on friction of polymer pellets in single screw plasticizing units - Advances in Polymer Science and Technology 2, Linz, Österreich, 2011 |
| 2011 | Wann gibt es Biosprit aus Stroh H. Kahr, A. Jäger - Wann gibt es Biosprit aus Stroh - Inform, Vol. 2, No. 3, 2011, pp. 15-20 |
| 2011 | Simulations-basiertes heuristisches Sampling zur Integration erzeuger- und verbraucherseitiger unsicherer Einflüsse S. Hutterer, F. Auinger, M. Affenzeller - Simulations-basiertes heuristisches Sampling zur Integration erzeuger- und verbraucherseitiger unsicherer Einflüsse - ComForEn 2011 - Kommunikation für Energienetze der Zukunft, Wels, Österreich, 2011 |
| 2011 | Röntgen-Computertomografie der Verformungsporen in Warmzugproben aus Baustahlbrammen M. Hochegger, B. Harrer, H. Degischer, S. Ilie - Röntgen-Computertomografie der Verformungsporen in Warmzugproben aus Baustahlbrammen - Materialographie Metalle - Keramik -Polymere, Karlsruhe, Deutschland, 2011, pp. 1-6 |
| 2011 | Entwicklung einer Methode zur Simulation von Kurzzeitwärmebehandlungen an Mikrokerbschlagproben für die Prüfung der Zähigkeit von hochfesten Schweißzusätzen T. Schlagradl, R. Schneider, G. Posch, R. Schnitzer - Entwicklung einer Methode zur Simulation von Kurzzeitwärmebehandlungen an Mikrokerbschlagproben für die Prüfung der Zähigkeit von hochfesten Schweißzusätzen - Berg- und Hüttenmännische Monatshefte, Vol. 156, No. 3, 2011, pp. 93-98 |
| 2011 | Influence of surface roughness on the external coefficient of friction of polymer pellets in single screw plasticizing units. G. Zitzenbacher, K. Liu, C. Kneidinger - Influence of surface roughness on the external coefficient of friction of polymer pellets in single screw plasticizing units. - PPS-27 (Proceedings), Marrakesh, Marokko, Marokko, 2011, pp. 4 |
| 2011 | Aufbau und Inbetriebnahme einer Versuchs-ESU-Anlage R. Schneider, A. Paar, P. Zeller, G. Reiter, W. Schützenhöfer, P. Würzinger - Aufbau und Inbetriebnahme einer Versuchs-ESU-Anlage - Berg- und Hüttenmännische Monatshefte, Vol. 156, No. 3, 2011 |
| 2011 | Atomic force microscopy and brain tumor diagnosis M. Plöderl, R. Silye, G. Zauner, S. Hutterer, K. Schilcher - Atomic force microscopy and brain tumor diagnosis - ISPM 2011, München, Deutschland, 2011, pp. 100 |
| 2011 | Fast Estimation of Optimal Specimen Placements in 3D X-ray Computed Tomography C. Heinzl, J. Kastner, A. Amirkhanov, E. Gröller, M. Reiter - Fast Estimation of Optimal Specimen Placements in 3D X-ray Computed Tomography - International Symposium on Digital Industrial Radiology and Computed Tomography 2011, Berlin, Deutschland, 2011 |
| 2011 | Heatsink design for optimal thermal management D. Hofinger, M. Jungwirth - Heatsink design for optimal thermal management - Proceedings EuroSimE 2011, Linz, Österreich, 2011, pp. 4 |
| 2011 | Production of biogas from orange peels A. Jäger, D. Steindl, V. Steinmüller - Production of biogas from orange peels - Tagungsband FFH 2011 (5. Forschungsforum der österreichischen Fachhochschulen), Wien (Favoriten), Österreich, 2011, pp. 52-53 |
| 2011 | Metallographische Untersuchungen zur Findung der Generierparameter einer Metall-Keramik- Mischung für das Selektives Laser Sintern (SLS) C. Voit, A. Huskic - Metallographische Untersuchungen zur Findung der Generierparameter einer Metall-Keramik- Mischung für das Selektives Laser Sintern (SLS) - Materialographie Metalle - Keramik -Polymere, Karlsruhe, Deutschland, 2011 |
| 2011 | Study on the Correlation of the elongation modulus at elevated temperatures and the temperature dependent flexural modulus from DMA measurements of a PP homopolymer J. F. Pühringer, C. Maier, G. Zitzenbacher - Study on the Correlation of the elongation modulus at elevated temperatures and the temperature dependent flexural modulus from DMA measurements of a PP homopolymer - Advances in Polymer Science and Technology 2, Linz, Österreich, 2011, pp. 62 |
| 2011 | Electronic Platform for Small Robots in Education M. Zauner, R. Edlinger, W. Rokitansky - Electronic Platform for Small Robots in Education - 2nd International Conference on Robotics in Education, Vienna, Österreich, 2011, pp. 125-128 |
| 2011 | X-ray Microtomography: characterisation of structures and defect analysis B. Harrer, J. Kastner - X-ray Microtomography: characterisation of structures and defect analysis in Fabrication and Characterization in the Micro-Nano Range - Springer Verlag, 2011, pp. 119-150 |
| 2011 | Influence of glass fibre content in polypropylene on the abrasion wear in a rectangular extrusion slit die B. Edlinger, G. Schaffler, C. Burgstaller, G. Zitzenbacher, C. Kneidinger - Influence of glass fibre content in polypropylene on the abrasion wear in a rectangular extrusion slit die - Advances in Polymer Science and Technology 2, Linz, Österreich, 2011, pp. 1 |
| 2011 | Inverse Dynamics and Trajectory Tracking of Underactuated Multibody Systems S. Reichl - Inverse Dynamics and Trajectory Tracking of Underactuated Multibody Systems - Phd Thesis, Technische Universität Wien, Institut für Mechanik und Mechatronik, Österreich, 2011, pp. 219 |
| 2011 | Strahlungsabsorption von Polystyrol-Halbzeugen im Thermoformprozess J. F. Pühringer, G. Zitzenbacher, C. Spreitzer - Strahlungsabsorption von Polystyrol-Halbzeugen im Thermoformprozess - Tagungsband FFH 2011 (5. Forschungsforum der österreichischen Fachhochschulen), Wien (Favoriten), Österreich, 2011, pp. 300-301 |
| 2011 | Study of heat absorption in the thermoforming process for of transparent and filled polystyrene J. F. Pühringer, G. Zitzenbacher, C. Spreitzer - Study of heat absorption in the thermoforming process for of transparent and filled polystyrene - PPS-27 (Proceedings), Marrakesh, Marokko, Marokko, 2011, pp. 118 |
| 2011 | Comparison of Austenitic High-Mn-Steels with Different Mn- and C-Contents Regarding their Processing Properties S. Hofer, M. Hartl, G. Schestak, R. Schneider, E. Arenholz, L. Samek - Comparison of Austenitic High-Mn-Steels with Different Mn- and C-Contents Regarding their Processing Properties - Berg- und Hüttenmännische Monatshefte, Vol. 156, No. 3, 2011, pp. 99-104 |
| 2011 | Heuristic Power Scheduling of Electric Vehicle Battery Charging based on Discrete Event Simulation S. Hutterer, M. Affenzeller, F. Auinger - Heuristic Power Scheduling of Electric Vehicle Battery Charging based on Discrete Event Simulation - Extended Abstracts - 13th International Conference on Computer Aided Systems Theory, Eurocast 2011, Las Palmas de Gran Canaria, Spanien, 2011 |
| 2011 | High resolution cone beam X-ray computed tomography of 3D-microstructures of cast Al-alloys J. Kastner, B. Harrer, H. Degischer - High resolution cone beam X-ray computed tomography of 3D-microstructures of cast Al-alloys - MATERIALS CHARACTERIZATION, Vol. 62, No. 1, 2011, pp. 99-107 |
| 2011 | Simulation aided study for optimising device parameters of an industrial X-ray computed tomography system for non-destructive testing and materials characterisation M. Reiter, B. Harrer, D. Salaberger, C. Heinzl, C. Gusenbauer, C. Kuhn, J. Kastner - Simulation aided study for optimising device parameters of an industrial X-ray computed tomography system for non-destructive testing and materials characterisation - International Symposium on Digital Industrial Radiology and Computed Tomography 2011, Berlin, Deutschland, 2011 |
| 2011 | Efficient Computer Based Optimization of Thermal Management in Electronic Systems M. Jungwirth, H. Weinzierl - Efficient Computer Based Optimization of Thermal Management in Electronic Systems - Proceedings of Thirteen International Conference on Computer Aided Systems Theory , Las Palmas, Spanien, 2011 |
| 2011 | Atomic force microscopy as a supporting tool in brain tumor diagnosis M. Plöderl, R. Silye, G. Zauner, S. Hutterer, K. Schilcher - Atomic force microscopy as a supporting tool in brain tumor diagnosis - Advances in Single-Molecule Research for Biology & Nanoscience, Linz, Österreich, 2011, pp. 1 |
| 2011 | Wheeled Mobile Autonomous Robot for Eurobot 2011 R. Edlinger, M. Zauner, W. Rokitansky - Wheeled Mobile Autonomous Robot for Eurobot 2011 - 2nd International Conference on Robotics in Education, Vienna, Österreich, 2011, pp. 147-150 |
| 2011 | Einteilung erneuerbarer Rohstoffe für die Bioenergieherstellung durch grundlegende chemische Charakterisierung K. Eisenhuber, K. Krennhuber, A. Jäger - Einteilung erneuerbarer Rohstoffe für die Bioenergieherstellung durch grundlegende chemische Charakterisierung - Tagungsband FFH 2011 (5. Forschungsforum der österreichischen Fachhochschulen), Wien (Favoriten), Österreich, 2011, pp. 419-420 |
| 2011 | Untersuchung der Eignung von Metall- Keramikpulvermischungen für generativ gefertigte Werkzeuge C. Voit, A. Huskic, Z. Simicevic - Untersuchung der Eignung von Metall- Keramikpulvermischungen für generativ gefertigte Werkzeuge - RTejournal - Forum für Rapid Technologie, Vol. 8, No. 14, 2011 |
| 2011 | Thermal modelling of flat plate solar collectors C. Hochenauer, B. Hunter, M. Danner, G. Zitzenbacher - Thermal modelling of flat plate solar collectors - Tagungsband FFH 2011 (5. Forschungsforum der österreichischen Fachhochschulen), Wien (Favoriten), Österreich, 2011 |
| 2011 | Evaluation of CT data from Fibre Reinforced Polymers to determine fibre length distribution D. Salaberger, K. Arunachalam Kannappan, J. Kastner, J. Reussner, T. Auinger - Evaluation of CT data from Fibre Reinforced Polymers to determine fibre length distribution - INTERNATIONAL POLYMER PROCESSING, Vol. 26, No. 3, 2011, pp. 283-291 |
| 2011 | Comparison of Austenitic High-Mn-Steels with Different Mn- and C-Contents Regarding their Processing Properties S. Hofer, M. Hartl, G. Schestak, R. Schneider, L. Samek, E. Arenholz - Comparison of Austenitic High-Mn-Steels with Different Mn- and C-Contents Regarding their Processing Properties - 18. Internationaler Studententag der Metallurgie, Leoben, Österreich, 2011, pp. 21-30 |
| 2011 | Active thermography as a quantitative method for non-destructive evaluation of porous carbon fiber reinforced polymers G. Mayr, B. Plank, J. Sekelja, G. Hendorfer - Active thermography as a quantitative method for non-destructive evaluation of porous carbon fiber reinforced polymers - NDT & E INTERNATIONAL, Vol. 44, No. 7, 2011, pp. 537-543 |
| 2011 | Erhöhte Abwärmenutzung bei Biogasanlagen durch Satelliten-BHKW C. Neumüller, C. Lanzerstorfer - Erhöhte Abwärmenutzung bei Biogasanlagen durch Satelliten-BHKW - Biogas Fachkongress, Graz, Österreich, 2011, pp. 38-46 |
| 2011 | Comparison of Metaheuristic Algorithms for Simulation Based OPF Computation S. Hutterer, F. Auinger, M. Affenzeller - Comparison of Metaheuristic Algorithms for Simulation Based OPF Computation - Proceedings EuroSimE 2011, Linz, Österreich, 2011 |
| 2011 | Optimization of a Multiphysic Device - a Comparison of a Finite-Element- and a Signal-based Simulation M. Jungwirth, B. Hansbauer - Optimization of a Multiphysic Device - a Comparison of a Finite-Element- and a Signal-based Simulation - Proceedings COMSOL Conference 2011, Stuttgart, Deutschland, 2011 |
| 2011 | Numerical and experimental determination of the influence of dispersive mixers on single screw pressure and temperature performance M. Olbrich, G. Zitzenbacher, C. Hochenauer - Numerical and experimental determination of the influence of dispersive mixers on single screw pressure and temperature performance - Advances in Polymer Science and Technology 2, Linz, Österreich, 2011 |
| 2011 | Phase contrast imaging with high resolution cone beam X-ray computed tomography J. Kastner, B. Plank, D. Salaberger - Phase contrast imaging with high resolution cone beam X-ray computed tomography - International Symposium on Digital Industrial Radiology and Computed Tomography 2011, Berlin, Deutschland, 2011 |
| 2011 | Improvements in Bioethanol Production Process from Straw H. Kahr, A. Jäger - Improvements in Bioethanol Production Process from Straw - Proceedings World Renewable Energy Congress – Linköping, Sweden, Linköping, Schweden, 2011 |
| 2011 | Adjuvating the adjuvant: facilitated delivery of an immunomodulatory oligonucleotide to TLR9 by a cationic antimicrobial peptide in dendritic cells J. Weghuber - Adjuvating the adjuvant: facilitated delivery of an immunomodulatory oligonucleotide to TLR9 by a cationic antimicrobial peptide in dendritic cells - VACCINE, Vol. 29, No. 3, 2011, pp. 426-436 |
| 2011 | Application of polymeric materials for solar thermal collectors C. Hochenauer, B. Hunter, G. Zitzenbacher, M. Danner - Application of polymeric materials for solar thermal collectors - Tagungsband FFH 2011 (5. Forschungsforum der österreichischen Fachhochschulen), Wien (Favoriten), Österreich, 2011, pp. 2 |
| 2011 | Digitale Shearografie & Aktive Thermografie - Neue Methoden der zerstörungsfreien Prüfung in der Luftfahrtindustrie J. Gruber, G. Mayr, G. Hendorfer, J. Sekelja, B. Plank - Digitale Shearografie & Aktive Thermografie - Neue Methoden der zerstörungsfreien Prüfung in der Luftfahrtindustrie - Tagungsband FFH 2011 (5. Forschungsforum der österreichischen Fachhochschulen), Wien (Favoriten), Österreich, 2011, pp. 248-251 |
| 2011 | Establishing a sustainable oriented technology development framework for medium-sized companies of the supply industry K. Gaubinger, R. Zweimüller, F. Schweitzer - Establishing a sustainable oriented technology development framework for medium-sized companies of the supply industry - Proceedings of the XXII ISPIM Conference, 12.-15. Juni, Hamburg, Hamburg, Deutschland, 2011 |
| 2011 | The Use of a High Temperature Wind Tunnel for MT-SOFC Testing---Part II: Use of Computational Fluid Dynamics Software in Order to Study Previous Measurements V. Lawlor , C. Hochenauer, S. Griesser, G. Zauner, G. Buchinger, D. Meissner, A. Olabi, K. Klein, S. Kuehn, S. Cordiner, A. Mariani - The Use of a High Temperature Wind Tunnel for MT-SOFC Testing---Part II: Use of Computational Fluid Dynamics Software in Order to Study Previous Measurements - Journal of Fuel Cell Science and Technology, Vol. 8, No. 6, 2011, pp. 1019-1031 |
| 2011 | Zerstörungsfreie Charakterisierung von heterogenen Werkstoffen bis in den sub-µm-Bereich mittels Kegelstrahl-Röntgen-Computertomografie B. Plank, B. Harrer, D. Salaberger, J. Kastner - Zerstörungsfreie Charakterisierung von heterogenen Werkstoffen bis in den sub-µm-Bereich mittels Kegelstrahl-Röntgen-Computertomografie - Tagungsband FFH 2011 (5. Forschungsforum der österreichischen Fachhochschulen), Wien (Favoriten), Österreich, 2011, pp. 232-235 |
| 2011 | Bioethanol aus Stroh, eine echte Alternative für Österreich? H. Kahr, A. Eder, K. Krennhuber, T. Raab, A. Jäger - Bioethanol aus Stroh, eine echte Alternative für Österreich? - Proceedings Central European Biomass Conference Graz 2011, Graz, Österreich, 2011, pp. 156 |
| 2011 | Friction between WPC Bulk Polymers and Metal Surfaces at high pressures AND HIGH Velocity C. Kneidinger, G. Zitzenbacher, M. Olbrich, K. Steinbrecher - Friction between WPC Bulk Polymers and Metal Surfaces at high pressures AND HIGH Velocity - Symposium für Polymerblends und Nanocomposites mit biobasierten Komponenten, Halle an der Saale, Deutschland, 2011, pp. 1-9 |
| 2011 | Computergestützte Evaluierung des Prozessverhaltens von dispersiven Mischelementen in Einschneckenplastifiziereinheiten M. Olbrich, G. Zitzenbacher, C. Hochenauer - Computergestützte Evaluierung des Prozessverhaltens von dispersiven Mischelementen in Einschneckenplastifiziereinheiten - Tagungsband FFH 2011 (5. Forschungsforum der österreichischen Fachhochschulen), Wien (Favoriten), Österreich, 2011 |
| 2011 | A new rheological measuring die to determine the influence of the flow channel surface on wall slippage G. Metzbauer, J. F. Pühringer, G. Zitzenbacher, P. Reven, C. Kneidinger, D. Heim - A new rheological measuring die to determine the influence of the flow channel surface on wall slippage - Advances in Polymer Science and Technology 2, Linz, Österreich, 2011, pp. 61 |
| 2011 | High resolution X-ray computed tomography for 3D-microstructure characterisation of a cellulose particle filled polymer foam J. Kastner, R. Kickinger, D. Salaberger - High resolution X-ray computed tomography for 3D-microstructure characterisation of a cellulose particle filled polymer foam - JOURNAL OF CELLULAR PLASTICS, Vol. 47, No. 1, 2011, pp. 567-578 |
| 2010 | Inegration von Leichtbau-Berechnungsmethoden in die Produktentwicklung von Landmaschinen S. Reichl, W. Steiner, M. Steinbatz, M. Hofer - Inegration von Leichtbau-Berechnungsmethoden in die Produktentwicklung von Landmaschinen in Energieeffiziente Mobilität - Shaker Verlag, 2010, pp. 141-149 |
| 2010 | Ermittlung der tribologischen Eigenschaften von Kunststoffgranulaten in Plastifiziersystemen für die Kunststoffverarbeitung C. Kneidinger, G. Zitzenbacher, A. Kögler - Ermittlung der tribologischen Eigenschaften von Kunststoffgranulaten in Plastifiziersystemen für die Kunststoffverarbeitung - Proceedings FFH 2010, Pinkafeld, Österreich, 2010, pp. 522-523 |
| 2010 | Untersuchung des Zinkabriebs beim Tiefziehen von verzinkten Feinblechen M. Kendel, A. Huskic - Untersuchung des Zinkabriebs beim Tiefziehen von verzinkten Feinblechen - 29. Verformungskundliches Kolloquium, Planneralm, Österreich, 2010, pp. 97-102 |
| 2010 | 3D Microstructure Characterization of Wood Based Panels G. Standfest, S. Kranzer, D. Salaberger, B. Plank, A. Petutschnigg, M. Dunky - 3D Microstructure Characterization of Wood Based Panels - Proceedings 1st International Conference on Processing Technologies for the Forest and Biobased Products Industries, Kuchl, Österreich, 2010, pp. 6 |
| 2010 | Artefaktreduktion mittels Dual Viewing für Röntgencomputertomographie von Multimaterialbauteilen C. Heinzl, M. Reiter, J. Kastner, E. Gröller - Artefaktreduktion mittels Dual Viewing für Röntgencomputertomographie von Multimaterialbauteilen - DGZFP-Jahrestagung 2010, Erfurt, Deutschland, 2010 |
| 2010 | Defect and porosity determination of fibre reinforced polymers by x-ray Computed Tomography J. Kastner, B. Plank, D. Salaberger, J. Sekelja - Defect and porosity determination of fibre reinforced polymers by x-ray Computed Tomography - 2nd Int. Symposium on NDT in Aerospace, Hamburg, D, Deutschland, 2010 |
| 2010 | Temporal resolution of protein-protein interactions in the live-cell plasma membrane J. Weghuber - Temporal resolution of protein-protein interactions in the live-cell plasma membrane - Analytical and Bioanalytical Chemistry, Vol. 387, No. 8, 2010 |
| 2010 | Deposition of N, F and O-doped Amorphous Carbon-Silicon Coatings in an Industrial DC-PACVD-System D. Heim, C. Forsich, T. Müller, A. Gebeshuber - Deposition of N, F and O-doped Amorphous Carbon-Silicon Coatings in an Industrial DC-PACVD-System - 12th International Conference on Plasma Surface Engineering, Garmisch-Partenkirchen, Deutschland, 2010 |
| 2010 | Mechanical Design and System Architecture of a Tracked Vehicle Robot for Urban Search and Rescue Operations R. Edlinger, M. Zauner - Mechanical Design and System Architecture of a Tracked Vehicle Robot for Urban Search and Rescue Operations in Lecture Notes in Communications in Computer and Information Science (CCIS) - Springer Verlag, 2010, pp. 12 |
| 2010 | Computed Tomography and Pulsed Thermography of Carbon Reinforced CARBON/COPPER Components for Thermonuclear Fusion J. Kastner, B. Harrer, H. Traxler - Computed Tomography and Pulsed Thermography of Carbon Reinforced CARBON/COPPER Components for Thermonuclear Fusion - Proc. of 10th European Conference on Non-Destructive Testing, Moskau, Russland, 2010 |
| 2010 | The Use of a High Temperature Wind Tunnel for MT-SOFC Testing---Part I: Detailed Experimental Temperature Measurement of an MT-SOFC Using an Avant-Garde High Temperature Wind Tunnel and Various Measurement Techniques V. Lawlor, G. Zauner, C. Hochenauer, A. Mariani, S. Griesser, J. Carton, K. Klein, S. Kuehn, A. Olabi, S. Cordiner, D. Meissner, G. Buchinger - The Use of a High Temperature Wind Tunnel for MT-SOFC Testing---Part I: Detailed Experimental Temperature Measurement of an MT-SOFC Using an Avant-Garde High Temperature Wind Tunnel and Various Measurement Techniques - Journal of Fuel Cell Science and Technology, Vol. 7, No. 6, 2010, pp. 1016-1023 |
| 2010 | Simulative Parameteroptimierung für Metrologie an Multi-Materialbauteilen mit industrieller Röntgen Computertomografie M. Reiter, C. Heinzl, D. Salaberger, D. Weiss, J. Kastner - Simulative Parameteroptimierung für Metrologie an Multi-Materialbauteilen mit industrieller Röntgen Computertomografie - Proceedings Industrielle Computertomografie Fachtagung 2010, Wels, Österreich, 2010, pp. 163-173 |
| 2010 | Vermessung der Laserbohrungen in faserverstärktem Graphit mittels Optischer Kohärenztomographie M. Wurm, C. Hofer, H. Traxler, A. Zabernig, B. Harrer - Vermessung der Laserbohrungen in faserverstärktem Graphit mittels Optischer Kohärenztomographie - Industrielle Computertomografie 2010, Wels, Österreich, 2010 |
| 2010 | Imaging of Mobile Long-lived Nanoplatforms in the Live Cell Plasma Membrane J. Weghuber - Imaging of Mobile Long-lived Nanoplatforms in the Live Cell Plasma Membrane - JOURNAL OF BIOLOGICAL CHEMISTRY, Vol. 285, No. 53, 2010, pp. 2581-2590 |
| 2010 | Subsurface Defect Characterization in Pulsed Thermography by Means of Wavelet Analysis G. Zauner, G. Mayr, G. Hendorfer - Subsurface Defect Characterization in Pulsed Thermography by Means of Wavelet Analysis - 2nd Int. Symposium on NDT in Aerospace, Hamburg, D, Deutschland, 2010 |
| 2010 | A Comparison of Model Order Reduction Methods used in different FE Software Tools M. Jungwirth, D. Hofinger, H. Weinzierl - A Comparison of Model Order Reduction Methods used in different FE Software Tools - Proceedings EUROSIME 2010, Bordeaux, France, Frankreich, 2010, pp. 5 |
| 2010 | Simulationsbasiertes Design von Energieversorgungssystemen M. Jungwirth, D. Hofinger - Simulationsbasiertes Design von Energieversorgungssystemen - Industrielles Symposium Mechatronik 2010, Linz, Österreich, 2010, pp. 258-263 |
| 2010 | Inverse Computations of Causative Vibrations in an AOD Converter S. Reichl, G. Wimmer, T. Reiter, M. Egger, W. Steiner - Inverse Computations of Causative Vibrations in an AOD Converter - Technical Report, Simulia, Österreich, 2010 |
| 2010 | Bioethanol als Kraftstoff in Österrreich H. Kahr, S. Helmberger, A. Jäger - Bioethanol als Kraftstoff in Österrreich in Energieeffiziente Mobilität - Shaker Verlag, 2010, pp. 15-24 |
| 2010 | Measuring Colocalization by Dual Color Single Molecule Imaging: Thresholds, Error Rates, and Sensitivity J. Weghuber - Measuring Colocalization by Dual Color Single Molecule Imaging: Thresholds, Error Rates, and Sensitivity in Advances in Planar Lipid Bilayers and Liposomes (Contributions to Book: Part/Chapter/Section 12), , 2010, pp. 21-24 |
| 2010 | Methode zur 3D Charakterisierung von Fasern in verstärkten Polymeren D. Salaberger, K. Arunachalam Kannappan, J. Kastner - Methode zur 3D Charakterisierung von Fasern in verstärkten Polymeren - Industrielle Computertomografie 2010, Wels, Österreich, 2010, pp. 51-58 |
| 2010 | Development of a Plastic Solar Thermal Collector C. Hochenauer, G. Zitzenbacher, M. Danner, B. Hunter, P. Orgill - Development of a Plastic Solar Thermal Collector - PMI 2010 conference book, Ghent, Belgien, 2010, pp. 8 |
| 2010 | Thermographische Untersuchungen an metallischen Proben in Kombination mit induktiver Erwärmung G. Hendorfer, G. Mayr, F. Puchberger, B. Harrer - Thermographische Untersuchungen an metallischen Proben in Kombination mit induktiver Erwärmung - Industrielles Symposium Mechatronik 2010, Linz, Österreich, 2010, pp. 47-57 |
| 2010 | Sub-Mikrometer-Computertomographie für die Charakterisierung von Holzwerkstoffen G. Standfest, D. Salaberger, B. Plank, A. Petutschnigg, M. Dunky - Sub-Mikrometer-Computertomographie für die Charakterisierung von Holzwerkstoffen - Holztechnologie, Vol. 51, No. 4, 2010, pp. 44-49 |
| 2010 | Comparative study of micro- and Sub-µm computed tomography with synchrotron tomography applied to Fe- and Al-alloys J. Kastner, B. Harrer, G. Requena, O. Brunke - Comparative study of micro- and Sub-µm computed tomography with synchrotron tomography applied to Fe- and Al-alloys - NDT & E INTERNATIONAL, Vol. 43, No. 10, 2010, pp. 599-605 |
| 2010 | Monitoring und Controlling von Photovoltaik-Anlagen H. C. Leindecker, D. Neyer, F. Vilsecker, S. Schinnerl - Monitoring und Controlling von Photovoltaik-Anlagen - 12. International FM & REM Congress Proceedings, Kufstein, Österreich, 2010, pp. 242-247 |
| 2010 | Optimal Control Methods for the Computation of Excitation Signals in Multibody Systems S. Reichl, W. Steiner, M. Steinbatz - Optimal Control Methods for the Computation of Excitation Signals in Multibody Systems - 1st Joint International Conference on Multibody System Dynamics, Lappeenranta, Finnland, 2010, pp. 10 |
| 2010 | Röntgen-Computertomografie von Werkstoffen für den Leichtbau J. Kastner, B. Harrer, D. Salaberger - Röntgen-Computertomografie von Werkstoffen für den Leichtbau in Energieeffiziente Mobilität - Shaker Verlag, 2010 |
| 2010 | Lpe10p modulates the activity of the Mrs2p-based yeast mitochondrial Mg(2+) channel J. Weghuber - Lpe10p modulates the activity of the Mrs2p-based yeast mitochondrial Mg(2+) channel - FEBS Journal, Vol. 277, No. 17, 2010 |
| 2010 | Untersuchung der Vorhydrolyse von Lignocelluloserohstoffen mittels Steam Explosion J. Lindorfer, H. Steinmüller, A. Jäger, A. Eder - Untersuchung der Vorhydrolyse von Lignocelluloserohstoffen mittels Steam Explosion - CHEMIE INGENIEUR TECHNIK, Vol. 82, No. 8, 2010, pp. 1169-1176 |
| 2010 | Simulationsbasierte Optimierung mit Metaheuristiken für Optimale Leistungsverteilung im Rahmen von Smart Electric Grids S. Hutterer, M. Affenzeller - Simulationsbasierte Optimierung mit Metaheuristiken für Optimale Leistungsverteilung im Rahmen von Smart Electric Grids in Energieeffiziente Mobilität - Shaker Verlag, 2010, pp. 75-82 |
| 2010 | CT Data Evaluation of Fibre Reinforced Polymers to Determine Fibre Length Distribution D. Salaberger, K. Arunachalam Kannappan, J. Kastner, J. Reussner, T. Auinger - CT Data Evaluation of Fibre Reinforced Polymers to Determine Fibre Length Distribution - PPS26-2010, Banff, Canada, Kanada, 2010 |
| 2010 | Simulating Evolution in Model-based Product Line Engineering W. Heider, R. Froschauer, P. Grünbacher, R. Rabiser, D. Dhungana - Simulating Evolution in Model-based Product Line Engineering - INFORMATION AND SOFTWARE TECHNOLOGY, Vol. 52, No. 7, 2010 |
| 2010 | Darstellung von Schädigungsmechanismen in Baustahlbrammen mittels Röntgen-Computertomografie M. Hochegger, B. Harrer, S. Illie, H. Degischer - Darstellung von Schädigungsmechanismen in Baustahlbrammen mittels Röntgen-Computertomografie - Industrielle Computertomografie 2010, Wels, Österreich, 2010 |
| 2010 | DETECTION OF PROTEIN-PROTEIN INTERACTIONS IN THE LIVE CELL PLASMA MEMBRANE BY QUANTIFYING PREY REDISTRIBUTION UPON BAIT MICROPATTERNING J. Weghuber - DETECTION OF PROTEIN-PROTEIN INTERACTIONS IN THE LIVE CELL PLASMA MEMBRANE BY QUANTIFYING PREY REDISTRIBUTION UPON BAIT MICROPATTERNING - METHODS IN ENZYMOLOGY, Vol. 2010, No. 472, 2010 |
| 2010 | Overview: A Simulation Based Metaheuristic Optimization Approach to Optimal Power Dispatch Related to Smart Electric Grids S. Hutterer, F. Auinger, M. Affenzeller, G. Steinmauerer - Overview: A Simulation Based Metaheuristic Optimization Approach to Optimal Power Dispatch Related to Smart Electric Grids - Life System Modeling and Intelligent Computing (LNCS 6329), Wuxi, China, 2010 |
| 2010 | Lebenszyklusanalyse eines Gebäudes T. Schrag, H. C. Leindecker, C. Wartha, W. Gollner, E. Heiduk, E. Stocker, S. Schinnerl - Lebenszyklusanalyse eines Gebäudes - Proceedings FFH 2010, Pinkafeld, Österreich, 2010, pp. 263-270 |
| 2010 | Study to Characterise the Performance of Micro Tubular Solid Oxide Fuel Cells by the Invention of an Avant GStudy to Characterise the Performance of Micro Tubular Solid Oxide Fuel Cells by the Inventiarde Experimental Apparatus and Computational Modelling V. Lawlor - Study to Characterise the Performance of Micro Tubular Solid Oxide Fuel Cells by the Invention of an Avant GStudy to Characterise the Performance of Micro Tubular Solid Oxide Fuel Cells by the Inventiarde Experimental Apparatus and Computational Modelling - Phd Thesis, Dublin City University, Irland, 2010, pp. 1-242 |
| 2010 | Comparative Visualization for Parameter Studies of Dataset Series C. Heinzl, M. M. Malik, E. Gröller - Comparative Visualization for Parameter Studies of Dataset Series - IEEE Transactions on Visualization and Computer Graphics (TVCG), Vol. 16, No. 5, 2010, pp. 829-840 |
| 2010 | High Resolution X-ray CT for Polymer Materials Science B. Plank, D. Salaberger, J. Kastner - High Resolution X-ray CT for Polymer Materials Science - 2nd Int. Symposium on NDT in Aerospace, Hamburg, D, Deutschland, 2010, pp. 3 |
| 2010 | Microfocus Computed X-ray Tomography of Segragations in High Strength Aluminium Alloys B. Harrer, J. Kastner, H. Degischer - Microfocus Computed X-ray Tomography of Segragations in High Strength Aluminium Alloys - Proc. of 10th European Conference on Non-Destructive Testing, Moskau, Russland, 2010 |
| 2010 | Antimicrobial and immunostimulatory peptide, KLK, induces an increase in cytosolic Ca(2+) concentration by mobilizing Ca(2+) from intracellular stores J. Weghuber - Antimicrobial and immunostimulatory peptide, KLK, induces an increase in cytosolic Ca(2+) concentration by mobilizing Ca(2+) from intracellular stores - CELL BIOLOGY INTERNATIONAL, Vol. 34, No. 11, 2010 |
| 2010 | OPTIMIERUNG VON HEFESTÄMMEN ZUR ETHANOL-PRODUKTION DER 2. GENERATION A. Jäger, S. Helmberger, H. Kahr - OPTIMIERUNG VON HEFESTÄMMEN ZUR ETHANOL-PRODUKTION DER 2. GENERATION - Proceedings 11. Symposium Energieinnovation, Graz, Österreich, 2010 |
| 2010 | Porositätsbestimmung in kohlefaserverstärkten Kunststoffen mittels Röntgen-Computertomografie B. Plank, J. Kastner, J. Sekelja, D. Salaberger - Porositätsbestimmung in kohlefaserverstärkten Kunststoffen mittels Röntgen-Computertomografie - Tagungsband des 4. Forschungsforum der österreichischen Fachhochschulen, Pinkafeld, Österreich, 2010, pp. 321-328 |
| 2010 | Optimales Scheduling von Ladevorgängen einer E-Flotte S. Hutterer, F. Auinger - Optimales Scheduling von Ladevorgängen einer E-Flotte in Energieeffiziente Mobilität - Shaker Verlag, 2010, pp. 36-44 |
| 2010 | Optical characterization of growing thin films at hight temperatures by analysis of near infrared emissivity variations using CCD thermal imaging G. Zauner, G. Hendorfer - Optical characterization of growing thin films at hight temperatures by analysis of near infrared emissivity variations using CCD thermal imaging - Proceedings of QIRT 2010, Quebec, Kanada, 2010 |
| 2010 | Visual Optimality and Stability Analysis of 3DCT Scan Positions C. Heinzl, A. Amirkhanov, M. Reiter, E. Gröller - Visual Optimality and Stability Analysis of 3DCT Scan Positions - IEEE Transactions on Visualization and Computer Graphics (TVCG), Vol. 16, No. 6, 2010 |
| 2010 | Model-Driven Communication Routing in Industrial Automation and Control Systems A. Schimmel, A. Schimmel, M. Rooker, A. Zoitl, G. Ebenhofer - Model-Driven Communication Routing in Industrial Automation and Control Systems - Proc. of 8th IEEE Conference on Industrial Informatics (INDIN'10), Osaka, Japan, 2010 |
| 2010 | VALU: Video Aided E-Learning and Understanding J. D. Hallewell Haslwanter, F. Daschil, C. Derndorfer, T. Koniarek - VALU: Video Aided E-Learning and Understanding - Tagungsband Internationales Forum Mechatronik 2010, Winterthur, Schweiz, 2010 |
| 2010 | Evaluierung von FlexRay zur Vernetzung industrieller Automatisierungssysteme R. Froschauer - Evaluierung von FlexRay zur Vernetzung industrieller Automatisierungssysteme - Industrielles Symposium Mechatronik 2010, Linz, Österreich, 2010, pp. 5 |
| 2010 | Comportamento de aços ferramenta em tratamentos térmicos de ciclos curtos R. Schneider, R. Mesquita, C. Schüller - Comportamento de aços ferramenta em tratamentos térmicos de ciclos curtos - Proceedings of Encontro da Cadeia de Ferramentas, Moldes e Matrizes - Moldes 2010, Sao Paulo, Sao Paulo, Brasilien, 2010, pp. 160-169 |
| 2010 | in-vivo detection of protein-protein interactions on micro-patterned surfaces J. Weghuber - in-vivo detection of protein-protein interactions on micro-patterned surfaces - Journal of Visualized Experiments, Vol. 3, No. 19, 2010 |
| 2010 | Upscaling of an a-C:H:Si Triplex Process in an Industrial DC PACVD System C. Forsich, D. Heim, T. Müller, A. Gebeshuber - Upscaling of an a-C:H:Si Triplex Process in an Industrial DC PACVD System - 37th International Conference on Metallurgical Coatings and Thin Films, San Diego, Vereinigte Staaten von Amerika, 2010 |
| 2010 | Metal & reticulated vitreous carbon foams as bipolar flow plate material for proton exchange membrane fuel cells J. Carton, A. Olabi, V. Lawlor - Metal & reticulated vitreous carbon foams as bipolar flow plate material for proton exchange membrane fuel cells - SEEP2010, Bari Italy, Italien, 2010, pp. 77-83 |
| 2010 | ROBOT EXPLORATION CONTROLLED BY MODULAR ELECTRONIC SYSTEM WITH COMMUNICATION TO THE 2D-MAPPING R. Edlinger, M. Zauner - ROBOT EXPLORATION CONTROLLED BY MODULAR ELECTRONIC SYSTEM WITH COMMUNICATION TO THE 2D-MAPPING - Österreichische Computer Gesellschaft, Vol. 36, No. 2010, 2010, pp. 7 |
| 2010 | Uncertainty Visualization of Computed Tomography Datasets from Industrial Components C. Heinzl, J. Kastner, E. Gröller - Uncertainty Visualization of Computed Tomography Datasets from Industrial Components - Proc. of 10th European Conference on Non-Destructive Testing, Moskau, Russland, 2010 |
| 2010 | Field Experience with GPS based Train Control System B. Stadlmann, S. Mairhofer, G. Hanis - Field Experience with GPS based Train Control System - Proceedings ENC-GNSS 2010, Braunschweig, Deutschland, 2010, pp. 7 |
| 2010 | Anwendung der Sub-µm CT zur Charakterisierung von Holzwerkstoffen G. Standfest, S. Kranzer, B. Plank, A. Petutschnigg, M. Dunky - Anwendung der Sub-µm CT zur Charakterisierung von Holzwerkstoffen - Proceedings Industrielle Computertomografie Fachtagung 2010, Wels, Österreich, 2010, pp. 65-70 |
| 2010 | Rissfortschritt in Sphärogussproben durch in-situ Zugversuche im Synchrotron-Strahl J. Crespo-Casanova, H. Degischer, C. Ladron, E. Maire, K. Track, B. Harrer - Rissfortschritt in Sphärogussproben durch in-situ Zugversuche im Synchrotron-Strahl - Tagung Werkstoffprüfung 2010, Neu-Ulm, Deutschland, 2010 |
| 2010 | Cholesterol SlOWS down the Lateral Mobility of an Oxidized Phospholipid in a Supported Lipid Bilayer J. Weghuber - Cholesterol SlOWS down the Lateral Mobility of an Oxidized Phospholipid in a Supported Lipid Bilayer - LANGMUIR, Vol. 26, No. 22, 2010 |
| 2010 | Chancen und Potenziale der Bioethanolproduktion aus Stroh A. Jäger, H. Kahr, A. Eder, S. Helmberger, C. Lanzerstorfer - Chancen und Potenziale der Bioethanolproduktion aus Stroh - Proceedings 11. Symposium Energieinnovation, Graz, Österreich, 2010 |
| 2010 | FRONTICS - A Communication Framework for Networked Automation and Control Systems R. Froschauer, A. Zoitl, M. Rooker - FRONTICS - A Communication Framework for Networked Automation and Control Systems - Proc. of the 10th IFAC Workshop on Intelligent Manufacturing Systems, Lisbon, Spanien, 2010 |
| 2010 | Energie sparen durch Simulation M. Jungwirth, W. Baumgartinger, M. Kaltenbacher - Energie sparen durch Simulation in Energieeffiziente Mobilität - Shaker Verlag, 2010, pp. 45-54 |
| 2010 | Study on parameter variation of an industrial computed tomography simulation tool concerning dimensional measurement deviations M. Reiter, C. Heinzl, D. Salaberger, D. Weiss, J. Kastner - Study on parameter variation of an industrial computed tomography simulation tool concerning dimensional measurement deviations - Proc. of 10th European Conference on Non-Destructive Testing, Moskau, Russland, 2010 |
| 2010 | Untersuchung und Evaluierung von Gleichstromunterbrecherprinzipien im Bereich Elektromobilität W. Hauer, P. Zeller - Untersuchung und Evaluierung von Gleichstromunterbrecherprinzipien im Bereich Elektromobilität in Energieeffiziente Mobilität - Shaker Verlag, 2010, pp. 62-71 |
| 2010 | Comparative study of high resolution cone beam X-ray computed tomography methods and discussion of temperature influence on Nanotom stability D. Salaberger, B. Plank, B. Harrer, J. Kastner, O. Brunke, H. Degischer - Comparative study of high resolution cone beam X-ray computed tomography methods and discussion of temperature influence on Nanotom stability - Book of Abstracts: High Resolution X-ray CT Symposium, Dresden, Deutschland, 2010, pp. 37 |
| 2010 | Radial shrinkage and ultrasound acoustic emissions of fresh versus pre-dried Norway spruce sapwood S. Rosner, J. Konnerth, B. Plank, D. Salaberger, C. Hansmann - Radial shrinkage and ultrasound acoustic emissions of fresh versus pre-dried Norway spruce sapwood - TREES-STRUCTURE AND FUNCTION, Vol. 24, No. 5, 2010, pp. 931-940 |
| 2010 | Model-Driven Engineering of Networked Industrial Automation Systems M. Wenger, R. Froschauer, M. Rooker, G. Ebenhofer, A. Zoitl, T. Strasser - Model-Driven Engineering of Networked Industrial Automation Systems - Proc. of 8th IEEE Conference on Industrial Informatics (INDIN'10), Osaka, Japan, 2010 |
| 2010 | Cálirea În Suprafatá A Otelurilor De Prelucrári La Rece-O Alternativá De Treatment Terminc Cu Deformare Minimá Si Economii De Energie? R. Schneider, C. Schüller - Cálirea În Suprafatá A Otelurilor De Prelucrári La Rece-O Alternativá De Treatment Terminc Cu Deformare Minimá Si Economii De Energie? - Proceedings of the International Conference on Reduction Of Energy Consumption In Heat And Thermochemical Treatment Technologies And Installations, Poiana Brasov, Rumänien, 2010, pp. 36-48 |
| 2010 | Industrielle Einsetzbarkeit automatisch generiertem Steuerungscodes aus Matlab/Simulink Modellen am Beispiel eines komplexen Satellitenteststendes F. Auinger, R. Froschauer - Industrielle Einsetzbarkeit automatisch generiertem Steuerungscodes aus Matlab/Simulink Modellen am Beispiel eines komplexen Satellitenteststendes - Industrielles Symposium Mechatronik 2010, Linz, Österreich, 2010, pp. 63-76 |
| 2010 | Surface hardening of cold-work tool steels - an energy saving and low distortion heat treatment alternative? R. Schneider, C. Schüller, R. Grunwald - Surface hardening of cold-work tool steels - an energy saving and low distortion heat treatment alternative? - Proceedings of the International Conference on Reduction Of Energy Consumption In Heat And Thermochemical Treatment Technologies And Installations, Poiana Brasov, Rumänien, 2010, pp. 61-66 |
| 2010 | Direct Observation and Quantitative Analysis of Lck Exchange between Plasma Membrane and Cytosol in Living T Cells J. Weghuber - Direct Observation and Quantitative Analysis of Lck Exchange between Plasma Membrane and Cytosol in Living T Cells - JOURNAL OF BIOLOGICAL CHEMISTRY, Vol. 285, No. 9, 2010 |
| 2010 | Amorphous carbon-silicon-coatings on nitrided and post-oxidized steels deposited by DC-PACVD D. Heim, C. Forsich, C. Übleis, A. Gebeshuber, T. Müller - Amorphous carbon-silicon-coatings on nitrided and post-oxidized steels deposited by DC-PACVD - 1st Austrian Symposium on Carbon Based, Leoben, Österreich, 2010 |
| 2010 | A Modular and Scalable Electronic System for Mobile and Autonomous Robots M. Zauner, R. Edlinger - A Modular and Scalable Electronic System for Mobile and Autonomous Robots in Lecture Notes in Communications in Computer and Information Science (CCIS) - Springer Verlag, 2010, pp. 9 |
| 2010 | The Use of CFD to Investigate the Properties of MT-SOFCs with Various Fuel & Oxidant Manifolding Techniques. V. Lawlor, C. Hochenauer, A. Mariani, S. Griesser, S. Kuehn, K. Klein, A. Olabi, J. Carton, M. Olbrich, S. Cordiner, D. Meissner, G. Buchinger - The Use of CFD to Investigate the Properties of MT-SOFCs with Various Fuel & Oxidant Manifolding Techniques. - SEEP2010, Bari Italy, Italien, 2010, pp. 10 |
| 2010 | Porositätsbestimmung in der Flugzeugindustrie mittels Röntgen-Computertomografie B. Plank, J. Sekelja, G. Mayr, J. Kastner - Porositätsbestimmung in der Flugzeugindustrie mittels Röntgen-Computertomografie - Proceedings Industrielle Computertomografie Fachtagung 2010, Wels, Österreich, 2010, pp. 25-34 |
| 2010 | Structural Analysis of Polymeric Foams by Sub-µm X-RAY Computed Tomogaphy J. Kastner, D. Salaberger, R. Kickinger - Structural Analysis of Polymeric Foams by Sub-µm X-RAY Computed Tomogaphy - Proc. of 10th European Conference on Non-Destructive Testing, Moskau, Russland, 2010 |
| 2010 | Multiphysikalische Simulation eines Kühlsystems mit MATLAB H. Fenzl, A. Eder, M. Jungwirth - Multiphysikalische Simulation eines Kühlsystems mit MATLAB - Industrielles Symposium Mechatronik 2010, Linz, Österreich, 2010, pp. 107 |
| 2010 | In-situ Zugversuche an Sphärogussproben im Synchrotron-Strahl J. Crespo-Casanova, H. Degischer, C. Ladron, E. Maire, K. Track, B. Harrer - In-situ Zugversuche an Sphärogussproben im Synchrotron-Strahl - Industrielle Computertomografie 2010, Wels, Österreich, 2010 |
| 2010 | Resting State Orai1 Diffuses as Homotetramer in the Plasma Membrane of Live Mammalian Cells J. Weghuber - Resting State Orai1 Diffuses as Homotetramer in the Plasma Membrane of Live Mammalian Cells - JOURNAL OF BIOLOGICAL CHEMISTRY, Vol. 285, No. 52, 2010 |
| 2010 | Konzept zum Einsatz von Stroh in Biogasanlagen C. Lanzerstorfer, A. Jäger, A. Eder - Konzept zum Einsatz von Stroh in Biogasanlagen - Proceedings Fachhochschulkonferenz 2010, Pinkafeld, Österreich, 2010, pp. 271-276 |
| 2010 | Biogas Production and Its Use as Local “(Bio-)gas Fuel Station A. Jäger, A. Eder, H. Kahr, P. Lanzerstorfer - Biogas Production and Its Use as Local “(Bio-)gas Fuel Station in Energieeffiziente Mobilität - Shaker Verlag, 2010, pp. 25-35 |
| 2009 | Micro-tubular SOFC: Towards a power pack for automotive and auxiliary power supply use V. Lawlor, G. Zauner, A. Mariani, C. Hochenauer, J. Carton, S. Griesser, K. Klein, S. Kuehn, D. Meissner, A. Olabi, S. Cordiner, G. Buchinger - Micro-tubular SOFC: Towards a power pack for automotive and auxiliary power supply use - Elevent Grove Fuel Cell Symposiun, London, Vereinigtes Königreich von Großbritannien und Nordirland, 2009, pp. 1 |
| 2009 | Computation and Visualization of Fabrication Artifacts M. M. Malik, C. Heinzl, E. Gröller - Computation and Visualization of Fabrication Artifacts - Journal of WSCG, Vol. 17, No. 1, 2009, pp. 17-24 |
| 2009 | Microstructural Changes During Short-Cycle Heat Tratments of Cold-Work Tool Steels R. Schneider, R. Grunwald, C. Schüller - Microstructural Changes During Short-Cycle Heat Tratments of Cold-Work Tool Steels - New challenges in Heat Treatment and Surface Hardening, Dubrovnik, Kroatien, 2009 |
| 2009 | Bildsegmentierung mittels Multiresolution-Bildverarbeitung zur Detektion von Graphiteinschlüssen in 3D-Computertomographie Aufnahmen G. Zauner, B. Harrer - Bildsegmentierung mittels Multiresolution-Bildverarbeitung zur Detektion von Graphiteinschlüssen in 3D-Computertomographie Aufnahmen - Tagungsband des 3. Forschungsforums der österreichischen Fachhochschulen, Fachhochschule Kärnten, Villach, Österreich, 2009, pp. 5 |
| 2009 | Evaluation of Different Methods to Compute Excitation Signals Based on Measured Targets in Agricultural Machines S. Reichl, W. Steiner, M. Steinbatz, M. Hofer - Evaluation of Different Methods to Compute Excitation Signals Based on Measured Targets in Agricultural Machines - PAMM Vol. 9, Danzig, Polen, 2009, pp. 2 |
| 2009 | RoboCup Rescue 2009 - Robot League Team R. Edlinger, A. Poelzleithner, W. Rokitansky, M. Zauner, B. Fahringer, J. Hieslmair, T. Fink, T. Hatheier, H. Kneidinger - RoboCup Rescue 2009 - Robot League Team - Technical Report, FH OÖ Fakultät Wels, Österreich, 2009, pp. 14 |
| 2009 | A STUDY TO INVESTIGATE METHODS TO MEASURE THE TEMPERATURE OF A MT-SOFC IN A HIGH TEMPERATURE WIND TUNNEL. V. Lawlor, G. Zauner, A. Mariani, C. Hochenauer, S. Griesser, J. Carton, S. Kuehn, K. Klein, D. Meissner, A. Olabi, S. Cordiner, G. Buchinger - A STUDY TO INVESTIGATE METHODS TO MEASURE THE TEMPERATURE OF A MT-SOFC IN A HIGH TEMPERATURE WIND TUNNEL. - Third European Fuel Cell Technology and Applications Conference - Piero Lunghi Conference, Rome Italy, Italien, 2009, pp. 2 |
| 2009 | Genauigkeitsoptimierung der Röntgen-Computertomographie für die Geometriebestimmung und Visualisierung der Messunsicherheit J. Kastner, C. Heinzl - Genauigkeitsoptimierung der Röntgen-Computertomographie für die Geometriebestimmung und Visualisierung der Messunsicherheit - DGZfP-Berichtsband BB 115 - CD, Münster, Deutschland, 2009, pp. 8 |
| 2009 | Review of the micro-tubular solid oxide fuel cell (part I: Stack design issues and research activities) V. Lawlor, S. Griesser, G. Buchinger, A. Olabi, S. Cordiner, D. Meissner - Review of the micro-tubular solid oxide fuel cell (part I: Stack design issues and research activities) - Journal of Power Sources, Vol. 153, No. 2, 2009, pp. 387-399 |
| 2009 | Micro-tubular SOFCs to Measure the Effects of Cross Flow on Mass Transfer Rates Around the Perimeter of a Cylindrical Electrode V. Lawlor, D. Meissner, C. Hochenauer, S. Griesser, S. Cordiner, A. Mariani, G. Zauner, A. Olabi, G. Buchinger - Micro-tubular SOFCs to Measure the Effects of Cross Flow on Mass Transfer Rates Around the Perimeter of a Cylindrical Electrode - ECS Transactions, Vol. 25, No. 2, 2009, pp. 1283-1293 |
| 2009 | Development and Adaptation of IEC 61499 Automation and Control Systems with Runtime Variability Models R. Froschauer, A. Zoitl, P. Grünbacher - Development and Adaptation of IEC 61499 Automation and Control Systems with Runtime Variability Models - Proceedings of 7th International IEEE Conference on Industrial Informatics 2009, Cardiff (UK), Vereinigtes Königreich von Großbritannien und Nordirland, 2009, pp. 6 |
| 2009 | Comparative defect evaluation of aircraft components by active thermography G. Zauner, G. Mayr, G. Hendorfer - Comparative defect evaluation of aircraft components by active thermography - Proceedings of SPIE Machine Vision Applications Volume 7251, San Jose / USA, Vereinigte Staaten von Amerika, 2009, pp. 8 |
| 2009 | Improvement of X-Ray image acquisition using a GPU based 3DCT simulation tool M. Reiter, M. M. Malik, C. Heinzl, D. Salaberger, E. Gröller, H. Lettenbauer, J. Kastner - Improvement of X-Ray image acquisition using a GPU based 3DCT simulation tool - Proccedings of 8th International Conference for Quality Control by Artificial Vision, Wels, Österreich, 2009 |
| 2009 | Entwicklung eines autonom agierenden Roboters für den Katastropheneinsatz R. Edlinger, A. Poelzleithner - Entwicklung eines autonom agierenden Roboters für den Katastropheneinsatz - Tagungsband des 3. Forschungsforums der österreichischen Fachhochschulen, Fachhochschule Kärnten, Villach, Österreich, 2009, pp. 217-222 |
| 2009 | Ermittlung der Reibungsdaten von Kunststoffschüttgütern zur Simulation des Förderverhaltens von Einschneckenplastifiziereinheiten C. Kneidinger, G. Zitzenbacher - Ermittlung der Reibungsdaten von Kunststoffschüttgütern zur Simulation des Förderverhaltens von Einschneckenplastifiziereinheiten - Internationales Forum Mechatronik 2009, Linz, Österreich, 2009, pp. 5 |
| 2009 | INVESTIGATION OF THE SUITABILITY OF UNUSED TANKS C. Hochenauer, V. Lawlor, E. Spiegl, B. Linimayr - INVESTIGATION OF THE SUITABILITY OF UNUSED TANKS - Proceedings of SEEP 2009, Dublin, Irland, 2009 |
| 2009 | Computertomographie von Multimaterialbauteilen und Auswertung mittels statistischer Analyse C. Heinzl, J. Kastner, E. Gröller - Computertomographie von Multimaterialbauteilen und Auswertung mittels statistischer Analyse - Proceedings FFH 2009, Villach, Österreich, 2009, pp. 8 |
| 2009 | Towards an optamised Micro-tubular SOFC reactor core design. V. Lawlor, C. Hochenauer, G. Zauner, S. Griesser, A. Olabi, D. Meissner, G. Buchinger - Towards an optamised Micro-tubular SOFC reactor core design. - Tagungsband des 3. Forschungsforums der österreichischen Fachhochschulen, Fachhochschule Kärnten, Villach, Österreich, 2009, pp. 288-293 |
| 2009 | A MICRO TUBULAR SOFC AND STACK TESTING APPERATUS: TO PROVIDE A MEANS OF DEVELOPING HIGHLY EFFICIENT PORTABLE AND AUXILARY POWER PACKS FOR THE FUTURE V. Lawlor, A. Mariani, C. Hochenauer, G. Zauner, S. Griesser, D. Meissner, A. Olabi, S. Cordiner, G. Buchinger - A MICRO TUBULAR SOFC AND STACK TESTING APPERATUS: TO PROVIDE A MEANS OF DEVELOPING HIGHLY EFFICIENT PORTABLE AND AUXILARY POWER PACKS FOR THE FUTURE - Proceedings of SEEP 2009, Dublin, Irland, 2009, pp. 2-7 |
| 2009 | Engineering of Communication Links with AADL in IEC 61499 Automation and Control Systems R. Froschauer, A. Schimmel, F. Auinger, A. Zoitl - Engineering of Communication Links with AADL in IEC 61499 Automation and Control Systems - Proceedings of 7th International IEEE Conference on Industrial Informatics 2009, Cardiff (UK), Vereinigtes Königreich von Großbritannien und Nordirland, 2009, pp. 6 |
| 2009 | Wavelet based subsurface defect characterization in pulsed phase thermography for non-destructive evaluation G. Zauner, G. Mayr, G. Hendorfer - Wavelet based subsurface defect characterization in pulsed phase thermography for non-destructive evaluation - Proceedings of SPIE - Wavelet Applications Volume 7248, San Jose / USA, Vereinigte Staaten von Amerika, 2009, pp. 8 |
| 2009 | Cell-to-cell variability in the diffusion constants of the plasma membrane proteins CD59 and CD147 J. Weghuber - Cell-to-cell variability in the diffusion constants of the plasma membrane proteins CD59 and CD147 - Soft Matter, Vol. 5, No. 17, 2009 |
| 2009 | Adhesion and Homogeneity of a-C:H:Si Films Deposited in a Modified Plasma Nitriding System for Industrial Application C. Forsich, D. Heim, T. Müller - Adhesion and Homogeneity of a-C:H:Si Films Deposited in a Modified Plasma Nitriding System for Industrial Application - 36th International Conference on Metallurgical Coatings and Thin Films 2009, San Diego, Vereinigte Staaten von Amerika, 2009 |
| 2009 | Bioethanol aus Stroh, Beitrag zum Klimaschutz A. Jäger, C. Lanzerstorfer, A. Eder - Bioethanol aus Stroh, Beitrag zum Klimaschutz - 3. Forschungsforum der Österreichischen Fachhochschulen, Villach, Österreich, 2009, pp. 282-287 |
| 2009 | Analyse und Visualisierung von industriellen CT Daten C. Heinzl - Analyse und Visualisierung von industriellen CT Daten - Phd Thesis, Technische Universität Wien, Institut für Computergraphik und Algorithmen, Österreich, 2009, pp. 110 |
| 2009 | Praktische Ansätze zur inversen Berechnung von Drivesignalen für Landmaschinen auf dem virtuellen Prüfstand S. Reichl, W. Steiner, M. Steinbatz, M. Hofer - Praktische Ansätze zur inversen Berechnung von Drivesignalen für Landmaschinen auf dem virtuellen Prüfstand - Internationales Forum Mechatronik 2009, Linz, Österreich, 2009, pp. 55-65 |
| 2009 | Porosity determination in CFRP by means of pulsed thermography combined with effective thermal diffusivity models G. Mayr, G. Hendorfer, B. Plank, J. Sekelja - Porosity determination in CFRP by means of pulsed thermography combined with effective thermal diffusivity models - American Institute of Physics Conference Proceedings, Kingston, Vereinigte Staaten von Amerika, 2009, pp. 8 |
| 2009 | Charakterisierung von Porositäten in Sintermetallen mit 3D-Röntgencomputertomografie - Anwendungsbeispiel selektives Lasersintern B. Plank, J. Kastner, R. Schneider, R. Busch - Charakterisierung von Porositäten in Sintermetallen mit 3D-Röntgencomputertomografie - Anwendungsbeispiel selektives Lasersintern - DGZfP-Berichtsband BB 115 - CD, Münster, Deutschland, 2009, pp. 810-816 |
| 2009 | Reply to "Uncoupling diffusion and binding in FRAP experiments" J. Weghuber - Reply to "Uncoupling diffusion and binding in FRAP experiments" - Nature Methods, Vol. 6, No. 3, 2009 |
| 2009 | Detektierbarkeit von Heterogenitäten in Fe - Basis - und Aluminiumlegierungen mittels Röntgen - Computertomographie B. Harrer - Detektierbarkeit von Heterogenitäten in Fe - Basis - und Aluminiumlegierungen mittels Röntgen - Computertomographie - Phd Thesis, Technische Universität Wien, Inst. f. Werkstoffwissenschaft u. Werkstofftechnologie, Österreich, 2009, pp. 1-229 |
| 2009 | Application of Statistical Analysis for Uncertainty Visualization of Computed Tomography Data from Multi Material Components C. Heinzl, J. Kastner, E. Gröller - Application of Statistical Analysis for Uncertainty Visualization of Computed Tomography Data from Multi Material Components - Denver X-Ray Conference 2009, Denver, Vereinigte Staaten von Amerika, 2009, pp. 8 |
| 2009 | Einsatz einer SBRIO zur Steuerung eines Rescue-Roboters R. Edlinger - Einsatz einer SBRIO zur Steuerung eines Rescue-Roboters - Virtuelle Instrumente in der Praxis, Fürstenfeldbruck/Germany, Deutschland, 2009, pp. 7 |
| 2009 | Practical Approaches for Inverse Calculations of Drive Signals in a Virtual Test Rig with Regard to Agricultural Machines S. Reichl, W. Steiner, M. Steinbatz, M. Hofer - Practical Approaches for Inverse Calculations of Drive Signals in a Virtual Test Rig with Regard to Agricultural Machines - ECCOMAS: European Community on Computational Methods in Applied Sciences, Warschau, Polen, 2009, pp. 8 |
| 2009 | Simulation Based Design of Powersupply Systems M. Jungwirth, D. Hofinger - Simulation Based Design of Powersupply Systems - Proceedings of International Conference Computer Aided Systems Theory EUROCAST 2009, Las Palmas, Spanien, 2009, pp. 161-163 |
| 2009 | Biogas aus vorbehandeltem Stroh C. Lanzerstorfer, A. Jäger, A. Eder - Biogas aus vorbehandeltem Stroh - biogas 09, Wels, Österreich, 2009, pp. 51-58 |
| 2009 | Coefficient of Friction between Bulk Polymers and Different Metal Surfaces at High Pressures C. Kneidinger, G. Zitzenbacher, A. Kögler - Coefficient of Friction between Bulk Polymers and Different Metal Surfaces at High Pressures - Proceedings of Europes and Africas Regional Meeting 2009, Polymer Processing Society (PPS), Larnaca, Zypern, 2009, pp. 4 |
| 2009 | A Root-Expressed Magnesium Transporter of the MRS2/MGT Gene Family in Arabidopsis thaliana Allows for Growth in Low-Mg2+ Environments J. Weghuber - A Root-Expressed Magnesium Transporter of the MRS2/MGT Gene Family in Arabidopsis thaliana Allows for Growth in Low-Mg2+ Environments - PLANT CELL, Vol. 21, No. 12, 2009 |
| 2009 | Measuring the Frictional Behaviour of Polymer Bulk Solids on Screw Surfaces with a New Developed Test Apparatus G. Zitzenbacher, C. Kneidinger, A. Kögler, H. Hager - Measuring the Frictional Behaviour of Polymer Bulk Solids on Screw Surfaces with a New Developed Test Apparatus - Advances in Polymer Science and Technology 1, Linz, Österreich, 2009, pp. 85 |
| 2008 | High Dynamic Range Imaging for Contrast Enhancement of X-ray Images C. Heinzl, J. Kastner, E. Gröller - High Dynamic Range Imaging for Contrast Enhancement of X-ray Images - Proceedings of IEEE Workshop on X-Ray Micro Imaging of Materials, Devices, and Organisms, Dresden, Deutschland, 2008, pp. 8 |
| 2008 | Tribological Behavior of Amorphous Carbon-Silicon-Coatings on Nitrided and Post-Oxidized Steels Deposited by DC-PACVD D. Heim, C. Forsich, T. Müller - Tribological Behavior of Amorphous Carbon-Silicon-Coatings on Nitrided and Post-Oxidized Steels Deposited by DC-PACVD - 11th International Conference on Plasma Surface Engineering, Garmisch-Partenkirchen, Deutschland, 2008 |
| 2008 | Managing the Life-cycle of Industrial Automation Systems with Product Line Variability Models R. Froschauer, D. Dhungana, P. Grünbacher - Managing the Life-cycle of Industrial Automation Systems with Product Line Variability Models - Proceedings of the 34th EUROMICRO Conference on Software Engineering and Advanced Applications, Parma, Italien, 2008, pp. 8 |
| 2008 | Pipeline zur dreidimensionalen Auswertung und Visualisierung der Faserverteilung in glasfaserverstärkten Kunststoffteilen aus µ-Röntgen-Computertomografiedaten J. Kastner, F. Pfeifer, C. Heinzl, R. Freytag - Pipeline zur dreidimensionalen Auswertung und Visualisierung der Faserverteilung in glasfaserverstärkten Kunststoffteilen aus µ-Röntgen-Computertomografiedaten - DACH Jahrestagung 2008 DGZFP , St. Gallen, Schweiz, 2008, pp. 8 |
| 2008 | Kombination von Biogasanlage und Bioethanolanlage C. Lanzerstorfer, A. Jäger, A. Eder - Kombination von Biogasanlage und Bioethanolanlage - biogas 08, Graz, Österreich, 2008, pp. 68-77 |
| 2008 | Anwendung der Computertomographie auf Komponenten der Kernfusionstechnik H. Traxler, B. Harrer, T. Friedrich, B. Schedler, J. Kastner - Anwendung der Computertomographie auf Komponenten der Kernfusionstechnik - Proceedings Industrielle Computertomografie Fachtagung 2008, Wels, Österreich, 2008, pp. 29-36 |
| 2008 | Influence of the Deposition Temperature on Mechanical and Tribological Properties of a-C:H:Si Coatings on Nitrided and Postoxidized Steel Deposited by DC-PACVD, Surface and Coatings Technology C. Forsich, D. Heim, T. Müller - Influence of the Deposition Temperature on Mechanical and Tribological Properties of a-C:H:Si Coatings on Nitrided and Postoxidized Steel Deposited by DC-PACVD, Surface and Coatings Technology - 35th International Conference on Metallurgical Coatings and Thin Films 2008, San Diego, Vereinigte Staaten von Amerika, 2008, pp. 1 |
| 2008 | Geometriebestimmung von Multimaterialbauteilen und reproduzierbare Oberflächenextraktion C. Heinzl, J. Kastner, E. Gröller - Geometriebestimmung von Multimaterialbauteilen und reproduzierbare Oberflächenextraktion - Proceedings Industrielle Computertomografie Fachtagung 2008, Wels, Österreich, 2008, pp. 151-156 |
| 2008 | Micropatterning for quantitative analysis of protein-protein interactions in living cells J. Weghuber - Micropatterning for quantitative analysis of protein-protein interactions in living cells - Nature Methods, Vol. 5, No. 12, 2008 |
| 2008 | Opportunities in the Detection of Inhomogeneities in Steel by Computed Tomography B. Harrer, J. Kastner, W. Winkler, H. Degischer - Opportunities in the Detection of Inhomogeneities in Steel by Computed Tomography - The 17th World Conference on Non-destructive Testing and Exhibition, Shanghai, China, 2008, pp. 7 |
| 2008 | Development Of A High Temperature Wind Tunnel And Numerical Simulations To Optimise The Layout Of A SOFC Micro-Tube Reactor V. Lawlor, G. Buchinger, C. Hochenauer, S. Griesser, A. Olabi, D. Meissner - Development Of A High Temperature Wind Tunnel And Numerical Simulations To Optimise The Layout Of A SOFC Micro-Tube Reactor - Proceedings of AGMET 2008: energy and the Irish climate; harnessing the Irish climate for energy, Dublin, Irland, 2008, pp. 24 |
| 2008 | Possibilities of a decentralized Bioethanol production A. Jäger, C. Lanzerstorfer, A. Eder, S. Fahrnik - Possibilities of a decentralized Bioethanol production - Proceedings Central European Biomass Conference 2008, Graz, Österreich, 2008, pp. 141 |
| 2008 | Intelligentes Fassadensystem mit Glaslamellen H. C. Leindecker, D. Neyer - Intelligentes Fassadensystem mit Glaslamellen - e-nova 2008, Pinkafeld, Österreich, 2008, pp. 49-57 |
| 2008 | Deformation of continuously cast Carbon Steels in the Range of γ-α Transformation M. Hochegger, J. Six, H. Degischer, S. Ilie, B. Harrer - Deformation of continuously cast Carbon Steels in the Range of γ-α Transformation - Thermomechanical Processing of Steel, Padua, Italien, 2008, pp. 10 |
| 2008 | Eigenschaften und Anwendungen von Si-hältigen Kohlenstoffschichten C. Forsich, D. Heim, T. Müller - Eigenschaften und Anwendungen von Si-hältigen Kohlenstoffschichten - Welser Werkstoff-Kolloquium 2008, Wels, Österreich, 2008, pp. 8 |
| 2008 | Schnelle und zerstörungsfreie Werkstoffprüfung bei Metallen durch Anwendung der Induktionsthermographie G. Mayr, G. Hendorfer, F. Puchberger, B. Harrer, B. Dietermayr - Schnelle und zerstörungsfreie Werkstoffprüfung bei Metallen durch Anwendung der Induktionsthermographie - Tagungsband des 2. Forschungsforums der österreichischen Fachhochschulen, Wels, Österreich, 2008, pp. 347-353 |
| 2008 | Röntgen-Computertomographie zur Quantifizierung von Porenstrukturen in Sintereisen B. Harrer, C. Gierl, H. Danninger, R. Schneider, J. Kastner - Röntgen-Computertomographie zur Quantifizierung von Porenstrukturen in Sintereisen - Welser Werkstoff-Kolloquium 2008, Wels, Österreich, 2008, pp. 27-32 |
| 2008 | Multiskalare Tomografie von Diamant verstärkten Metallmatrix Verbundwerkstoffen für Kühlungszwecke M. Schöbel, B. Harrer, H. Degischer - Multiskalare Tomografie von Diamant verstärkten Metallmatrix Verbundwerkstoffen für Kühlungszwecke - Praktische Metallografie, Jena, Deutschland, 2008, pp. 337-342 |
| 2008 | Towards a micro-tubular SOFC reactor with C.F.D, validation, experiments and a high temperature wind tunnel. V. Lawlor, C. Hochenauer, G. Buchinger, S. Griesser, A. Olabi, D. Meissner - Towards a micro-tubular SOFC reactor with C.F.D, validation, experiments and a high temperature wind tunnel. - Proceedings of the 11th annual Sir Bernard Crossland Symposium, Limerick, Irland, 2008, pp. 157 |
| 2008 | Influence and effects of gas flow on the deposition of SiOCN films in an industrial scale DC glow discharge plasma system T. Müller, A. Gebeshuber, D. Heim, C. Forsich - Influence and effects of gas flow on the deposition of SiOCN films in an industrial scale DC glow discharge plasma system - Asian-European International Conference on Plasma Surface Engineering 2008, München, Deutschland, 2008, pp. 1 |
| 2008 | Influence of the deposition temperature on mechanical and tribological properties of a-C:H:Si coatings on nitrided and postoxidized steel deposited by DC-PACVD C. Forsich, D. Heim, T. Müller - Influence of the deposition temperature on mechanical and tribological properties of a-C:H:Si coatings on nitrided and postoxidized steel deposited by DC-PACVD - SURFACE & COATINGS TECHNOLOGY, Vol. 203, No. 203, 2008, pp. 521-525 |
| 2008 | Friction of Polymer Pellets at Screw Surfaces C. Kneidinger, G. Zitzenbacher, H. Hager - Friction of Polymer Pellets at Screw Surfaces - Proceedings of Americas Regional Meeting, Polymer Processing Society (PPS), Charleston, Vereinigte Staaten von Amerika, 2008, pp. 1-2 |
| 2008 | Bioethanolproduktion an Biogasanlagenstandorten A. Jäger, C. Lanzerstorfer, A. Eder - Bioethanolproduktion an Biogasanlagenstandorten - Proceedings FH Science Day 2008, Linz, Österreich, 2008, pp. 83-86 |
| 2008 | Fatigue Analysis of a Reconstructed Femur. Effects of Prosthetic Materials S. Reichl, W. Steiner, R. Mootanah - Fatigue Analysis of a Reconstructed Femur. Effects of Prosthetic Materials - Proceeding of the 8th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Sheraton Hotel and SPA, Porto, Portugal, Portugal, 2008, pp. 6 |
| 2008 | PACVD zur Abscheidung Si-hältiger Kohlenstoffschichten C. Forsich, D. Heim, D. Müller - PACVD zur Abscheidung Si-hältiger Kohlenstoffschichten - Proceedings FH Science Day 2008, Linz, Österreich, 2008 |
| 2008 | Charakterisierung von Porositäten in Sintermetallen mit 3D-Röntgencomputertomographie zur Ermittlung optimaler Fertigungsparameter beim selektiven Laserschmelzen B. Plank - Charakterisierung von Porositäten in Sintermetallen mit 3D-Röntgencomputertomographie zur Ermittlung optimaler Fertigungsparameter beim selektiven Laserschmelzen - Master/Diploma Thesis, FH OÖ Fakultät Wels, Österreich, 2008, pp. 161 |
| 2008 | Pulsed Thermography of CFC Monoblock Divertor Components H. Traxler, S. Gerzoskovitz, L. Sigl, B. Harrer, J. Kastner - Pulsed Thermography of CFC Monoblock Divertor Components - 25th Symposion on Fusion Technology -SOFT 2008, Rostock, Deutschland, 2008, pp. 8 |
| 2008 | Numerical Simulation and Experimental Validation to Design an Optimised Micro-Tubular Solid Oxide Fuel Cell Reactor. V. Lawlor, C. Hochenauer, G. Buchinger, S. Griesser, A. Olabi, D. Meissner - Numerical Simulation and Experimental Validation to Design an Optimised Micro-Tubular Solid Oxide Fuel Cell Reactor. - Tagungsband 2. Forschungsforum der österreichischen Fachhochschulen, Wels, Österreich, 2008, pp. 327-334 |
| 2008 | Influence of Pre-Treatment and Roughness on Tribological Properties of a-C:H:Si Coatings Deposited on Nitrided and Postoxidized Steel by Means of DC-PACVD C. Forsich, D. Heim, T. Müller - Influence of Pre-Treatment and Roughness on Tribological Properties of a-C:H:Si Coatings Deposited on Nitrided and Postoxidized Steel by Means of DC-PACVD - 12th Joint Vacuum Conference, Balaton, Ungarn, 2008 |
| 2008 | Runtime Adaptation of IEC 61499 Applications Using Domain-specific Variability Models R. Froschauer, D. Dhungana, P. Grünbacher - Runtime Adaptation of IEC 61499 Applications Using Domain-specific Variability Models - Proceedings of the 2nd International Workshop on Dynamic Software Product Lines (DSPL 2008), Limerick, Irland, 2008, pp. 6 |
| 2008 | Different Types of Cell-to-Cell Connections Mediated by Nanotubular Structures J. Weghuber - Different Types of Cell-to-Cell Connections Mediated by Nanotubular Structures - BIOPHYSICAL JOURNAL, Vol. 95, No. 9, 2008 |
| 2008 | Statistical analysis of Multi-Material Components using Dual Energy CT C. Heinzl, J. Kastner, T. Möller, E. Gröller - Statistical analysis of Multi-Material Components using Dual Energy CT - Proceedings of Vision, Modeling, and Visualization 2008, Konstanz, Germany, Deutschland, 2008, pp. 10 |
| 2008 | Extrusion of Chalk-filled PE-LLD-Regranulate Blown Films by Applying Different Processing Methods G. Zitzenbacher, W. Stadlbauer, W. Schubert, P. Reven, J. Pühringer - Extrusion of Chalk-filled PE-LLD-Regranulate Blown Films by Applying Different Processing Methods - Proceedings of PPS-24, Salerno, Italien, 2008, pp. 4 |
| 2008 | Röntgen-Computertomographie zur Charakterisierung von Heterogenitäten in Eisenwerkstoffen B. Harrer, B. Plank, D. Moore, J. Kastner, H. Degischer - Röntgen-Computertomographie zur Charakterisierung von Heterogenitäten in Eisenwerkstoffen - Proceedings Industrielle Computertomografie Fachtagung 2008, Wels, Österreich, 2008, pp. 89-95 |
| 2007 | Behaglichkeitsanalysen von Gebäuden durch die Kombination von thermischer Gebäudesimulation & CFD H. C. Leindecker, D. Neyer - Behaglichkeitsanalysen von Gebäuden durch die Kombination von thermischer Gebäudesimulation & CFD - Forschungsforum der österreichischen Fachhochschulen, Puch, Österreich, 2007, pp. 269-274 |
| 2007 | Multiphysics Modelling of High-Frequency Inductive Devices M. Jungwirth, D. Hofinger - Multiphysics Modelling of High-Frequency Inductive Devices - Proceedings COMSOL Konferenz 2007, Grenoble, Frankreich, 2007, pp. 229-234 |
| 2007 | Mrs2p forms a high conductance Mg2+ selective channel in mitochondria J. Weghuber - Mrs2p forms a high conductance Mg2+ selective channel in mitochondria - BIOPHYSICAL JOURNAL, Vol. 93, No. 11, 2007 |
| 2007 | Design of a Micro-Tubular SOFC Rector with CFD and Validations V. Lawlor, G. Buchinger, C. Hochenauer, P. Dawson, T. Raab, S. Griesser, A. Olabi, B. Corcoran, D. Meissner - Design of a Micro-Tubular SOFC Rector with CFD and Validations - Proceedings ot the 2nd European Fuel Cell Technology and Applications Conference, Rom, Italien, 2007, pp. 1 |
| 2007 | Angewandte Simulation für Aktive Invertertechnologie D. Hofinger, M. Jungwirth - Angewandte Simulation für Aktive Invertertechnologie - Proceedings FH Science Day 2007, Wels, Österreich, 2007, pp. 51-58 |
| 2007 | Modelling Real-time Constraints Regarding Reconfiguration Aspects for IEC 61499 Control Applications G. Grabmair, A. Zoitl, T. Strasser, R. Froschauer - Modelling Real-time Constraints Regarding Reconfiguration Aspects for IEC 61499 Control Applications - INDIN 2007 Conference Proceedings Vol. 2, Wien, Österreich, 2007, pp. 1135-1140 |
| 2007 | Comparison of surface detection methods to evaluate cone-beam computed tomography data for three dimensional metrology C. Heinzl, J. Kastner, B. Georgi, H. Lettenbauer - Comparison of surface detection methods to evaluate cone-beam computed tomography data for three dimensional metrology - Proceedings of International Symposium on Digital industrial Radiology and Computed Tomography 2007, Lyon, Frankreich, 2007, pp. 8 |
| 2007 | Improving the Power Densities and Lifetime of Micro-Tubular SOFCs G. Buchinger, T. Raab, S. Griesser, V. Lawlor, S. Potzmann, S. Kuehn, K. Klein, W. Sitte, D. Meissner - Improving the Power Densities and Lifetime of Micro-Tubular SOFCs - Proceedings ot the 2nd European Fuel Cell Technology and Applications Conference, Rom, Italien, 2007, pp. 1 |
| 2007 | Fatigue Analysis of a Reconstructed Femur. Effects of Prosthetic Materials S. Reichl - Fatigue Analysis of a Reconstructed Femur. Effects of Prosthetic Materials - Master/Diploma Thesis, FH OÖ Fakultät Wels, Österreich, 2007, pp. 145 |
| 2007 | Röntgen-Computertomographie zur Charakterisierung von Inhomogenitäten in Gussgefügen von Aluminium und Stahl B. Harrer, W. Winkler, E. Pissenberger, J. Kastner, H. Degischer - Röntgen-Computertomographie zur Charakterisierung von Inhomogenitäten in Gussgefügen von Aluminium und Stahl - Fortschritte in der Metallographie, Bremen, Deutschland, 2007, pp. 131-136 |
| 2007 | Benchmark Tests of Single-Break and Double-Break Design Principles W. Hauer, P. Zeller, X. Zhou - Benchmark Tests of Single-Break and Double-Break Design Principles - Proceeding of the 53rd IEEE Holm conference on electrical contacts, Pittsburgh, PA, Vereinigte Staaten von Amerika, 2007, pp. 48-55 |
| 2007 | Surface Extraction from Multi-Material Components for Metrology using Dual Energy CT C. Heinzl, J. Kastner, E. Gröller - Surface Extraction from Multi-Material Components for Metrology using Dual Energy CT - IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS, Vol. 13, No. 6, 2007, pp. 1520-1528 |
| 2007 | Stability of micro tubular SOFCs operated with synthetic wood gases and wood gas components G. Buchinger, P. Hinterreiter, T. Raab, S. Griesser, V. Lawlor, K. Klein, S. Kuehn, W. Sitte, D. Meissner - Stability of micro tubular SOFCs operated with synthetic wood gases and wood gas components - Proceedings: 2007 International Conference on Clean Electrical Power, Capri, Italien, 2007, pp. 444-449 |
| 2007 | Konzeption und Realisierung mobiler und autonomer Roboter R. Edlinger - Konzeption und Realisierung mobiler und autonomer Roboter - Master/Diploma Thesis, FH OÖ Fakultät Wels, Österreich, 2007, pp. 134 |
| 2007 | Charakterisierung von Inhomogenitäten in metallischen Gusswerkstoffen mittels 3D-Röntgen-Computertomographie B. Harrer, J. Kastner, A. Kottar, H. Degischer - Charakterisierung von Inhomogenitäten in metallischen Gusswerkstoffen mittels 3D-Röntgen-Computertomographie - DGZFP Jahrestagung 2007, Fürth, Deutschland, 2007, pp. 10 |
| 2007 | Deposition of SiOCN and Si-C:H Films in an Industrial Pulsed dc PACVD System C. Forsich, D. Heim - Deposition of SiOCN and Si-C:H Films in an Industrial Pulsed dc PACVD System - 34th International Conference on Metallurgical Coatings and Thin Films 2007, San Diego, Vereinigte Staaten von Amerika, 2007, pp. 1 |
| 2007 | Messung von Mikrobauteilen und reproduzierbare Oberflächenextraktion J. Kastner, D. Salaberger, C. Heinzl - Messung von Mikrobauteilen und reproduzierbare Oberflächenextraktion - PTB-Bericht Geometriebestimmung mit industrieller Computertomografie, Braunschweig, Deutschland, 2007, pp. 181-192 |
| 2007 | Operating micro-tubular SOFCs containing nickel based anodes with blends of methane and hydrogen G. Buchinger, J. Kraut, T. Raab, S. Griesser, V. Lawlor, J. Haiber, R. Hiesgen, W. Sitte, D. Meissner - Operating micro-tubular SOFCs containing nickel based anodes with blends of methane and hydrogen - Proceedings: 2007 International Conference on Clean Electrical Power, Capri, Italien, 2007, pp. 450-455 |
| 2007 | Entwicklung von mikrotubulären SOFCs G. Buchinger, S. Potzmann, T. Raab, S. Griesser, V. Lawlor, S. Kuehn, K. Klein, D. Meissner - Entwicklung von mikrotubulären SOFCs - Tagungsband des ersten Forschungsforum der österreichischen Fachhochschulen, Fachhochschule Salzburg, Campus Urstein, Österreich, 2007, pp. 1 |
| 2006 | Silica coatings on steel substrates deposited by bipolar pulsed DC PACVD C. Forsich, D. Heim, T. Müller - Silica coatings on steel substrates deposited by bipolar pulsed DC PACVD - Tenth International Conference on Plasma Surface Engineering , Braunschweig, Deutschland, 2006, pp. 1 |
| 2006 | Robust surface detection for variance comparison C. Heinzl, R. Klingesberger, E. Gröller, J. Kastner - Robust surface detection for variance comparison - Proceedings of Eurographics/IEEE VGTC Symposium on Visualisation, Lissabon, Portugal, 2006, pp. 75-82 |
| 2006 | Automatic control application recovery in distributed IEC 61499 based automation and control systems R. Froschauer, F. Auinger, T. Strasser, G. Grabmair - Automatic control application recovery in distributed IEC 61499 based automation and control systems - Proceedings of the IEEE Workshop on Distributed Intelligent Systems: Collective Intelligence and Its Applications (DIS'06), Prague, Tschechische Republik, 2006, pp. 103-108 |
| 2006 | CCD-Kamera basiertes Nahinfrarot-Wärmebildsystem zur Prozesskontrolle in der Plasma-Wärmebehandlung G. Zauner, G. Hendorfer - CCD-Kamera basiertes Nahinfrarot-Wärmebildsystem zur Prozesskontrolle in der Plasma-Wärmebehandlung - Optosensorik in der industriellen Anwendung, Regensburg, Deutschland, 2006, pp. 5 |
| 2006 | Mutational analysis of functional domains in Mrs2p, the mitochondrial Mg2+ channel protein of Saccharomyces cerevisiae J. Weghuber - Mutational analysis of functional domains in Mrs2p, the mitochondrial Mg2+ channel protein of Saccharomyces cerevisiae - FEBS Journal, Vol. 273, No. 6, 2006 |
| 2006 | Charakterisierung der Graphitverteilung in Sphäroguss B. Tomic, B. Harrer, A. Kottar, H. Degischer, L. Zeipper, J. Kastner - Charakterisierung der Graphitverteilung in Sphäroguss - Fortschritte in der Metallographie, Leoben, Österreich, 2006, pp. 113-120 |
| 2005 | Multiresolution denoising of CCD thermal images for improved spatial temperature resolution G. Zauner, G. Hendorfer - Multiresolution denoising of CCD thermal images for improved spatial temperature resolution - Wavelets in Industrial Applications, Boston, Vereinigte Staaten von Amerika, 2005, pp. 12 |
| 2005 | Multiscale segmentation method for small inclusion detection in 3D industrial computed tomography G. Zauner, B. Harrer, D. Angermaier, J. Kastner - Multiscale segmentation method for small inclusion detection in 3D industrial computed tomography - Optical Measurement Systems for Industrial Inspection , Munich, Deutschland, 2005, pp. 10 |
| 2005 | Online inspection of thermo-chemical heat treatment processes with CCD camera system G. Zauner, G. Darilion, R. Pree, D. Heim, G. Hendorfer - Online inspection of thermo-chemical heat treatment processes with CCD camera system - Two- and Three-Dimensional Methods for Inspection and Metrology III , Boston, Vereinigte Staaten von Amerika, 2005, pp. 9 |
| 2003 | Mrs2p is an essential component of the major electrophoretic Mg2+ influx system in mitochondria J. Weghuber - Mrs2p is an essential component of the major electrophoretic Mg2+ influx system in mitochondria - EMBO JOURNAL, Vol. 22, No. 6, 2003 |
Projekte:
Patente:
| 2010 |
Verfahren zur Bestimmung der optimalen Lage eines Objektes für eine 3D-CT-Durchstrahlung C. Heinzl, J. Kastner, M. Reiter, A. Amirkhanov - Verfahren zur Bestimmung der optimalen Lage eines Objektes für eine 3D-CT-Durchstrahlung , 2010 ... |
| 2010 |
Verfahren zur Bestimmung der optimalen Lage eines Objektes für eine 3D-CT-Durchstrahlung C. Heinzl, J. Kastner, M. Reiter, A. Amirkhanov - Verfahren zur Bestimmung der optimalen Lage eines Objektes für eine 3D-CT-Durchstrahlung , 2010 ... |
